PYLE PT272AUBT Hybrid Amplifier Receiver User Manual

PT272AUBT
Hybrid Amplifier Receiver
Home Theater-Stereo System, Wireless BT Streaming,
MP3/USB/SD Readers, AM/FM Radio, 300 Watt
USER MANUAL

Please read these operating instructions carefully before use. They will acquaint you fully with its features.
This product adopts highly advanced digital techniques, high powered, four- channel outputs to be the media center of your living room. It includes an AM/FM tuner and MP3/Wireless BT input headphone jack. This Pyle Pro hybrid amplifier also has sub-out and pre-outs for a variety of applications.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK. DON’T EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK AND ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY. *
THIS DEVICE IS INTENDED FOR CONTINUOUS OPERATION!
Designs and specications are subject to change without notice.
**

FEATURES

• PRE-Amp with AM/FM Tuner
• CPU management of all functions, remote sensor
• The digital fluorescent output displays all the functions
• Separate gain control of pre-amp and subwoofer
• All the blue lights and blue rings gain control through the LED Dimmer
• AM/FM Quartz synthesized Tuner, auto station seek and store, 50 stations storage, with both manual and automatic tuning
• BT/MP3 Input
• Digital karaoke system
• Overheat, over current protection
• Wireless BT receiver features that make listening to music more convenient
  1. Before you can use a Wireless BT device, it must be paired and connected. Make sure that Wireless BT is activated on your device before you begin the pairing process.
  2. If a username and password are required, search for Wireless BT Network Name: PT272AUBT and enter the necessary login “0000”

PRECAUTIONS

1. Power Source: The unit should be connected to a power supply AC-110/60Hz, and AC-220V/50Hz.

2. Ventilation: The unit should be situated so that its location or position does not interfere with its proper ventilation. Place the unit at least 10cm away from the walls.

3. Water and moisture: The unit should not be used near water-for example, near a swimming pool, in a wet basement, etc.

4. Electric Shock: If a metal object, such as a hairpin or a needle, comes into contact with the inside of this appliance, a dangerous electric shock may result.
   For families with children, never permit children to put anything, especially metal, inside this unit.

5. Enclosure Removal: Do not open the unit as this might result in damage to the circuitry or electrical shock. If a foreign object should get into the unit, contact your dealer or service company.

6. Abnormal Smell: If an abnormal smell or smoke is detected, immediately turn the power OFF and pull out the power cord. Contact your dealer or nearest service station.

How to replace the preset radio stations?

Use the remote control to set the radio stations.
NOTE: The preset radio stations can’t be deleted, BUT CAN BE REPLACED.

Operations Steps:

1. Press TUNER MODE on the remote control
2. Press AM/FM, and select FM
3. Press PRE/NEXT to select the stations you don’t want to keep;
4. Press TUNING again choose the radio stations you want to save
5. Press MEMORY to save the new stations
   In this way, you can replace the preset radio stations.

OPERATION

1. POWER
   Use this button to turn ON or OFF the speakers.
   Caution: Make sure that all connections are properly connected and the main volume is set to a minimum level before turning ON the unit.

2. INPUT SELECT
   Select the input source: CD/DVD, USB, Radio, Wireless BT Streaming

3. MICROPHONE VOLUME: MIC VOL
   Adjust the “ MIC VOL ” knob to increase or decrease the karaoke volume

4. ECHO
   Adjust “ ECHO ” to get a satiable echo effect.

5. TREBLE/BASS
   Turn the TREBLE/BASS knob to adjust the treble/bass tone master channel.

6. MASTER VOLUME
   You can adjust MASTER VOLUME from turning the right volume up, to turning the left volume down.

CONTROLS & FUNCTIONS

FRONT PANEL

1. POWER SWITCH
   Press to power unit ON/OFF

2. SD/MMC CARD READER

3. USB READER

4. PLAY/PAUSE

5. PREV
   Used to select the Previous station which has been kept in the system

6. NEXT
   Used to select the next station which has been kept in the system

7. TUNING <

8. TUNING >

9. AUTOSCAN
   Auto search for radio station

10. AM/FM SELECTOR

11. MUTE

12. A/B SPEAKERS OUTPUT SELECTOR

13. INPUT SELECTOR

14. VOLUME CONTROL

15. SUB.VOL CONTROL

16. TREBLE

17. BASS

18. ECHO

19. MIC. TREBLE

20. MIC. BASS

21. MIC. VOL

22. MIC 2 INPUT

23. MIC 1 INPUT

BACK PANEL

1. TUNER ANT: Connect for AM and FM antennas.

2. AUDIO INPUT JACKS:
   Connect the audio output jacks of DVD/CD AUX to these jacks.

3. A SPEAKER OUTPUT TERMINALS:
   Connect your speaker system to these terminals.

4. B SPEAKER OUTPUT TERMINALS:
   Connect another speaker system (s) to these terminals.

5. COOLING FAN

6. VOLTAGE SELECTOR SWITCH: Slide to select the correct voltage 110V or 220V.

7. POWER CORD: Connect to AC 110V/60Hz and 220V/50Hz outlet.

REMOTE CONTROL

1. AUX/USB Selector

2. CD/DVD Selector

3. TUNER Selector

4. AUTO: Automatically search the single source when power ON

5. MP3/BT Selector

6. AUTO SCAN: AM/FM auto scan selector scans and stores stations automatically. Can store 50 stations

7. MEMORY: After a station has been found you can store the station by pressing the MEMORY button and the screen will display SAVE.

8. ST/MONO: Stereo and mono selector.

9. SPEAKER A selector

10. SPEAKER B selector

11. FM/PAUSE selector

12. AM/PLAY selector

13. NEXT > PREV<
    Next station & Previous selector

14. TUNING > TUNING<
    Adjust the strong signal of the stations

15. A+B SPEAKER selector

16. L/R
    Left/Right balance control

17. VOL- VOL+
    Master volume increase and decrease

18. MUTE selector

Remote Controller Operation

1. The remote controller should be operated within 6 meters and the scope of 30° in front of the receiver.
2. Make sure that there is no big obstacle between the remote controller and machine.
3. The remote sensor should be far away from the light, high amounts of light can affect its performance.

SAFETY INSTRUCTIONS

1. Make sure that all connections are properly connected and the main volume is set to a minimum level before turning ON the unit.
2. When more than one pair of speakers are used, (especially the main speaker output) make sure that the speakers used are of the same wattage and impedance, otherwise, the unit may be damaged under high power or long-term operation.
3. To avoid humming sounds and unwanted noise, make sure that all the wires are properly inserted.
4. For speaker cords, strip off the vinyl coating and twist the wire tip. Push down the pink jack or loosen the screw terminal, before inserting the wire tip, then fasten it and tighten the screw. Be careful not to let the wires stick out of the terminal otherwise this may cause a short circuit when wires of different terminals contact each other.
5. After the unit is turned ON, adjust the main volume to the desired level same with bass and treble volume, etc.

PT272AUBT
Hybrid Amplifier Receiver
Home Theater-Stereo System, Wireless BT Streaming,
MP3/USB/SD Readers, AM/FM Radio, 300 Watt

Features:

• Home Theater Amplifier Receiver System
• Ability to Connect External Devices & Speakers
• Built-in BT for Wireless Music Streaming
• MP3 Digital Audio File Support
• USB Flash & SD Memory Card Readers
• AM/FM Radio with LCD Display
• (2) 1/4’’ Microphone Inputs
• RCA (L/R) Audio Input/Output
• Banana Binding Post Speaker Output Jacks
• Front Panel Button Control Center
• Echo, Bass, Treble, Sub, Mic Volume Adjustable
• Includes Remote Control & Power Cable

Wireless BT Connectivity:

• Instantly Receives Wireless Music Streaming
• Works with all of Your Favorite Devices (iPhone, Android, Smartphone, iPad, Tablet, etc.)
• Wireless BT Version: 3.0
• Wireless BT Network Name: PT272AUBT
• Wireless BT Password Required: ‘0000’ (4 Zeroes)

Technical Specs:

• MAX Power Output: 300 Watt
• 30 Watt x 2 @ 8 Ohm
• 60 Watt x 2 @ 4 Ohm
• Frequency Response: 40-15kHz (+/-2dB)
• T.H.D.: <1%
• Signal-to-Noise Ratio: 76dB
• Input Sensitivity: 400mV Aux, 6mV Mic
• Radio Station Memory: 50 Presets
• Tuner: Quartz Synthesizer
• Maximum USB/SD Card Support Size: Up to 32 GB
• Digital Media File Support: MP3, WMA
• Battery Operated Remote, Requires (2) x ‘AAA’, Not Included
• Power: 110/220V, Switchable
• Dimensions (L x W x H): 19.0’’ x 11.8’’ x 3.2’’ -inches

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2.  this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

VISIT US ONLINE:
Have a question?
Need service or repair?
Want to leave a comment?
PyIeUSA.com/ContactUs
Questions? Issues?
We are here to help!
Phone: (1)718-535-1800
Email:support@pyleusa.com
www.PyleUSA.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>