Cobra 2A Battery Charger User Guide
- June 5, 2024
- Cobra
Table of Contents
Battery Charger 2A
QUICKSTART GUIDE
Connecting Your Charging Cables
- Determine which connection type is needed (Alligator or 0-ring)
- Connect either the alligator clamps or 0-ring terminals to your battery. (First, red to positive, then black to negative).
- Connect the opposite end of your cable to the battery charger main cable
- Plug the battery charger into a suitable electrical outlet
Charging Your Vehicle’s Battery
- Verify your battery’s voltage and type
- Select the desired battery voltage and type on the battery charger by pressing the mode button to cycle through
- Charging has begun when the LED status light begins to blink orange
- When charging is complete (solid green light) you can safely leave the charger connected to maintain a full charge or disconnect and store for future use
Thank you for purchasing the
Cobra Battery Charger 2A
Keep your batteries fully charged year-round with the Cobra Battery Charger
2A. Built-in safety protections allow for extended connections without the
risk of over-charging — simply set it and forget it. Compatible with 6V and a
wide range of 12V batteries.
Count on Cobra for Power When You Need It.
Download the full Battery Charger 2A manual at: cobra.com/manuals Descargue el
manual completo del Cargador de Patella 2A en:
cobra.com/manuals
Cobra and the snake design are registered trademarks of Cobra Electronics
Corporation, USA. Cobra Electronics Corporation” is a trademark of Cobra
Electronics Corporation, USA. Other trademarks and trade names are those of
their respective owners.
Battery Charger 2A Features
A. LED Status Light
B. Battery Type & Voltage
C. Mode Selection Button
D. Warning Indicators
E. Alligator Cables Selection
F. 0-Ring Cables
Display Light Overview
Standby Power Indicator| The unit is on and in standby mode, waiting to begin
charging.
---|---
Bad Battery| There is a possible battery short or the battery will not hold a
charge. Has the battery been checked by a professional?
Reverse Polarity| Battery Charger cables are connected to the battery in
reverse. Reverse the cable connections.
LED| Condition
---|---
No LED| Charger plugged in but not connected to a battery. Please connect
either the alligator or o-ring cables to the desired battery and select the
corresponding battery type on the Battery Charger to begin charging.
Blinking Orange| The battery is charging.
Solid Green| Charging complete.
Blinking Red and Green| Low voltage mode. The battery charger uses a low
voltage mode to charge batteries whose voltage is too low for normal
operation.
NOTE: For detailed operation including low voltage mode, please see the full product manual at cobra.com/manuals
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>