aiwa MI-X290 Flicker Portable Party Speaker User Manual
- June 5, 2024
- Aiwa
Table of Contents
aiwa MI-X290 Flicker Portable Party Speaker
Caution
- Keep the speaker and its accessories away from the reach of kids as they might cause a choking hazard.
- Keep the speaker away from fire, water, liquids, extreme heat, and strong magnetic fields.
- Do NOT use this speaker at high volume for extended periods, as this may cause permanent hearing damage or loss.
- Do NOT drop or knock the speaker on hard surfaces.
- Do NOT use chemicals or detergents to clean the speaker.
- Do NOT scrape the surface with sharp objects.
- Do NOT make unauthorized alterations to this product.
Package Contents
- MI-X290 Flicker Portable Party Speaker x1
- USB Type-C Charging Cable x1
- 3.5mm Audio Cable x1
- User Manual x1
Product Diagram
Specifications
Model Number | MI-X290 Flicker |
---|---|
Bluetooth Version | BT5.0 |
Bluetooth Pairing Name | AIWA Flicker |
Speaker Output Power | 40W |
Product Size | 116.5mm x 116.5mm x 222mm |
Drivers
| 78mm middle range subwoofer,4ohm, 30W×1
50mm tweeter, 4ohm, 15W×2
Time
| Charging: About 4-5 hours Working: About 5-12 hours
Frequency Range| 70Hz-20KHz
THD| ≤10% at 1KHz 10W
S/N| ≥72dB
True Wireless Stereo| Yes
Music Source Input| Support Bluetooth / AUX / TF-card in / USB Disk
Operating Instructions
Items | Opera � on Method | LED status |
---|---|---|
Power On |
Long press bu�on
| Blue LED On
Power Off|
Long press bu�on
| Blue LED Off
Bluetooth Pairing
| Turn on speaker, Choose Bluetooth AIWA Flicker
to match
|
Blue LED flashes
Bluetooth Successful
Paired
| /| Blue LED solid
Disconnect Bluetooth| Press and hold the” +” and
“-“ bu�on together for 2 seconds
|
Blue LED flashes
TWS Pairing(two speakers connect)
| Under the not pair situa�on, Long press one
of the speaker’s
bu�on to start TWS pairing
|
Slave speaker Bluetooth LED on, master Bluetooth LED Flash.
TWS Successful Paired With phone| A�er two speaker connect, connect speaker
by phone
|
Blue LED ON
Disconnect TWS
| Press and hold the bu�on| Blue Bluetooth LED Flash
Mode Changes
|
Short press bu�on,
Switch Bluetooth/AUX/USB/TF
|
Rela�ve LED color ON
AUX Mode | Insert AUX cable to AUX port | Green LED on |
---|---|---|
TF Card Mode | Insert TF Card to the TF port | Green LED on |
USB Flash Disk | Insert U disk to U disk port | Green LED on |
Volume + | Short press the “+ “bu�on | / |
Volume – | Short press the” – “bu�on | / |
Previous Song | Long press the “– “bu�on | / |
Next Song | Long press the” + “ bu�on | / |
Pause/Play |
short press bu�on
| /
Receive a call| Short press the when a call in| /
Reject a call|
Long press the when a call in
| /
Hang up| Short press the when on a call| /
Low ba�ery warming| When ba�ery lower than
20%
| White Ba�ery LED
flash
Low Ba�ery shutdown| When ba�ery lower than 10%| /
Reset| Insert needle into the reset bu�on
�ll speaker power off
| LED off
Charging| Insert DC 5V adapter| Red LED on
Charge Finished| /| Red LED off
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>