CONAIR NPTCCS01 Curl Collective Ceramic Pressing Comb User Guide

CONAIR NPTCCS01 Curl Collective Ceramic Pressing Comb

GET TO KNOW YOUR PRESSING COMB

IMPORTANT SAFETY INSTRUCTIONS

When using electric appliances, especially when children are present, basic safety precautions should always be taken, including the following:

READ ALL INSTRUCTIONS BEFORE USING KEEP AWAY FROM WATER

DANGER
Any appliance is electrically live even when the switch is off. To reduce the risk of death or injury by electric shock:

1. Always unplug it immediately after using.
2. Do not use while bathing or in the shower.
3. Do not place or store appliance where it can fall or be pulled into a tub or sink.
4. Do not place in or drop into water or other liquids.
5. If an appliance falls into water, unplug it immediately. Do not reach into the water.

WARNING
To reduce the risk of burns, electrocution, fire, or injury to persons:

1. This appliance should never be left unattended when plugged in.
2. Do not pull, twist, or wrap line cord around appliance.
3. This appliance should not be used by, on or near children or individuals with certain disabilities.
4. Use this appliance only for its intended use, as described in this manual. Do not use attachments not recommended by the manufacturer.
5.  Never operate this appliance if it has a damaged cord or plug, if it is not working properly or if it has been dropped, damaged, or dropped into water. Return the appliance to an authorized service center for examination and repair.
6. Keep the cord away from heated surfaces.
7.  Never use while sleeping.
8. Never drop or insert any object into any opening or hose.
9.  Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
10.  Unit is hot when in use. Do not let heated surfaces touch eyes or bare skin.
11.  Do not place the heated unit directly on any surface while it is hot or plugged in.
12. Never block the air openings of the appliance or place it on a soft surface, such as a bed or couch, where the air openings may be blocked. Keep the air openings free of lint, hair and other debris.
13.  Do not use an extension cord with this appliance.
14. Do not touch hot surfaces of the appliance. Use handles or buttons.
15.  Do not attempt to touch the housing of your appliance near the barrel and teeth, as they are hot when in use.
16. SUPPLIER’S DECLARATION
17.  Do not operate with a voltage converter.
18.  This appliance is not a toy. Keep away from children.

FEDERAL COMMUNICATIONS COMMISSION NOTICE

WARNING:
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:  This device may not cause harmful interference, and  This device must accept any interference received, including interference that may cause undesired operation.

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•  Consult the dealer or an experienced radio/TV technician for help.

SUPPLIER’S DECLARATION OF CONFORMITY

• Brand: Conair
• Model No.: NPTCCS01
• Description: Pressing Comb
• Responsible Party: Conair LLC,
• 1 Cummings Point Road,
• Stamford, CT 06902 203-351-9000
• Standards: FCC Part 15 Subpart B,
• ANSI C63.4-2014

USER MAINTENANCE

Your pressing comb is virtually maintenance-free. No lubrication is needed. Keep all vents and openings clear of dirt and dust. If clean-ing becomes necessary, disconnect the unit from the power source, allow to cool and wipe exterior with a cloth. If any abnormal condition occurs, unplug the unit, allow it to cool, and return it for repair to an authorized service center only. No repairs should be attempted by the consumer.

CAUTION
NEVER allow the power-supply cord to be pulled or twisted. Never wrap the cord around the appliance. Damage will occur at the high-flex point of entry into the appliance, causing it to rupture and short circuit.
Inspect the cord frequently for damage. STOP USE IMMEDIATELY if damage is visible or if unit stops or operates intermittently.

STORAGE  Important
When not in use, your appliance should be disconnected and stored in a safe, dry location, out of reach of children. Do not wrap line cord around the appliance. Allow the cord to hang or lie loose and straight at the point of entry into the appliance.

OPERATING

INSTRUCTIONS
This pressing comb is intended for household use. Use on Alternating Current (60 hertz) only. This unit is designed to be operated at 120V AC. This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.

NOTE:
Do not use this styling appliance on hair extensions.

GETTING STARTED
Plug the styler into a household outlet. Press and hold the button for approximately
1–2 seconds to power on the unit. The default temperature of 250°F will start to blink and turn steady when it has been reached. Press the button repeatedly to quickly adjust the temperature setting to your desired heat setting.Press and hold the 1–2 seconds to turn the unit off.

WARNING:
The pressing comb’sc eramic-coated teeth will get very hot within a few seconds and should not come into contact with the skin after the pressing comb has been turned on.

WARNING:
IF YOU THINK THE POWER IS OFF WHEN THE SWITCH IS OFF, YOU’RE WRONG.

KEEP AWAY FROM WATER

Everyone knows that electricity and water are a dangerous combination. But did you know that an electric appliance is still electrically live even if the switch is off? If the plug is in, the power is on. So when you are not using your appliances, keep them unplugged.

CERAMIC EASY-GLIDE COMB

The easy-glide ceramic-coated surface is one of the latest and best technological advances in hair appliances. The ceramic even-heat distribution produces the ultimate in silky, shiny, healthy-looking hair. You’ll find that hair glides easily through the comb teeth while pressing and that it is easier to clean styling product residue, etc., off the comb after each use. The ceramic surface also helps smooth down flyaways. As you smooth your hair, heat is evenly distributed so that the style you create has a salon-perfect, silky- smooth, shiny finish.

USING INSTANT HEAT AND UNIFORM HEAT RECOVERY SYSTEM
This pressing comb features a heater that maintains constant temperature during use for precision styling.This Instant Heat Technology offers high heat temperature settings, with a temperature range that’s gentle and safe for every type of hair, from the finest to the curliest, and helps you create the look you want. Conair’s professional salon standards of engineering provide you with a uniform and improved heat recovery system that maintains the iron at constant temperatures. There is a constant surge of power to ensure that heat is continuously and quickly delivered for optimal styling results, unlike other units, which lose heat during use. This provides consistent styling power so that every strand of your hair is set with the same level of heat and comes out the same way for a perfect finish.

LIMITED TWO-YEAR WARRANTY (U.S. AND CANADA ONLY)

Conair will repair or replace (at our option) your unit free of charge for 24 months from the date of purchase if the appliance is defective in workmanship or materials. To obtain service under this warranty, return the defective product to the service center listed, together with your purchase receipt. California residents need only provide proof of purchase and should call 1-800-3-CONAIR for shipping instructions. In the absence of a purchase receipt, the warranty period shall be 24 months from the date of manufacture.
ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE 24-MONTH DURATION OF THIS WRITTEN, LIMITED WARRANTY. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you.
IN NO EVENT SHALL CONAIR BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. Some states do not allow the exclusion or limitation of special, incidental, or consequential damages, so the above limitation may not apply to you. This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state.

TEXTURE TARGETED HEAT RANGE™

This comb’s unique 9 high-heat temperature settings and Instant Heat Technology provide styling versatility for all hair types. If you have fine hair, a low temperature will provide the best results. If you have thick, wavy hair, keep the heat setting on high. You can vary the iron’s temperature according to your needs.The temperature settings range from250°F-450°F for customized styling. Below are suggested ranges for your hair texture. Press the button repeatedly to adjust the temperature setting.

PRESET SETTINGS
The styler has three preset buttons: wavy, curly and coily. Press and hold your desired setting, depending on your hair texture, for approximately 1–2 seconds. The default temperature for the texture selected will be set. To change the temperature, press the button repeatedly.

TO STRAIGHTEN HAIR
Hair should be clean and completely dry before using comb. For best results, use a light styling product before blow-drying hair.

1. Start with a hair section that is 2 inches wide and no more than ½ inch thick.
2. While maintaining tension, slowly pull the unit down along the hair section toward the ends of the hair.
3. Continue on additional sections of hair until you achieve the hairstyle you desire. It may be necessary to repeat the process on certain areas, depending on the texture of your hair.Some practice is necessary when learning to use this pressing comb. After using comb several times, you will learn the ideal way to straighten and style your hair easily.
   NOTE:
   Please refer to the Preset Setting for heat settings.

References

• Conair LLC Consumer Products for Haircare, Beauty, Wellness, Home and Travel
• Welcome | Conair

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>