HONCAM HC-S37X5 Ultra Mini Bluetooth Audio Adapter for PS5 wireless controller User Manual
- June 5, 2024
- HONCAM
Table of Contents
UltraMini
Bluetooth Audio Adapter
For the PS5 wireless controller
User Manual
Model: HC-S37X5
function definition
①Power input port: Type-c female port
②Audio Source input / output port: 3.5mm audio plugs
③Speaker volume +
④MIC recording hole
⑤Speaker mute button
⑥Power switch/ Pairing key
⑦Speaker volume –
Product size
L 75mm x W 25mm x H 24mm
Applicable platform
PS5 wireless controller
Product briefing
- This product is compatible with a wide range of Bluetooth headphone equipment.
- Plug and play, convenient and no constraints.
- The design is ingenious and simple. According to the ergonomics design, the sense of grip is comfortable.
- Bluetooth 5.1 technology with signal stability and anti-interference, continuous frequency, sound quality without distortion, and low latency sound is adopted.
- One-click to mute speaker volume, convenient operation.
- Adjustable speaker volume size, convenient operation.
- Powered by built-in batteries, recharged while used.
- One-to-one usage.
Electrical parameters
Working distance: 10-meter | Operating frequency range: 2.402GHZ-2.480GHZ |
---|---|
Bluetooth version: 5.1 | Support audio format:SBC |
Input voltage: DC 5V | Charging current: 90mA |
charging time: 1.2 hours | Working time: 3 Hour |
Working voltage: 3.7V | Working current: 35mA |
Battery capacity: 100mAh | Batteries: lithium polymer batteries |
MIC sensitivity: -38±2dB (OdB=1V/Pa at 1KHz) | G.W of adapter:10g |
Indicator light:
- Mute key: After the speaker mute starts, the blue light on the key symbol is extinguished; after canceling the mute, the blue light is always on.
- Power key: After power on, the reconnect mode, the blue light flashes; Enter the pairing mode, red and blue lights alternately flash; after the connection is successful, the blue light is always on; when external charging, the red light is always on; after the full charged, the red light is off and the blue light is always on.
- Volume+/volume-key: After power on, the blue light flash. After the connection is successful, the blue light is always on.
Key function description
- Volume+: this key is to control the increase in the volume of the loudspeaker sound. It has a warning tone when you can’t increase the volume.
- Volume-: this key is to control the reduction in the volume of the loudspeaker sound. It has a warning tone when you can’t reduce the volume.
- Speaker mute key: Press this button to mute the Bluetooth headset speaker, blue indicator lights turn off; press again, cancel the mute function, blue indicator light turn on.
- Power key: Press it for 2 seconds to turn it on; press it for 2 seconds to turn it off.
Operating instruction
-
Plug this product into ps5 dual sense, when the dual sense is successfully connected to the PS5 console, press the power button for 2 seconds to turn it on (at this time, the blue light is slowly flashing, enter reconnection mode. It will reconnect with a headset that paired successfully before).
Then, press the power key again, the red and blue lights are alternately flashing, and it will automatically pair a new headset. After the connection is successful, the indicator light turns to blue, and you could use your headset. -
Reconnection timeout: the product automatically turns off if can’t find a signal or after over 5 minutes of reconnect
-
Using while charging: While the product working, you can insert a Type c charging cable, and won’t disconnect with your headset when you charging.
-
Automatic reconnection: press the power button for 2 seconds to turn on, at this time, the blue light is slowly flashing, enter reconnection mode.
It will reconnect with a headset that paired successfully before. The indicated light turns to blue if reconnect successfully. -
Automatic pairing: press the power button for 2 seconds to turn it on, then press it again, the red and blue lights are alternately flashing, and it will automatically pair a new headset. After the connection is successful, the indicator light turns to blue
【assembly drawing】
Insert the 3.5 audio port of the product into the audio jack of the
controller.