SV3C POE HX Series Camera User Guide

: June 5, 2024
: SV3C

SV3C POE HX Series Camera

About Camera

Product should contain

IP Camera* 1
User manual* 1
Screws bag * 1
Power adapter* 1
Network cable* 1

Product interface

How to fit Waterproof lid

Connect camera

Connect network cable to router and plug in power adapter

Connect LAN cable and power to camera, it needs about one minute to self

checking and then start working

Network indicator light (green): always flashing means network data transmission is normal.

Two-ways Connect Camera

Use POE Switch for power supply
Use Power Adapter for power supply

Note:
This is a POE(Power Over Ethernet) Camera:
There are two types of charging with the POE camera

Single cat5 cable for both Power and Data transmission, no need power adapter. (It requires a separate PoE Injector or PoE Switch (both not included).)
There are three types of Poe power supply on the market, 48V, 24V, 12V. Our poe cameras are using the standard Poe type: 48V Poe power supply. Its security level is higher than the other two. The POE function of our camera can work with 48V POE switch with IEEE 802.3af.

Add Camera via LAN Cable

Download “CamHipro” from Google Play (Android Phone) / App Store(iPhone)

or scan the QR code below to get APP information

Android|

IOS

---|---

Add Camera

Please click “Device in use” to add a camera via UID number if you have connected the camera on other devices, UID is in this format ZZZZ-123456-ABCDE

Share camera, please click “Add a sharing device” to scan camera UID QR code, then you can add the camera on a different device.

View Camera

Set Micro SD Card Recording

SD Card Setting and Alarm Setting

Alarm push:
✲ Please open “Receive alarm push” if you need text notifications.
Equipment alarm:
✲ Please open “Motion detection alarm” to make motion detection work.
✲ Click “Adjust motion detection” to adjust the detection area and sensitivity. Drag the frame to change the motion detection zone. You can adjust the sensitivity from 1 to 50, 1 is the lowest setting.
✲ Select “Easy setup”, if you need the motion detection work all days. Click “advanced” button to set motion detection schedule for the camera.
Alarm linkage:
✲ Open “Alarm recording to SD card” after format the SD card if you need motion detection recordings.
✲ Select “Easy setup”, if you need the motion detection work all days. Click “advanced” button to set motion detection schedule for the camera.
✲ Click “Adjust motion detection” to adjust the detection area and sensitivity. Drag the frame to change the motion detection zone. You can adjust the sensitivity from 1 to 50, 1 is the lowest setting.
✲ Open “Alarm capture sent to Email” if you need Email alert with pictures, click “Configure Email” to complete Email settings, for more detailed settings, please refer to the instruction on SV3C website or contact SV3C customer service.
✲ Open “Alarm recording to FTP” and “Alarm capture saved to FTP” if you need to save motion detection recordings and pictures to FTP server. Click “Configure FTP” to complete FTP settings, please refer to the FTP instruction on SV3C website.
✲ Motion detection alarm recording is recommended when the Micro SD card is small.

Schedule Recording Setting

If you select “Easy setup”, the camera will record for 7/24 all days. Click “advanced settings” to set recording schedule for the camera.

Playback Record

Set Camera Time Zone

Note: When your time is DST(daylight saving time), please turn on DS button, otherwise the recording time will be incorrect.

View Via PC

Access to the camera through browser on PC

Set POE camera via browser on PC

Note: If you can’t connect this camera with your NVR, Please try to change your IP Address Keep Fixed, please refer to next page on how to change cameras’ IP Address keep Fixed.

If you want to reset factory about your cameras, just pls restart or reset the camera via mobile phone or PC.

Please download PC software on SV3C website: www.sv3c.com

Connect and manage multiple cameras at a same time via P2P PC Client

software on windows and MAC PC!

More Info

This manual is to help customers to know and use the camera quickly, For detailed instructions and video tutorials please refer to SV3C www.sv3c.com

This manual may have descriptions and operations that do not match the product, If you have any questions or need technical support Please feel free to contact us.
US Email address: info-us@sv3c.com
UK Email address: info-uk@sv3c.com