Shell ROTELLA SH924 Jump Starter Portable Power User Guide

ITM. / ART. 1593176

Jump Starter
Portable Power
SH924
User Guide

For Your Safety

Thank you for choosing this Shell product. Please read the following instructions and keep them for future reference. This instruction manual contains important information on the safe operation and use. To ensure long life and performance reliability, please operate and maintain as per the instructions on this sheet.

Product Details

Jump Starter

1. Light Switch
2. LED Light
3. ON/OFF Switch
4. DC Input Port
5. USB Output Port
6. LED Battery Level Indicator
7. Jumper Cable Indicator 8. Magnetic Base

Smart Jumper Cable

Package Includes

Product Features

• Designed for vehicles with 11.0 L gasoline and 8.0 L diesel engines
• 8 levels of safety protection
• A powerful magnetic base allows hands-free use
• Integrated LED light with 3 light settings: White Floodlight, SOS, Red Alert Strobe

Operating Instructions

IMPORTANT! CHARGE IMMEDIATELY AFTER PURCHASE, AFTER EACH USE, AND EVERY THREE MONTHS, OR WHEN THE BATTERY LEVEL FALLS BELOW 50%, TO PROLONG THE INTERNAL BATTERY LIFE.

Charging the Jump Starter

1. Connect the DC Terminal of the included adaptor to the input port of the jump starter.
2. Connect the input terminal of the adaptor to an external AC outlet.
3. The LED battery level indicators start flashing. (Please refer to the following table for charging status)
4. When charging is completed, the LED indicator will stop flashing.
5. Disconnect the adaptor from the outlet and remove the charging cable from the jump starter.

Battery Level Indicator Chart

LED Status
(● ON O OFF)| | | | |
---|---|---|---|---|---
Power Status| 0% – 25%| 25% – 50%| 50% – 75%| 75% – 100%| 100%
fully charged

Jump-Starting Vehicle
The jump starter is intended to jump-start a vehicle with a gasoline/diesel engine using a 12V battery.

Before connecting to the battery

1. Verify the voltage of the battery. The information can be found in the vehicle’s owner’s manual.
2. Make sure the power loads such as headlamps, air-conditioning, and radio are turned off.
3. Press the switch to check the internal battery level to ensure that there is sufficient battery capacity to jump-start a vehicle. (Refer to the following table for more information)

Note: The required capacity to jump-start a vehicle

Connecting to the vehicle battery

1. Connect the red battery clamp to the positive (+) terminal and the black battery clamp to the negative (-) terminal on your vehicle’s battery.

2. A) Once clamps are properly connected, the green LED jumper cable indicator will turn solid from flashing. You may now try to start your vehicle.
   B) Otherwise please refer to the following jumpstart troubleshooting table for corresponding solutions.
   

3. After the engine starts, disconnect the battery clamps from the battery terminals.

Troubleshooting Table

Jumper Cable Indicator| LED Light (front)| Cause| Solutions
---|---|---|---
Green| Red
Solid| Off| Off| | Jumpstart the vehicle
Off| Flashing| On| Low battery protection| Please charge the jump starter
Flashing| Flashing| On| Reverse charge protection|

The car battery voltage is higher than the voltage of the starting power supply.

Please check the voltage of the vehicle’s battery; it mov be greater than 12V.

Off| On| On| Reverse polarity protection/ short-circuit protection| Disconnect the damps from the vehicle’s battery. Follow jump-starting vehicle instructions to jump-start the vehicle.
Off| Flashing (4 times per second, cycle after the 1-second interval)| On| Over-temperature protection| Disconnect the clamps from the vehicle’s battery. Let the jump starter cool down by putting it in a cool and ventilated place.
Jump started 4 consecutive times within 10 minutes|

Do not jump-start more than 4 times.

Disconnect the clamps from the vehicle’s battery. Unplug the jumper cable from the jump starter.

Consult a mechanic.

Flashing| Off| Off| Clamps are not connected to the battery| Disconnect and reconnect the clamps to the battery

Charging Portable Devices

1. Connect your portable device with one end of the included USB cable, and insert the other end to the output port of the jump starter.

2. Press the power switch to turn on the jump starter and start charging.
   Charging will begin as soon as the jump starter turns on.
   

3. Once the charging is completed, disconnect your portable device and unplug the USB cable from the jump starter.
   

Compatible with: smartphones, tablets, digital cameras, mobile gaming devices, wireless earphones, and more
Note: Charging time will vary depending on the portable device and the device’s battery capacity.

Using the LED Light

1. To switch on the LED light, press and hold on the ON/OFF switch for 2 seconds.

2. Press the ON/OFF switch to toggle through 3 lighting modes:
   

3. Press and hold the ON/OFF switch for 2 seconds under any lighting mode to turn off the LED light.

Specifications

Jump Starter
Start Voltage: 12V
Start Current: 1000A
Peak Current: 2000A
Input: 18V 1A
USB Output: 5V 2.1A
Battery Type: Lithium-Polymer
Battery Capacity: 24000mAh, 88.8Wh
Operating Temperature: – 20ºC ~ 60ºC
Storage Temperature: – 20ºC ~ 40ºC
Charging Temperature: 0ºC ~ 45ºC
Dimensions: 4.72 x 5.24 x 10.24 inches/120 x 133 x 260 mm
Weight: 3.66 lb/1660 g (without adapter and USB cable)

Adapter
Input: 100 – 240V ~ 50/60Hz 0.6A Max
Output: 18V 1A

The symbol indicates direct current (DC)

Safety Instructions

Failure to follow the instructions may cause serious injury, death, or property damage
Risk of electric shock, explosion, and fire Risk of explosive gases

• Do not attempt to jump-start your vehicle more than four consecutive times. If the vehicle does not start after four consecutive attempts, consult a mechanic.

• The product may become warm under extended high-power operation.

• Do not disassemble, modify or repair this product.

• Do not destroy products by crushing or cutting.

• Do not expose the product to fire, rain, snow, sunlight, and heat.

• Keep this product away from water and other liquids.

• Keep this product in a dry place. Do not allow the product to get wet

• Use the product in a well-ventilated area. Do not operate in explosive atmospheres such as areas of flammable gas, dust, and liquid.

• Do not use this product in the event of electrolytic liquid leaks, strange odors, overheating, color change, or when any other peculiar occurrence is detected.

• Handle the product with care. Do not use the product when it is damaged. Do not operate with damaged jumper cable or clamps.

• Clean this product only with a dry cloth. Avoid using cleaning products with rough or chemical substances.

• Do not look directly into the light as it may cause serious eye injuries.

• This car jump starter is for use with gasoline or diesel engine vehicles using a 12V battery only. The use of this jump starter on a vehicle that does not have a 12V battery may cause serious damage to the vehicle, the jump starter, and/or serious injury to the user. Refer to the owner’s manual of the vehicle for the battery voltage.

• The product should not be charged while in contact with flammable material like textiles.

• When charging the jump starter, use the USB cable and car charger/adapter that is provided in the package (accessories included in the package vary depending on the model). When using a different USB cable, charger, or adapter, make sure it is certified according to the safety standards in your country/region.

• Use the accessories that are provided in the package. Shell is not responsible
  for any damage or injury when using accessories that are not provided by us.

• Do not put the jump starter directly above the vehicle battery during a jump

• Do not jump-start a vehicle while recharging the internal battery.

• Do not allow the clamps to touch each other.

• Keep out of reach of children.

Personal Precautions

• Wear adequate eye protection and protective clothing when working near a vehicle battery.
• Do not smoke or allow a spark or flame near the battery or engine.
• Remove all metal objects such as rings, bracelets, and watches.
• Have plenty of fresh water and soap nearby in case of battery acid contact with eyes, skin, or clothing.
• If battery acid comes in contact with the skin or clothing, immediately wash with soap and water. If the acid enters the eye, immediately flood the eye with running cold water for at least 10 minutes and seek immediate medical attention.
• Beware not to drop metal items on the battery. It might cause sparks or short-circuit the battery.
• Consider having someone nearby to come to your aid in case of emergency.
• Incompatible or damaged vehicle batteries may explode when used with this product.

Battery Disposal

This product contains a rechargeable battery which must be recycled or disposed of separately from household waste. Dispose of batteries according to your local environmental laws and guidelines.

Cautions

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Howev­er, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: reorient or relocate the receiving antenna; increase the separation between the equipment and receiver; connect the equipment into an outlet on a circuit different from that to which the receiver is connected; consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

CONFORMS TO UL STD.2743
ENERGY PERFORMANCE VERIFIED

Made in China

Shell Two (2) Years Limited Warranty

Shell warrants that this product (the “Product”) will be free from defects in material and workmanship for a period of two (2) years from the date of purchase (the “Warranty Period”). For defects reported during the Warranty Period, Shell wi I, at its discretion, and subject to Shell’s product support analysis, either repair or replace defective Product. Replacement parts and products will be new or serviceably used, comparable in function and performance to the original part, and warranted for the remainder of the original Warranty Period. SHELL’S LIABILITY HEREUNDER IS EXPRESSLY LIMITED TO THE REPLACEMENT OR REPAIR OF THE PRODUCT. TO THE MAXIMUM EXTENT PERMITTED BY LAW, SHELL SHALL NOT BE LIABLE TO ANY PURCHASER OF THE PRODUCT OR ANY THIRD PARTY FOR ANY SPECIAL INDIRECT, CONSEQUENTIAL OR EXEMPLARY DAMAGES, INCLUDING BUT NOT LIMITED TO, LOST PROFITS, PROPERTY DAMAGE, OR PERSONAL INJURY RELATED IN ANY WAY TO THE PRODUCT HOWSOEVER CAUSED, EVEN IF SHELL HAD KNOWLEDGE OF THE POSSIBILITY OF SUCH DAMAGES. THE WARRANTIES SET FORTH HEREIN ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, AND THOSE ARISING FROM THE COURSE OF DEALING, USAGE, OR TRADE PRACTICE. IN THE EVENT THAT ANY APPLICABLE LAWS IMPOSE WARRANTIES, CONDITIONS, OR OBLIGATIONS THAT CAN NOT BE EXCLUDED OR MODIFIED, THIS PARAGRAPH SHALL APPLY TO THE GREATEST EXTENT ALLOWED BY SUCH LAWS.

This Limited Warranty is made solely for the benefit of the original purchaser of the Product from Shell or its approved reseller or distributor and is not assignable or transferable. To make a warranty claim, the purchaser must (1) request and obtain a return merchandise authorization (“RMA”) number and return location information (the “Return Location”) from Shell Support by emailing [email protected] or by calling 1.833.990.2624; and (2) send the Product, including RMA number and receipt to the Return Location provided.

DO NOT SEND IN A PRODUCT WITHOUT FIRST OBTAINING AN RMA FROM SHELL SUPPORT. THE ORIGINAL PURCHASER IS RESPONSIBLE (AND MUST PREPAY) ALL PACKAGING AND TRANSPORTATION COSTS TO SHIP PRODUCTS FOR WARRANTY SERVICE. NOTWITHSTANDING THE ABOVE, THIS A LIMITED WARRANTY IS VOID AND DOES NOT APPLY TO PRODUCTS THAT: (a) were misused, mishandled, subjected to abuse or careless handling, accident, improperly stored, or operated under conditions of extreme voltage, temperature, shock, or vibration beyond Shell’s recommendations for safe and effective use; (b) improperly installed, operated or maintained; (c) are/were modified without the express written consent of Shell; (d) have been disassembled, altered or repaired by anyone other than Shell; (e) had defects which were reported after the Warranty Period. THIS LIMITED WARRANTY DOES NOT COVER (1) normal wear and tear; (2) cosmetic damage that does not affect functionality; or (3) Products where the Shell serial and/or lot number is missing, altered or defaced.

For any questions regarding your warranty or product contact Shell Support at:

[email protected]
(North America)

1-833-990-2624
M-F 9 am – 5 pm
Eastern Standard Time

Camelion North America Inc.
2572 Daniel-Johnson Blvd. | 2nd Floor
Laval, QC, H7T 2R3, Canada

Jump Starter
Portable Power

SH924

SH SH924 IN ENG D10043R3
Printed in China

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>