aiwa MI-X 30 Katana X Wireless Speaker User Manual

aiwa MI-X 30 Katana X Wireless Speaker

Important Safety Instructions

1. Please do not place the device near any form of heat source.
2. Please use the accessories specified by the manufacturer.
3. Please refer all servicing/repairs to qualified personnel should there by any form of damage to the device.
4. Keep this user manual for future reference/ troubleshooting.
5. Please heed ALL safety cautions.

Safety Cautions

1. Always keep the device AWAY from fire and heat sources.
2. Do NOT attempt to disassemble or alter the device.
3. Do NOT expose the device to excessive heat (Direct sunlight etc.).
4. Do NOT immerse the device into any form of liquids.

Unboxing

1. AIWA MI-X30 KATANA X Speaker
2. Type-C Charging Cable
3. 3.5mm AUX Cable
4. User Manual

Product Specifications

Audio Related

• Frequency Response: 150Hz – 15kHz
• Signal to Noise Ratio: ≥70dB
• Drivers: 2 x 53mm (4Ω)

Power & Battery

• Power Output: 2 X 5W
• Playback Time: 4-15 Hours (Varies by volume level & content)
• Charging Time: 5 Hours
• Charging Current: DC 5V /500mA Type C
• Battery: Built-In Lithium-Ion (3.6V / 2000mAh)

Transmission Standards

• BT Version: V5.0
• BT Profile: A2DP V1.2; AVRCP V1.4，GAVDP V1.2 V1.2; SPP V1.2; AVCTPV1.2
• Physical Dimensions
• Size: 190.2 78.158.5 mm
• Weight: 650g

Other Attributes

• IP Rating: IPX5

1. Protected against low pressure water streams from any angle, please DO NOT submerge the speaker in any liquids.
2. Please ensure all exposed ports are sealed & all cable connections are removed before any form of liquid exposure.
3. The above playback & charging times are estimated values tested in a practical environment and may vary upon individual usage habits.

Product Overview

Connecting the Product

1. Turn on Bluetooth (BT) on your mobile device.
2. Turn on the speaker.
3. Search and connect to “AIWA Katana X” from your mobile device.
4. Press and hold both “Volume Up +” & “Volume Down – “ button to disconnect BT.

MI-X30 automatically reconnects to the last paired mobile device it was connected to. MI-X30 saves up to 8 paired devices.

TWS Function

Synced audio playback from two (2) speakers for a true wireless stereo experience. (Only compatible with the same speaker model: MI-X30 Katana X)

• Turn on both speakers.
• Double Click the Power button on BOTH speakers until a notification prompt beep is heard.
• Connect to one of the speakers via BT on your mobile device.
• TWS (True Wireless Stereo) playback is now available.

Listening to music from the external audio source

USB Playback

Insert USB Disk into the designated port. (Supports MP3, WAV, APE, FLAC, WMA)

AUX-IN

Connect speaker and Audio source via a 3.5mm AUX Cable.
Note: Under Aux – In Mode, Next track/Previous track/Call Control functions are not available.

Micro SD Playback

Insert the Micro-SD card into the designated port. (Supports MP3, WAV, APE, FLAC, WMA)

Battery & Charging

Connect the speaker to a suitable power source via the Type-C Charging Cable.

LED Indicator Light

• Blinks RED: Low Battery (< 10 %)
• Solid RED: Charging in progress
• RED Light extinguishes upon the full charge
• Approximate charging time: 5 Hours
• Please fully charge up the speaker prior to first time usage.

Perform Factory Reset

1. Turn on the speaker.
2.  Insert a pin ( < 3mm Φ ) into the reset hole button for two (2) seconds until the LED Indicator light turns off.

Aiwa Electronics Int’l Co., Ltd. Explore more at www.int-aiwa.com

(Click Once) Call Control (Answer/ End Call: Click Once) (Reject Call: Press and Hold) (Re-dial last number: Press and Hold) Mute (Click Once)
Mute function is only available during AUX Playback mode

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>