EASINE S50 Wired Steam Mop User Manual

: June 5, 2024
: EASINE

Table of Contents

EASINE S50 Wired Steam Mop
Important Safety Instructions
Product Composition
Product Operation
Using your steam mop
Maintenance
Common Failure Analysis and Treatment
Troubleshooting
Product Technical Parameters
Read User Manual Online (PDF format)
Download This Manual (PDF format)

EASINE S50 Wired Steam Mop

EASINE- S50 -Wired- Steam -Mop-
PRODUCT

Important Safety Instructions

For household use only
When using your steam-care mop,basic safety precautions should always be followed,including the following:

Read all instructions before using your steam mop.
Please be careful when using the steam mop,the steam emitted from the steam mop is very hot.

TO REDUCE THE RISK OF FIRE,ELECTRIC WARNING: SHOCK OR INJURY.

WARNING

Use the system only or its intended use.
Do not use outdoors.
Do not leave the appliance unattended when plugged in.Always unplug the power cord from the electrical outlet when not in use and before servicing.
Do not allow the appliance to be used by children.Close attention is necessary when used by or near children,pets or plants.
Use only as described in this manual.
Use only the manufacturer’s recommended accessories.
Do not operate the appliance with a damaged plug or cord,or if the unit has been dropped or damaged.To avoid the risk of electric shock, do not disassemble or attempt to repair the appliance on your own. Return the appliance to EASINE after-sale products limited for examination and repair.Incorrect re-assembly or repair can cause a risk of electrical shock or injury to persons when the appliance is used.
To protect against a risk of electric shock.Do not immerse the steam mop into water or any other liquids.
Do not handle plug or steam mop with wet hands or operate the appliance without shoes.
Do not pull or carry by a power cord,use the power cord as a handle,close a door on the power cord,or pull the power cord around sharp edges or corners. Keep power cord away from heated surfaces.
Do not unplug by pulling on power cord.To unplug,grasp the plug not the power cord. Do not use extension cords or outlets with inadequate current carrying capacity.
Do not put any objects into openings.Do not use with any opening that is blocked.
Important Safety Instructions
Do not touch mop head and body when using to avoid burns as temperature is high.
Use only on flat,horizontal surfaces,Do not use on walls,counters or windows.
Do not use on leather,wax polished furniture or floors,synthetic, fabrics,velvet or other delicate,seam sensitive materials.
Do not add cleaning solutions,scented perfumes,oils or any other chemicals to the water used in this appliance as this may damage the unit or make it unsafe for use.If you live in a hard water area,we recommend using distilled water in your steam mop.
When in use, never turn the appliance over or onits side . Never direct steam towards people,animals or plants.
Never leave the steam mop in one spot on any surface for any period of time when micro-fiber pad is attached as this will damage your floors.
Carefully remove the micro-fiber cleaning pad after you have unplugged and allowed the steam mop to cool.
When cleaning the steam mop,unplug the power cord from the electricaloutlet and clean with a dry or damp cloth.Do not pour water or use alcohol,benzene or paint thinner on the unit.
Extreme caution should be excuted when using this appliance to clean stairs.
Never use steam mop without micro-fiber cleaning pad attached.
Keep your work area well lit.
Store steam mop indoors in a cool,dry place.
To avoid circuit overload.do not operate another appliance on the same socket(circuit)as the steam cleaner.
If an extension cord is absolutely necessary,an extension cord rated a minimum of 15A ,3*0.75mm cord should be used.Cords rated for less amperage may overheat.Care should be taken to arrange cord so that it cannot be pulled or tripped over.
Always unplug and allow the steam mop to cool before removing or changing mop heads.

Product Composition

Product layouts

List of accessories

Attention!
Philips of flat head screwdriver can be used. Screwdriver not included.

Product Operation

Assembly instruction

When assembling your steam mop there may be a little water in or around the water tank . This is because we test all our steam mops 100% before you buy them,so you get a high quality EASINE S50 steam mop.

Connect the handle with the pole,then take the screws (M4x30mm) from the included screw bag and install as shown.
Connect the pole with the body, then take the screws (M6x45mm) from the included screw bag and install as shown.
Connect the mop head with the body, then take the screws (M4xl0mm) from the included screw bag and install as shown.

Fill water guide

Attention!

First things first,always make sure the mop is UNPLUGGED from the wall when not in use.
Never fill the mop,attach the mop head,change or remove the microfiber cleaning pad when the mop is plugged into the wall.
To prolong the life of your steam-care steam mop,we recommend using distilled water.
Make sure you only add water to the tank.
Chemicals or cleaning solution may damage the appliance and could be unsafe for you and your family.
Do not add any aromatic chemicals, cleaning solution,disinfectant fluid into water tank.
Turn and remove the knob from the water tank as shown.
Pour water into water tank to the water line.
Insert the knob back to the water to the water tank and turn to lock up.

Using your steam mop

Attention!

When you are using the mop for the first time,it might make longer than the normal 20 seconds to start steaming.
Your steam mop needs water to make steam. Never use your steam mop without water in the tank. Sweep or vacuum your floor before using your steam mop.
Pull and twist the quick release cord holder to unwrap the power cord completely. Plug into electrical outlet.
After plug-in electric,turn on the switch, the button will light red.(” I “means turn on,” O” means turn off)
Selecting your steam setting

  * Press ” I ” button for steam mop to start.The switch will lights red signal.
  * After 30 seconds, wait for the initial steam to come out from the mop, then u can start using.
  * There are 10 different steam options to choose from left to right.Simply roll the roller to adjust the steam.(Left is for maximum steam , right is for minimum steam.)
4. Clean your floors with a forward and backward motion.
5. Press ” O ” off button until red light disappear to stop steam.

Maintenance

Automatic shutdown function

Our steam mop has Automatic Stand By / Shutdown Function,which is helpful to protect your floor against damage by overheat.

When the steam mop stand at nearly upright (angle 70-90 degrees) for 15 seconds, the, until will stand by; Any motion, will let the until work again.
When the until stand by and continue motionless more than 120 seconds, the until will shut off . You need to press the ON / OFF button to resume steaming.

Maintenance skills

When the microfiber cleaning pad gets dirty,please change a new one to continue cleaning with a fresh pad.
When the water tank is empty,the steam mop will stop producing steam.
You can refill the water tank at any time as long as the mop is unplugged from the outlet. Follow the instructions on page

Common Failure Analysis and Treatment

Care of your steam mop

After use and storage

Press the ON / OFF button to switch off the unit after use.
Unplug the cord from the outlet and place the mop into the upright position.
Let the unit coll for 2-3 minutes.
Remove the cleaning pad.
Empty the water tank before storage.Remove the water tank cap and empty the tank over a sink.Replace the water cap.
To store the steam mop hanging up,first remove the head (after it has cooled and the steam has cooled and the steam has been released) then hang on a large hook.

Care of your micro-fiber cleaning pad

. We recommend washing your micro-fiber cleaning pad separately from other fabrics to avoid picking up lint. Only use liquid detergent (no powder detergent) .Do not use any fabric softeners or bleach. Line dry on a low dryer setting.
If there are loose threads on the micro-fiber cleaning pad carefully cut the thread with scissors.Do not pull on them or cut at the base.

Note:
Calcium and mineral deposits can build up and impact the over time. :
To extend the life of your product.We recommend that you use distilled : water or filtration water. !