WEIDA A8900 Bluetooth Wireless Stereo Headset User Guide

A8900 Bluetooth Wireless Stereo Headset
User Guide

Thank you! Thank you for choosing our Bluetooth Wireless Stereo Headset. Please read this guide carefully before use.
Check the Items

1. Headset body
2. USB charge cable
3. User Guide

Product Specification

*Note: Due to different pairing devices and using environments, the working hours of the headset are different.

Product Overview

1. : Long press duce seconds is power on or off, short press during using is to Play or Pause Short press to answer the call; Long press to refuse the call: Press 2 times continuous to redial.
2. :In Bluetooth mode, Short press: Previous, Long press: volume.
3. : Bluetooth mode, Short press: Next, Long press: volume+ ;
4. Short press /V- and /V+ at the same time to switch functions: Bluetooth / TF Card/radio

Charge the Headset

This headset has an internal rechargeable battery. The battery must be fully charged before you can start to use the headset.

1.  Connect one end of the USB cable to the charger or the USB interface of the computer and the other end to the charging interface of the headset. The red light on charging.Red light off charged
2. Charge time: about 2.0hours

Pair the Headset with a Bluetooth Cell Phone or a Computer

First, please make sure the Bluetooth function is available for the cell phone (or the Computer). Specific pairing procedures shall be different depending on different cell phones (or Computers). For detailed information, please read the Cell Phone (or the Computer) User Guide concerning the pairing guidance of Bluetooth devices.
The pairing procedures are as follows:

1. Keep the distance between the cell phone (or the computer) and the headset within I m.
2. Make the headset enter into the pairing mode(please refer to the “pairing mode”)
3. Active the Bluetooth function of the cell phone(or the computer), to search for the Bluetooth device after finishing the search, select” BT ” in the device list displayed.
4. Press the “yes” or “enter key to confirm the stressful pairing in accordance with the hint of the cell phone(or the computer).
5. The blue light will continuously flash 2 times every 5 seconds after Bluetooth connects successfully.
6. When you open your mobile phone with a music player, you can listen to music, this product can control the next song and the previous song by Bluetooth, play and pause, answer the phone and redial, etc.

LED light indicator

1. In Bluetooth mode, the blue light will be twinkle flash, when the headphone matches the phone successfully, the blue light will slow flashing when connection successfully.
2. In charging mode, the red light is on steadily when charging, when it is fully charged, the red light will be oft

FAQ

• Why is the red light off at the beginning of the charge?
  —Please make sure the came ction between the charging device and the headset is good. if the headset is not used for a long time, the red light will be on after charging for about 30 minutes.
  How long is the operational distance between the headset and the pairing device?
  —According to the Bluetooth standard, the maximum controllable distance of a Class-type headset is 10m, but it is different due to specific environments and different pairing devices.

• Why does the cell phone fail to find the connection with the headset?
  —If either of the headset and the cell phone is not in pairing mode, the phone could not find the connection with the headset. Therefore, please make sure the headset and the cell is in pairing mode.

• Why does no sound come out from the headset?
  —Please confirm whether the headset is in a working state or not.
  —Please check whether the volume of the headset is appropriate or not, and press the “V ” key for adjustment.
  —Please check whether the connection between the headset and the cell phone is normal or not.
  —Please make sure that the headset is within the controllable range or not

• Why is the calling effect of the headset not good?
  —Please check the local signal intensity of the cell phone.
  —Please check whether the headset is within the controllable range or not.

• Why cannot remote control be realized for the headset during music playing?

• – his function requires the device paired with the headset supporting the Avrcp protocol.

• Why the headset could not be switched on? —Please check if the battery is sufficient or not.

Dos and Don’ts

• Keep the product dry. Do not store it in damp areas.
• Do not expose the product to the sun or high temperature.
• Do not attempt to open the product, especially operated by a non-professional person.
• Do not make the product fall down, shake the product violently, or strike the product with hard objects.
• Do not use harsh chemicals or cleaner to clean the headset.
• Do not use something sharp to scratch the surface of the product.
• Do not continuously charge the headset for over 10 hours to avoid affecting the service life.

FCC Caution

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
  The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>