Koss C060 Wireless Communication Headset User Manual
- June 5, 2024
- KOSS
Table of Contents
C060 Wireless Communication Headset
C060
In the Box
Controls & Features
Pairing
- For first use, press and hold the power button for 5 seconds or more
- Choose” C060 “to connect
The headset will automatically connect to your device after the initial connection as long as Bluetooth is on.
Touch Controls
LED Light Language
| Power On | Blue light flash x3 | |
|---|---|---|
| Power Off | | Red light flash xl
BT Paring| | Flash
BT Connected| | Flashing every 5s
Low Battery Reminder| | Flashing red light
Charging in Progress| | Red light on
Charging Complete| | Red light off
Anc On| | Blue ANC light on
ANC Off| | Blue ANC light off
Charging
It takes 2 hours to fully charge headphones. While charging, the battery indicator light is white. It flashes blue when charging is complete.
Note: The lifetime of the battery will be significantly reduced if your headphones are left uncharged for a long period of time. We recommend that you recharge your headphone at least once a month.
Product Specifications
Lithium-Ion Batteries:
Model: 652035, 3.7V, 420mAh
Battery Factory: SHENZHEN MEI NI INDUSTRIAL CO., LTD.
Battery Factory Address: F4, NO. 28, Jinfeng Road, Yangmei
Gang Village, Longgang District, Shenzhen|
Use this product in an environment with a temperature between C and 45 C ;
otherwise, it may become damaged.
KOSS Corporation
Model: KOSS CS34OBT QZ
Hereby declares that Bluetooth Headset, Model: KOSS
CS34OBT QZ is in compliance with the essential requirements and other relevant
provisions of directive 2014/53/EU.
KOSS Corporation
Model: KOSS CS34OBT QZ
Bluetooth Version: 5.0
DC input: 5V=250mA
Case Battery Capacity: 420mAh 1.6Wh
Made in China
WARNING
Using earbuds at high volumes for extended periods of time may result in permanent hearing damage. It is advised you keep volume levels moderate to low at all times for your safety. Do not use it while driving a car, cycling, operating machinery, or performing other activities that require hearing surrounding sounds. Earbuds may not work properly under high temperature or high humidity conditions. Do not use any corrosive cleaner/oil to clean the earbuds. If the earbuds come in contact with liquids, quickly wipe away. If submerged in water, do not turn the earbuds on until completely dried. Liquid submersion voids the warranty. Keep the earbuds and packaging out of reach of children.
Battery warning!
Do not disassemble, strike, crush or put the battery into fire.
- Do not expose the battery to conductive materials, liquids, fire, or high temperatures.
- Do not allow metal objects to touch the two poles of the battery.
- Do not continue to use the battery if it has bulges, leaks, discoloration, or odors.
- Do not use the battery after it has been submerged in water.
- If the battery is used improperly, it may explode or leak, causing burns and other personal injuries.
- If the battery leaks, it should be carefully disposed of according to the local laws and regulations concerning battery disposal.
The Directive on Waste Electrical and Electronic Equipment (WEEE), which entered into force as European law on 14/02/2014, resulted in a major change in the treatment of electrical equipment at end-of-life. The purpose of the Directive is, as a first priority, the prevention of WEEE, and in addition, to promote the reuse, recycling, and other forms of recovery of such wastes so as to reduce disposal. The WEEE logo on the product or on its box indication collection for electrical and electronic equipment consists of the crossed-out wheeled bin, as shown below.
FCC WARNING
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions: 1) this device may not cause harmful
interference, and 2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try correct the interference by one or more of
the following measures:
- Reorient the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
IC STATEMENT
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>