PROAIM SR-SBP-02 Quantum Magnetic Shoulder Rig w VCT Base Plate Instruction Manual
- June 3, 2024
- PROAIM
Table of Contents
PROAIM SR-SBP-02 Quantum Magnetic Shoulder Rig w VCT Base Plat
What’s In The Box
Please inspect the contents of your shipped package to ensure you have
received everything that is listed below. 
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or
transmitted by any form or by any means, electronic, mechanical, photo-
copying, recording, or otherwise, except as may be expressly permitted by the
applicable copyright statutes or in writing by the Publisher.
Quantum Magnetic Shoulder Rig Setup
-
Loosen the knob of the base plate and insert a 200mm long rod.
-
Then insert the second 200mm long rod and tighten it properly with the knob, as shown in the image.
-
Loosen the knob on the other side of the base plate and insert the 300mm long rod.
-
Then insert the second 300mm long rod and tighten the knob properly, as shown in the image.
NOTE: There are 15mm (dia) rods on the front and back to accommodate more camera accessories. -
NOTE: It has dual slots that allows quick positioning of your camera & camera accessories.
-
Now attach the handle and tighten the ratchet knob properly.
-
Then attach the second handle and tighten it properly.
-
By pressing the adjustment knob, the angle of the handle can be changed according to your requirement, as shown in the image.
NOTE: It allows your camera set up to sit comfortably on your shoulders by eliminating the discomfort caused by the camera’s weight on your shoulder during shooting. -
Open the shoulder pad, as shown in the image.
-
NOTE: It has a magnet mount system that allows easy access to the camera screws just by flipping the camera base plate.
-
Mount the camera (Not Included) on the shoulder pad and tighten it properly with the help of a screwdriver.
NOTE: The shoulder plate has 1/4″-20 and 3/8″-16 threaded holes for storing additional screws. It has a 3.5″ long slot that allows quick positioning of your camera & accessories to evenly distribute the weight of your camera.
NOTE: Shoulder base plate also supports RED (DSMC2), Arri (Amira and Alexa Mini), Sony (Venice, FS7, FS7M2, F5, F55, EX1, EX3), Canon (C200, C300, C300M2, C700), Panasonic (EVA1, Cinema Verica LT 4k S35), Blackmagic (Ursa Mini), and many other camera models with interchangeable lenses.
YOUR PROAIM QUANTUM SHOULDER RIG W VCT MOUNT
ALL DRESSED UP AND READY TO GO!
Warranty
We offer one year warranty for our products from date of purchase. Within this
period of time, we will repair it without charge for labor or parts. Warranty
doesn’t cover transportation costs nor does it cover a product subjected to
misuse or accidental damage. Warranty repairs are subjected to inspection and
evaluation by us.
Liability: We are not liable for damage caused by products that we do not
supply or from mishandling in transit, accident, misuse, neglect, lack of care
of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissatisfaction, please Contact us
immediately and we promise our utmost support and care until you use our
product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>