BOSS Audio Systems 611UAB Multimedia Car Stereo-Complete Features/Owner’s Guide

BOSS Audio Systems 611UAB Multimedia Car Stereo

Specifications

• BRAND : BOSS Audio Systems
• INTERNET SERVICES : Pandora
• PRODUCT DIMENSIONS : 4.5 x 7 x 2 inches
• AUDIO ENCODING : Stereo
• CONNECTIVITY TECHNOLOGY : Bluetooth, Auxiliary, USB, Supported
• OUTPUT WATTAGE : 200 Watts
• CONTROL METHOD : Voice
• NUMBER OF CHANNELS : 4
• AUDIO OUTPUT TYPE : Speakers
• COMPATIBLE DEVICES : Speaker, Smartphone
• ITEM WEIGHT : 1.04 pounds

Introduction

By using this device, be hands-free and make/answer calls with no distraction. The built-in microphone takes up your voice and the speakers of your car allow you to hear the person on the other side. Play and control your Apps and music like Pandora/ Spotify wirelessly. You can also play music through a USB port or with Bluetooth device. Digital media support includes WMA file format and MP3 file format. You can also tune into FM/AM radio stations for up-to-date news/sports/music and more. It is compatible with the audio output from MP3 players and smartphones. You can get 50 watts x 4 Max power from the 611UAB to charge your speakers.

PRECAUTIONS

LITHIUM BATTERY CELL WARNINGS

• Cell leakage may cause damage to the remote control.
• Do not throw cells into as this may cause an explosion.
• Keep battery cells out of reach of children.

TAKE PRECAUTIONS

• To reduce the risk of fire, electric shock, and annoying interference, do not repair yourself. Please refer serving to qualified person.
• Some MP3/WMA files may not be playable.
• Keep lower volumes to concentrate on traffic and road conditions.
• If the battery is disconnected or discharged or changed, the pre-set memory will be erased and must be reprogrammed.
• Installation of unit is better at a horizontal position, or if it is at an angle, it may be not working at its best
• Be sure to lower the volume before switching off the unit or the ignition key. Some MP3/WMA files may not be playable.

INSTALLATION

INSTALLATION PROCESS

First complete the electrical connections and then check for correctness.

INSTALLATION OPENING

Insert the mounting collar into the dashboard and bend the mounting tabs out with a screwdriver. Make sure that lock lever is flush with the mounting Collar (not projecting outward)

This unit can be installed in any dashboard Having an opening as shown above

INSTALLATION(CONT.)

• Only use speakers with 4 ohms impedance.
• Do not attach the control panel to the chassis before wiring is complete.
• The maximum current of the auto antenna is 200mA.

WIRING CONNECTIONS

REMOVAL OF THE MAIN UNIT

1. Remove the metal strap from the main unit.
2. Remove the plastic trim out from the main unit.
3. Insert a bracket key into the left and right side of the main unit and draw the unit out of the mounting sleeve.

CONTROL PANEL BUTTON LOCATIONS

OPERATIONS

1. POWER/SRC
   Press the POWER button to turn on the unit, and long-press it again to turn off the unit. When the unit turn on, short press the POWER/SRC button to switch the unit between RADIO, BT, USB, and CARD, AUX-IN, (if there are USB and SD card inside the unit).
   If there is no USB and SD card, their respective logos will illuminate on the display.

(Button 1 to 6) PRESET MEMORY BUTTONS IN RADIO MODE

To memorize the frequency, press one of the six preset buttons (1-6) hold for more 2″S, the frequency is su<?cess fully stored. Therefore, there are FM1, FM2, FM3, AM1 & AM2, each band can store 6 stations, so total 30 stations can be stored. To recall the pre-set memory station, press one of the pre-set buttons (1-6) plus the BND button for FM1, FM2, and FM3.AM1 & AM2. During USB or SD card mode, press the ‘5/-1O’ button to go backward 10 tracks. Press the’ 6/+1O’ button to jump forward 10 tracks. During USB or SD card mode, long press the ‘5/-1O’ button to go back 1 folder. Long press the ‘6/+1O’ button to go up 1 folder. You can repeat this function depending on the number of folders. This button will have no function if the USB or SD card has no folders.

CLK
Press the CLK button once to display the real time, with time appearing on the display. Press and hold CLK button for more than 2 seconds until the time flashes. You can adjust the HOUR and MINUTE by pressing the >>| button and |<< button respectively and press the CLK button to switch the HOUR and MINUTE.

USB Port / Micro SD Card Slot

OPERATION

In the radio mode, rotate the volume knob to increase or decrees the volume level of the sound output. Press the volume knob, it will be switching the sequence as follows:

At the radio status, press and hold the VOL button to enter the switch state of the US(USA) and EU (EUROPE) frequency, then rotate the VOL knob to select US frequency or EU frequency, after selecting US or EU frequency, the system will switch to the selected frequency 3 seconds later.

FF ( > >| ) &12. FB ( | << )
In the radio mode, long-press the FF (>>|) or FB (|<<) button for more than 2 seconds, the unit will search the next or previous frequency step by step. Short press the FF (>>|) or FB (|<<) button, the automatic search will start, it will search upward or downward for the strong signal radio station within the cuttent band. The auto searching will stop until find a station.

BND/AMS
In radio mode, short press the BND/AMS button repeatedly to select the one of the radio bands: FM 1, FM 2, FM 3, AM1, AM2 in a cycle sequence. When you select a band, the word F1、F2、F3 for FM band, and A1、A2 for AM band will be shown on the LCD display. Press the BND/AMS button for several seconds, the radio searches from the current frequency and check the signal strength until one cycle search is finished. When the 6 strongest stations will be stored into the corresponding present number within current band. Short press the BND/AMS button to scan each present station in each band.

MUTE
Short press the MUTE button to turn MUTE ON/OFF, when it is on, the MUTE will be flash on the LCD and no sound output. When short press again it will be cancelled

AUX-IN JACK

RESET
To reset all parameters to factory default values. Use a subject with a sharp point end to thrush the RESET hole.

BLUETOOTH OPERATIONS

Pair and Connect
Prior to using the Bluetooth device as a handsfree system for a Bluetooth- enabled mobile phone for the first time, you must pair and connect the two devices as follows:

1. In any mode, prior to pairing and connecting, the BT logo flashes in the LCD indicating that no device is connected. To begin pairing, enable BT mode on your mobile phone.
2. When the phone finds the car audio system, the BOSS AUDIO name will be displayed.
3. Choose the BOSS AUDIO from the device list to pair and connect with the car audio system. Upon confirming the BT logo will stop flashing.
4. When pairing is complete, the mobile phone audio will automatically transfer to the car audio system whenever a call is made or received, or when the mobile phone plays music.

Make a Call

• To make a call, dial the call directly from the paired mobile phone.
• Redial Last Dialed Number
• Press and hold the   button on the control panel to redial the last dialed phone number.

Answer a Call

• When the mobile phone is called, the incoming telephone number displays in the LCD. To receive the call, press the button on the control panel.
• To reject the call, press the button on the control panel.

End a Call

To end an active call, press the  button.

Switch Audio Between Car and Phone
During a call, press the VOL knob/button to switch the audio source from the car audio system back to your mobile phone.

Adjust Talk Volume

• During a call, use the VOL knob or VOL + and VOL – buttons to adjust the volume
• Use the MUTE button to mute

Audio Streaming (A2DP)

1. Press the / SRC button to enter BT mode and display media in the
2. When a mobile device is paired, music played through that device will automatically be heard through the car audio system.
3. Press the > >| or | << button to play the next previous song/file on the mobile phone.
4. Press the > || button to pause or resume music

TROUBLESHOOTING

If you suspect something is wrong, immediately switch the power off. Do not use the unit in an abnormal condition, for example, without sound, or with smoke or foul smell, can cause fire or electric shock. Immediately stop using it and call the store where you purchased it. Never try to repair the unit yourself because it is dangerous to do so.

Frequently Asked Questions

• How do I Bluetooth My boss 611UAB?
  pick the BOSS 611UAB from the device list to pair and hook up with the car audio machine. Upon the BT brand will forestall 4. whilst pairing is complete, the mobile phone audio will robotically switch to the automobile audio device every time a call is made or received, or while the cellular smartphone plays tune.

• How do I reset my boss audio system?
  The “input” button and the “reset” button aren’t blanketed in guidance wheel, press the “enter” button to verify the select, press the “reset” button to clean the former select.

• How do I connect my phone to Boss radio?
  Set your Bluetooth phone to find out the BOSS AUDIO three. Your smartphone will find the BOSS AUDIO Your cellphone then asks if you need to pair with it. be given by using urgent sure or ok on the smartphone and confirm with the passkey or PIN=0000 (four zeros). Your phone will verify when pairing is whole.

• Is Boss Audio any good?
  Boss Audio systems constructed a reputation because the go-to emblem for those looking for a notable-sounding stereo device for their car and a super fee/functions and charge/great balance. If that sounds just like the stereo you’d like, do not hesitate to provide BAS a hazard.

• Why did my boss radio stop work?
  The most likely motive for your radio’s surprising demise is a blown fuse. All car radios have at the least one fuse that protects it from strength surges coming from someplace else inside the car. the first factor you should do whilst your radio stops running is take a look at its fuses and replace any which have blown.

https://m.media-amazon.com/images/I/C1-RxRk9CSS.pdf

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>