xencelabs K02-A Quick Key User Guide

: June 5, 2024
: xencelabs

Table of Contents

What’s in the Box
Initial Setup
Quick Keys Features
Connect Wirelessly
Device Charging
Product Registration
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Quick Start Guide
Xencelabs Quick Keys

What’s in the Box

Xencelabs Quick Keys

xencelabs K02 A Quick Key - Box

Quick Keys
Quick Keys Case
L-Style USB-A to USB-C Cable
Wireless Dongle
Adapter – USB-A to USB-C
Xencelabs Decal

Warranty Sheet and
Thank-You Card (not shown)

Initial Setup

Xencelabs Quick Keys

Download Drivers
To get the tablet’s full benefits, we strongly recommend you download and install the driver.
The Quick Keys requires driver installation, however, the tablet will only have basic navigation functions without the driver.
Use the link below to access the Xencelabs downloads page for the latest drivers for Windows, Mac, and Linux. xencelabs.com/support/download- drivers/
Install Drivers
After your download is complete, run the driver installer, start the setup wizard, and begin using your new tablet.
Mac users should restart their computer after the software installation is complete for the driver to function correctly.
Find quick answers to the most commonly asked questions by checking our online
FAQ Knowlege Base page: xencelabsassist.freshdesk.com/en/support/solutions

Important Note: For the initial setup only, the installation wizard requires a wired connection to Xencelabs Quick Keys

xencelabs K02 A Quick Key - Device Charging

Quick Keys Features

Xencelabs Quick Keys

Connection Indicator
Solid Blue – Connected
Breathing Blue – Wired Connection
Blinking Blue – Trying to Connect ****

xencelabs K02 A Quick Key - Features

1. Security
Kensington NANO Security Slot
2. USB-C Port
Charge the battery and/or connect to the computer.
3. Dial
Customize the dial with 8 dimmable
LED color ring options.
4. Dial Mode Button
Switch between up to 4 different modes per application (ie. zoom, brush size, etc).
5. Eight Shortcut Keys
5 customizable groups of 8 keys per application for a total of 40 shortcuts.
You can disable sets if they are not needed. For example, group your workflow activities into sets (ie. sketching, coloring, editing).| 6. Set Button
Controls the OLED display and allows you to switch between up to 5 shortcut groups.
7. Connection Indicator
Blinking blue light indicates searching for connection, solid blue light indicates successful wireless connection, and breathing blue light when connected via USB cable.
8. Power Slide Switch
Slide and hold to turn on/off. Adjustable sleep times are in the settings panel.
9. Charging Indicator
A solid green light indicates full charge, a breathing green light indicates charging, and solid amber light indicates the device has a low charge.
10. OLED Display
Displays shortcut key assignments.
---|---

Connect Wirelessly

Xencelabs Quick Keys

You can connect Quick Keys wirelessly with the provided dongle which establishes a wireless connection between the dongle and the tablet.
Additionally, we have provided a USB-A to USB-C adapter should you need it.
For added convenience, the single-provided dongle will connect both Quick Keys addition to a Xenselabs tablet.

xencelabs K02 A Quick Key - Connect Wirelessly

If you have any questions or concerns, please feel free to reach out at: [email protected]

Device Charging

Xencelabs Quick Keys

Charging Indicator
Solid Amber – Low Charge
Breathing Green – Charging
Solid Green – Fully Charged

To charge your Quick Keys connect it to a powered-on computer, powered USB hub, or another USB charger (5mAh required). To use your devices over a wireless connection, make sure they are sufficiently charged.
When fully charged, the Quick Keys will give you up to 52 hours of continuous use. When critically low the LED lights will turn amber, and a breathing green light indicates charging. See driver settings panel for charge status.

xencelabs K02 A Quick Key - Xencelabs Quick Keys