DOMO DO7317M Powerful Room Heater Instructions
- June 3, 2024
- DOMO
Table of Contents
DO7317M Powerful Room Heater
Instructions
WARRANTY
this appliance has a two-year warranty period. During this period the
manufacturer is responsible for any failures that are the direct result of
construction failure. When these failures occur the appliance will be repaired
or replaced if necessary. the warranty will not be valid when the damage to
the appliance is caused by wrong use, not following the instructions, or
repairs executed by a third party. the guarantee is issued with the original
till receipt. All parts, which are subject to wear, are excluded from the
warranty. If your device breaks down within the 2-year warranty period, you
can return the device together with your receipt to the shop where you
purchased it.
Tel. 379 789 684 nebo na servis@domo-elektro.cz , tel. 379 422 550
Name……………………………………………..
Address………………………………………….
Date of purchase…………………………
Tel.: ……………………………………………..
RECYCLING INFORMATION
This symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead, it must be brought to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. for more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product. the packaging is recyclable. please treat the package ecologically.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or a similarly qualified person in order to avoid a hazard.
SAFETY INSTRUCTIONS
This appliance may be used by children from the age of 8 and up, and also by persons with a physical or sensorly limitation, as well as mentally limited persons or persons with a lack of experience and knowledge. But only on the condition that these persons have received the necessary instructions on how to use this appliance in a safe way and know the dangers that can occur by using this appliance. Children cannot be allowed to play with the appliance. Maintenance and cleaning of the appliance may not be done by children, unless they are older than 8 years old and are under supervision. Keep the appliance out of reach of children younger than 8 years old. this appliance is suitable to be used in a household environment and in similar surroundings such as
- Kitchen for personnel of shops, offices or other similar professional surroundings
- farms
- hotel or motel rooms and other surroundings with a residential character
- Guest rooms or similar
Attention: This appliance cannot be used with an external timer or a
separate remote control.
** The appliance can become hot during use. Keep the power cord away from
hot parts and don’t cover the appliance.
Read these instructions before using this appliance:**
- Do not carry out any changes to the appliance.
- Do not use the heater outdoors.
- this heater is meant for use in bathrooms, laundry areas or similar locations indoors. Never put the heater in a place where it may fall into a bathtub or other water container.
- Do not use the heater in the immediate surroundings of a bathtub, shower or swimming pool.
- Do not put any combustible or chemical objects near the heater.
- the heater should not be placed right beneath a socket.
- this heater is not equipped with technology that can control the room temperature. Do not use this heater in small rooms where people are present that can not leave the room by themselves unless they are under constant supervision.
- Do not cover the heater to avoid overheating and fire.
- Do not touch hot surfaces of the heater during use. You could burn yourself.
- Keep combustible materials like drapery at least 1 meter away from the front of the heater and keep them away from the sides and back
- Keep foreign objects away from the openings in the heater as this may cause electric shock, fire or damage.
- Always unplug the heater when it is not in use.
- Only use well-grounded sockets to plug in the appliance.
- Never use a damaged cord or plug. If the cord is damaged, it should be replaced by the manufacturer, the dealer or a qualified person to avoid a hazard.
- the use of an extension cord is not recommended, as this may cause overheating and fire. However, if it is still necessary to use an extension cord, then use a cord with a conductor wire that is at least 1mm in diameter and that rates no less than 13Amp.
- Do not run the cord under a carpet or do not cover the cord with rugs, runners or other similar materials. Put the cord away from the traffic area and in a place where people can not trip over it.
- Only use this heater as described in this manual. If the appliance is used for other ends, this may cause fire, electric shock or injuries.
- Repairs and maintenance should only be conducted by qualified persons or services.
- plastic bags are not toys. Keep them away from infants and children as they contain a risk of suffocation and other dangers.
- If you are not around for several hours, consider lowering the temperature setting.
- Caution: Keep the appliance at a minimum distance of 0,60m (volume 3) from the bathtub or shower, as 36 indicated in the drawing. A person who is in the bathtub or shower should not be able to touch the appliance, the power cord or the control knobs.
PARTS
Appliance:
- front
- Side
- handle
- Control panel
Control panel
- thermostat knob
- “Max”
- Anti-frost
- function button
- light indicators
- On/off switch
Installation kit
1. feet
2. Wall mounting bracket
3. Screw for wall mount
4. Anchors for wall mount
5. lower wall mounting brackets
6. Screw M3 x 5| 7. Screw M3 x 8
8. Washer for screw M3 (6. + 7.)
9. Support for feet
10. Screw with washer M3 x 8
11. Screw with washer M4 x 8
---|---
INSTALLATION
- Carefully remove all parts from the packaging and remove all the packaging materials from the parts (plastic bags, foam,…) Check for possible damage of the appliance, that may have happened during transportation. If anything has been damaged or if a part is missing, contact your dealer. Keep the original box to store the heater when it is not being used.
- Make sure that the appliance is switched off before plugging in the heater. Caution: the socket has to be well-grounded.
- use the handle to move the heater.
- When the heating is mounted to the wall, we recommend placing the heating at least 30cm above the floor and 100cm below the ceiling. Also, make sure you leave a free space of 100cm before the front and next to the sides of the appliance.
Installation of the feet
- Screw the support (9) onto the feet.
- Screw the two feet onto the heater.
Wall mount
- Drill 2 holes in the wall, 7cm next to the side of the appliance and 100cm above the floor. place 2 plugs (4) into the holes, using a hammer. fasten the wall mounting bracket (2) in the plugs, using the matching screws (3).
- fasten the lower wall mounting bracket (5) to the back of the appliance, using the matching screws (6).
- place the appliance on top of the upper wall mounting bracket. Now you can mark the lower wall mounting bracket onto the wall with a pencil. Remove the appliance and drill 2 holes for the lower wall mounting bracket in the place you just marked.
- put the plugs (4) into the holes for the lower wall mount, using a hammer.
- place the appliance on top of the upper wall mounting bracket. use the screws (3) to secure the lower wall mounting bracket to the wall.
USE
READ ALL INSTRUCTIONS CAREFULLy BEFORE USING THE APPLIANCE.
- Make sure that the thermostat knob is set to the “max”-position. Make sure that the on/off switch is set to “off” (0). plug in the heater.
- Switch on the appliance, the red light indicator will light up. Press the function button to select the desired heat setting (I, II or III). to start, set the heat setting to III, so that the heater operates at full force.
- Now turn the thermostat knob to determine the room temperature. turn clockwise to heighten the temperature, and counterclockwise to lower the temperature.
- When the room has reached the desired temperature, the appliance will shut off automatically and the green light indicator will light up. the appliance will switch on again automatically when the room temperature drops lower than 3°C below the set temperature.
- the anti-frost setting makes sure that the room temperature will not drop below the freezing point.
MAINTENANCE
- Switch off the appliance, remove the plug from the socket and let the appliance cool down before cleaning it.
- Never immerse the plug, cord or appliance itself in water or another liquid. Never pour water or another liquid onto the appliance.
- use a vacuum cleaner to remove dust and dirt from the metal grid of the appliance.
- use a dry cloth to remove dust from the appliance. If there are stains on the appliance, you can use a damp (not wet) cloth.
- Do not use any detergents, abrasive products or scrubbing products on the heater. these could damage the coating of the appliance.
STORAGE
Always store the appliance in a cool, dry place. to avoid dust on the
appliance, you can use the original packaging to store the appliance.
LINEA 2000 – Dompel 9
2200 Herentals Belgium
Tel 014/21.71.91
Fax : 014/21.54.63
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>