HAYLOU GT9 True Wireless Earbuds User Manual
- June 5, 2024
- Haylou
Table of Contents
HAYLOU GT9 True Wireless Earbuds
overview
What’s in the Box
Bluetooth earbuds, charging case, eartips (2 pairs), user manual, charging cable
Prior to using please peel off sticker covering the pogo pins and top up both earbuds and charging case.
Earbuds Parameters
- Operation range: 10m(open space with no obstacle)
- Battery capacity: 4OmAh(single earbud)
- Charging time: approx. 1.5hr
- Caling time: approx. 3hr
- Standby time: approx. 105hr
- Input: 5V= 100mA
- Battery type: Li-ion
- Bluetooth version: V.5.2
Charging Case Parameters
- Input: 5V= 500mA
- Output: 5V150mA
- Charging time: approx.2.5hr
- Standby time: approx.5 months
- Battery capacity: 31OmAh
- Battery type: Li-ion
Power-on
- takeout earbuds to auto power on.
- keep touching the panel for 1.5s to power on.
Power-off
- pop earbuds back into case to power off.
- keep touching the panel for 4.5s to power off(LED glows solid red for 2s).
lgnore Call
Keep touching the panel for 1s to ignore call.
How to Charge
Put earbuds back into the case to charge, earbuds will auto power off.LED will glow solid red when charging and turn to white for 1 minute once top up.
Auto-connect.
take out either earbud to power on. When LED blinks white slowly(before
that it blinks red and white promptly), search for Haylou GT3 on your
cellphone and tap to connect. Manual connection: when earbuds are turned off,
manually turn on one of the earbuds. wait for the earbuds LED will then blink
white slowly. On your cellphone, search for the earbud and tap to connect.
Auto pairing
Take out both earbuds from the case.On your cellphone, search for Haylou GT3 and tap to connect.lf you fail to build a connection, please pull the earbuds back into the car and repeat the above steps. Once connected, earbuds will auto-reconnect to the last device in connectivity records whenever powering on(Bluetooth faculty needs to be turned on).
Manual
connection: when earbuds are turned off, manually turn on both of them again,
they auto-start to pair with each other(LED will blink red and white
promptly). When they finish pairing(LED on master earbud will blink white
slowly), search on cellphone and tap to connect.
FUNCTIONS
Caveats
- Please charge the product, in case it has not been used over two weeks.
- Please use a certificated charger.
- Do not wear earphones for along term to protect your hearing
- Do not wear earphones in any situations with potential risks as wearing them may reduce your perception to the outside world.
Daily maintenance
Please do not shower with earbuds.Do not wear them in rainy days. Do not leave them in the washing machines or in other extreme situations. Clean them with dry cloth after use in pursuing a longer service life.
Factory Setting
If earbuds do not function well, please refer to the following steps to reset
the factory: put earbuds back into the case to charge themselves, keep
touching both panels for 10s or until LED blinks red and white 3 times. Delete
relative connectivity records on cellphone and re-build connection with
cellphones.
Audio only outputs from single earbud
It’s are the case. Please reset the earbuds, remove the connectivity record on
your cellphone and re-connect the earbuds to your cellphone.
Other problems in charging
LED glows solid white for 1 minute when earbuds are topped up. Carry case will
not charge earbuds if its battery drains. LEDs on carrying case will turn off
once the case is topped up. If you charge it once again, LEDs will not give
any notice, which does not mean the case is not charged.
Aftersales&Support
Warranty Period:
12 months after purchase (please keep your receipt properly)
Free Service:
If any quality defects happen during the warranty period, please take the
receipt and contact with your distributor for aftersales service Following
cases or any damages/defects that are not due to quality issue are not covered
in the warranty.
- Any defects or damages caused by natural disasters, abnormal voltage or other environmental facts.
- Any unauthorized disassembly, modification or change of parts.
- Any damages caused by improper use of the product including soaking, Ccorroding, falling down, squeezing or exposure to abnormal temperature or humidity.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circut different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of theFCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>