aiwa EB-X850AANC Active Noise Cancelling Headphone User Manual

June 5, 2024
Aiwa

EB-X850AANC Active Noise Cancelling Headphone
User Manual

Important Safety Instructions

  1. Please do not place the device near any form of heat source.
  2. Please use the accessories specified by the manufacturer.
  3. Please refer all servicing/repairs to qualified personnel should there be any form of damage to the device.
  4. Keep this user manual for future reference/troubleshooting.
  5. Please heed ALL safety cautions.

Safety Cautions

  1. Always keep the device AWAY from fire and heat sources.
  2. Do NOT attempt to disassemble or alter the device.
  3. Do NOT expose the device to excessive heat (Direct sunlight etc.).
  4. Do NOT immerse the device into any form of liquids.

Warnings

Using earphones/headphones at moderate to high volumes for extended periods of time will result in permanent hearing damage. We recommend that you always keep the media playback volume level from low to moderate. Please do not use earphones while performing activities that require hearing surrounding noises/sounds. (Driving, Cycling, jogging, etc.)

Product Overview

aiwa EB X850AANC Active Noise Cancelling Headphone - Product
Overview

Unboxing

  • EB-X850AANC Headphones
  • 3.5mm Audio Cable
  • Micro-USB Charging Cable
  • User’ s Manual
  • Carrying Case

Please refrain from using any damaged components. Contact your local authorized AIWA distributor/customer service should you need any assistance.

Product Specifications

Model Number: EB-X850AANC
BT Version: V5.0
Active Noise Cancellation: 20dB
Driver unit: 40mm
Frequency Response: 20~20kHz
Impedance: 32Ω + 15%
Microphone Sensitivity: -42 dB
Headphone Sensitivity: 97dB + 3dB
Supported Profiles: HSP/HFP/A2DP/AVRCP/AAC/SBC
Transmission Distance (Estimated): 10 Meters (No Obstacles)
Battery: 3.7V/250mAh (Li-on)
Charging: DC 5V/500mA Charger
Playback/ Call Time: Up to 11 Hours (BT, ANC ON)
Standby Time: Up to 300 Hours
Charging Time : 3 Hours

The above are estimated values tested in a practical environment and may vary upon individual usage habits.

Product Usage Guide

MFB (MULTI-FUNCTIONAL BUTTON):

  • Power ON/OFF: Press and hold for three (3) seconds.
  • Answer/End Calls: Click once (1).
  • Reject Calls: Press and hold for two (2) seconds.
  • Dial last called number: Double click.
  • Play/Pause music: Click once (1).

ANC (ACTIVE NOISE CANCELLATION) BUTTON: Turn ON/OFF ANC: Press and hold for one (1) second.
“+” BUTTON:
Increase Volume: Click once to adjust the volume level.
Next Song: Press and hold.
“-” BUTTON:
Decrease Volume: Click once to adjust the volume level.
Previous Song: Press and hold.

AUDIO PLAYBACK VIA AUX 3.5mm PORT :
Connect the 3.5mm audio cable to your audio source and headphones. This automatically switches headphones to “Passive mode” where power is not drawn from the in-built batteries of the headphones.

Connecting the Product

aiwa EB X850AANC Active Noise Cancelling Headphone - Connecting the
Product

  1. Turn on Bluetooth (BT) on your mobile device.
  2. Turn on your Headphones. (Headphones will enter BT pairing mode)
  3. Search and connect to ” EB-X850AANC” from your mobile device
    EB-X850AANC will automatically connect to the last paired device if the device is on and
    within connection range.

Connecting the Product
EB-X850AANC can connect to up to 2 mobile devices at the same time.
To pair with two (2) devices:

  1. Turn on Bluetooth (BT) on your mobile device A.
  2. Turn on your Headphones. (Headphones will enter BT pairing mode)
  3. Search and connect to “EB-X850AANC” from mobile device A.
  4. Turn off BT on mobile device A, and repeat the above for mobile device B.
  5. Turn on Mobile device A again and the headphones will pair to both devices automatically.

Call Control while connected to 2 devices.

It will automatically prioritize incoming calls/ notifications and audio playback (Pause music on one device, and play music on the other)

aiwa EB X850AANC Active Noise Cancelling Headphone - Control
while

Battery & Charging

Charging: Red Indicator Light
Full Charge: Extinguished Indicator Light

Approximate charging time: 2 Hours
EB-X850AANC will turn off automatically after 5 minutes of disconnection/inactivity.
Please charge the headphones every six (6) months.

Customer Service

Please visit www.int-aiwa.com for more product information.
Contact your local authorized dealer/ customer service by referring to the warranty label/receipt provided with your purchase.

Aiwa Electronics Int’l Co., Ltd.
Explore more atwww.int-aiwa.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals