aiwa AI1202-BLK-STK Noise Cancelling Earphones Instruction Manual
- June 5, 2024
- Aiwa
Table of Contents
Prodigy Clear Plus Noise Cancelling Earphones Operating Instructions
Includes:
- True wireless earphones
- Charging case
- Charging cable(USB-C cable)
- Small and large eartips (medium fitted)
Bluetooth pairing name AIWA Prodigy Clear Plus
Function Overview
How to use these Earphones:
Power ON:
When the charging case is opened, both earphones will automatically power ON
and pair to each other. Or when the earphones are OFF you can press and hold
both touch buttons for 8 seconds to turn them ON.
Power OFF:
Put earphones back into the charging case and close the lid, they will be
automatically powered OFF. Or you can press and hold the touch button of
either earphone for 8 seconds, both earphones will be turned OFF.
Single Press
Double Press
Press and Hold
Triple Press| Left Earbud
Decrease Volume
Track Skip Back
Voice Assistant
Low Latency On/Off| Right Earbud
Increase Volume
Track Skip Forward
Play/Pause
ANC On/ Ambient
ON Sound Modes Off
---|---|---
Single Use Mode
If only one earbud is used the functions automatically change.
Single Press
Double Press
Press and Hold
Triple Press| Decrease Volume
Increase Volume
Voice Assistant
Low Latency On/Off
---|---
Change mode:
Press the right button 3 times:
Noise Cancelling On > Ambient Mode On > Sound Modes Off > Noise Cancelling On
…
Press the left button 3 times:
Low Latency On > Low Latency Off > Low Latency On …
ANC (Active Noise Cancelling) actively cancels noise around you so that
you can hear your music/movies or calls more clearly with less distraction.
Ambient Mode turns off ANC and instead actively amplifies sound around
you to counter-act the passive noise reduction of the earphones for situations
where you want to hear speech or traffic noise or other ambient sounds.
Clear Calling uses the two microphones to cancel noise pickup in your
microphone channel on calls. Clear calling is always enabled when a call is
made (and can be used with ANC if desired).
Low Latency mode:
Reduces the latency (time delay) inherent in Bluetooth connections to less
than 60mS in the earphones which is imperceptible for most people. Improves
lip-sync and provides the fastest sound feedback for mobile gaming.
Pair the Earphones with your phone/tablet/Bluetooth device.
- Go to ” Bluetooth ” settings on your Bluetooth device.
- Turn the Bluetooth ON, on your device.
- Open the charging case, the LED on the case will light up, The earbuds will automatically turn on and pair with each other. Now they can be paired to your device.
- On your Bluetooth Device, select AIWA Prodigy Clear Plus
Charging the Case:
- The case can be charged by USB (wired) or Qi (wireless).
- The case LED flashes when charging. Flashing amber when case charge is <20% and flashing green when >20%. The LED goes solid green when the case is fully charged.
- For USB charging use the supplied USB A to USB C cable and a standard USB adaptor or socket (5V 1A).
- For Qi charging place the case on a Qi pad so that the back of the case lies flat on the pad and the case is in the middle of the charging area.
- Unplug the cable or remove the case from the Qi pad when the case is fully charged.
Charging the Earphones:
- Place the earphones into the case. Make sure they make good contact with the charging pins.
- Before first use of the earphones please charge them to 100%.
Warning: Only use the provided case never try to charge from another case
or device.
Restore factory settings Open the cover of the charging case, press and
hold the button on the rear of the case for around 8 seconds to clear the
pairing history and restore the factory settings.
Specifications
Model No:
All 202-BLK-STK| Playing time (ANC OFF):
up to 7 hours
---|---
ANC depth:
25+/-2dB| Charging case battery capacity:
35OrnAh
Bluetooth version:
5.0v| Earbud charging time:
around 30 mins
Driver size:
Φ10mm| Fast charging:
5 minutes = 1 hour playtime
Effective range:
up to 15 meters| Case charging:
USB: Around 2 hours Qi: Around 2.5 hours
Earbud battery capacity:
40mAh| Charges in case:
3
Playing time (ANCON):
up to 4.5 hours| Charging port
Type-C USB
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth® SIG, Inc. CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
WARNING Do not dispose of the unit in fire or water. >Never attempt to disassemble and reassemble. Waste electrical products should not be disposed of with household waste >.please recycle where facilities exist. >Check with your local authority for recycling advice > Keep your device and all accessories out of the reach of children and animals, Small parts may cause choking or serious injury if swallowed. Avoid exposing your device to very cold or very hot temperatures ( below O’C or above 45C. , Extreme temperatures can cause deforming of the device and reduce the charging capacity and life of your device. Do not allow your device to get wet-liquids can cause serious damage, Do not handle your device with wet hands.
This product shall be supplied by a power source not exceeding PS1 only. >This Bluetooth earpiece shall be charged by the supplied charging unit only. CAUTION > The batteries in this product are not replaceable. ) During use, storage, or transportation the battery should not be subjected to extremely low temperatures or low air pressure at high altitude. ) If the battery is exposed to extremely high temperatures it could result in an explosion or the leaking of flammable liquid or gas. ) Please take care when disposing of the unit; disposal in a fire, oven, mechanically crushing, or cutting machine could cause an explosion.
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirements.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>