iFORWAY HS2000 Battery Replaceable Power Station User Manual

iFORWAY HS2000 Battery Replaceable Power Station User Manual

Welcome

Thank you for purchasing this great energy storage series products. We strive to create innovative products with extreme safety and excellent performance for you, and we will try our best to make the products simple and easy to use.But in view of the particularity of battery products, Please read the manual carefully before using the product to ensure a safe and satisfactory operation.

CAUTION

1. Please keep dry and stay away from fire.
2. Please do not disassemble, puncture or strongly impact the product.
3. Please recycle and dispose of the product in accordance with local laws and regulations.
4. Please keep safe when dispose of the product.
5. Children and the disabled please use this product with guardian.

Safety Instructions and Maintenance

1. Please read the manual carefully before using the product.
2. To reduce the risk of injury,please pay more attention when using this product near children.
3. Do not put fingers, palms or any part of your body into the product.
4. Use the unrecommended accessories may cause fire, electric shock or personal injury.
5. Do not use damaged or modified battery packs or devices.
6. Do not use this product with damaged wires, plugs or output cables.
7. When the product needs repair or maintenance, do not disassemble the power supply by yourself. Please hand the power station to a qualified service provider. Wrong disassembly method may cause the risk of fire or electric shock.
8. When the product fails, in order to reduce the risk of electric shock, please remove the power station from the socket before performing any guided maintenance operations.
9. Please charge the product in a well-ventilated place, do not obstruct the air circulation.
10. Under some extremely harsh conditions, liquid may be ejected from the battery. Avoid contact with batteries and liquids. If contacted please rinse with plenty of water.If the liquid comes into contact with the eyes, please seek other medical help.
11. Please do not expose the product to fire or excessive heat.
12. Only repairs by qualified service personnel.
13. The 110V version portable power station only supports 100 120V (50Hz/60Hz) AC charging. The 220V version portable power station only supports 220-240V (50Hz/60Hz) AC charging, please do not exceed the specified input AC voltage. Otherwise it may cause product failure, We will not be responsible for providing free maintenance services. Please keep the safety instructions properly.

Introduction

The Portable Power Station is an innovative energy storage power station, our creative design separates the battery and the host.You can choose the batteries with different capacities or types according to your needs and preferences. You can also store the host and battery separately according to your actual situation.If necessary, you can buy a lot of batteries, together with outdoor solar panels (need to be purchased separately) and charging base (need to be purchased separately) to provide you with unlimited battery life and create your own private “perpetual power empire”. More possibilities are waiting for you to discover!

1. Battery compartment cover
2. DC ON/OFF Switch
3. DC Output port
4. Car Cigarette Lighter Socket
5. DC Input port
6. AC Input port
7. Solar Panel Input Port
8. AC ON/OFF Switch
9. AC Output Port
10. Battery compartment Lock
11. LCD Display
12. USB ON/OFF Switch
13. QC3.0 USB-A Output Port x4
14. PD100W USB-C Output Port x2
15. Mian Power Button
16. Expansion Component Mounting Hole x4
17. Handle
18. Cooling Hole
19. Bottom Mounting Hole

Specification

2000Wh (3.7V/527,800mAh)
Battery Type:| Lithium-ion Cell
Input:| AC| 1200W Max.| 100-120V~,60Hz| Option
220-240V~,50Hz
Anderson| 12-60V/10A Max.(600W Max.) Built-in MPPT Solar Charge Controller
DC 5521| 12-60V/7A Max.(420W Max.)
Inverter Waveform:| Pure Sine Wave
AC Output:| Rated Power: 2000W Peak Power: 4000W| 100-120V~,60Hz| Option
220-240V~,50Hz
DC Output:| 2x USB-C| Power Delivery 100W ( 5V/9V/12V/15V/20V, 5A Max.) per port
4x USB-A| QC3.0 ( 5V/3A, 9V/2A,12V/2A) per port Max.18W
1x Car Socket| 13.6V/8A, 108.8W Max.| Total Share 8A Max.
2x DC5521| 13.6V/8A, 108.8W Max.

Install the battery

Because the Portable Power Station adopts the design of separating the battery from the host, you need to install the battery into the host before you start using HS2000. If the battery is already installed in the host, please ignore this step.

1. Open the front lock of the host，Flip up the battery compartment cover.
2. Lift the battery with both hands and install it in the battery compartment while keeping the vertical direction. No need to choose the direction, just install it slowly.
3. Close the battery compartment cover and buckle the lock to complete the battery installation. The Portable Power Station will turn on automatically after inserting the battery.
   

Solar Panel series/parallel charging

The Portable Power Station support Solar Panel charging Max 600W. You can purchase multiple solar panels and dedicated cable accessories matching the Portable Power Station to achieve a high-power solar fast charging experience.

CAUTION：
The maximum voltage of solar panels that Portable Power Station can support is 60V, and the maximum current is 10A.

Attention:

• Single Solar Panel（<60V） can be used to charge Portable Power Station directly by plugging in
• Each input connector of the serial input Anderson cable must be connected to a matching solar panel before it can be used normally.

How to charge

• Please charge the battery or install a fully charged battery before using the product.
• Please fully charge the battery before long-term storage.Please check the battery power level every 3 months and recharge it again.
• There have 3 input ports on the Portable Power Station: 1 AC Input Port,1 Anderson solar panel charging port and 1* DC5521 port.

You can use a variety of charging methods to charge the Portable Power Station through these three Input Port.

1. Super fast charging: AC Input Port (AC power supply can be used to charge Portable Power Station with a maximum power of 1200W through the AC charging port.).
2. Solar fast charging: Anderson Input Port.
3. Car charging: DC5521 Port.
   

How to charge backup battery

In addition to using the Portable Power Station host to charge the battery, we can also use the specially designed MPPT charging module (sold separately) to charge the battery independently. Long press the battery power button for 5 seconds, the battery is turned on and the remaining battery power can be checked.

1. Use a dedicated charging cable to connect the battery to the MPPT charging module.
2. Connected the input port of the MPPT charging module to the solar panel or the car cigarette lighter.（Support two charging input methods: solar panel and car charging, and switch to solar panel input charging priority when input at the same time）
3. The power level indicator corresponding to the battery capacity flashes when charging. After fully charged,all 4 indicators are on.
4. When the battery is turned on, the power indicator will always on. Please long press the battery power button to turn off When storing the battery.
   

LCD Display

Battery Information indication| a| | Battery Power Level %| d| | Battery failure prompt
---|---|---|---|---|---|---
b| | Battery Power Level| e| | Battery high/low temperature indication
c| | Battery lock protection| | |
Input indication| k| | AC Input| i| | DC Input
j| | Solar Panel Input| s| | Current Input power indication
Output indication| o| | AC Output| q| | DC/ Car Outlet Output
p| | USB-A/USB-C Output| r| | Current Output power indication
Remaining time indication| l| | Remaining discharge/ full charge time indicator| l| M| Minutes
l| H| Hours
Protection indication| f| | System failure indication| m| | Overload protection indication
g| | Over temperature indication| n| | Over temperature protection indication
h| | Low temperature indication| | |

How to use the AC output function

Under the condition that the total output power does not exceed 2000W, The Portable Power Station can supply up to 8 AC electrical appliances for simultaneous use. (Different Country version,the numbers of AC output port is also different. U.S. and Japan version have 8 AC output ports,U.K. and Universal version have 6 AC output ports, EU version have 5 AC output ports）.

1. After ensuring that the battery has been installed, long press the main power switch for 3S to turn on.The main power indicator and the screen lights up, enters the standby state.
2. Plug in AC appliances.
3. Click the AC on/off switch to turn on the AC output function. The product starts to supply power to external AC appliances.
4. Click the AC power on/off switch to turn off the AC output.
5. When not using the product for a long time，please long press the main power switch for 3S to turn off to save power.
   

How to use USB output

1. After ensuring that the battery has been installed,long press the main power switch for 3S to turn on.The main power indicator and the screen lights up, enters the standby state.
2. Click the USB on/off switch to turn on the USB function.
3. Plug in the USB device and start to use.
   

How to use DC output

1. After ensuring that the battery has been installed,long press the main power switch for 3S to turn on.The main power indicator and the screen lights up, enters the standby state.
2. Plug in the DC device.
3. Click the DC on/off switch to turn on the DC function.
4. After use, Click the DC on/off switch to turn off the DC output.
5. When not using the product for a long time，please long press the main power switch for 3S to turn off to save power.
   

How to use back up UPS function

1. Ensuring that the battery has been installed.
2. Plug in the AC input to power the Portable Power Station. The product automatically turns on and enters the charging mode.
3. Plug in the AC devices.
4. Click the AC on/off switch to turn on the AC output function. The AC electrical appliances enter the backup UPS mode.
5. When the external AC power is cut off, The Portable Power Station continues to provide AC power to power consumers.

Attention:

• Ensure that the AC input terminal is connected to the ground wire stably and normally.
• Ensure to use the backup UPS function normally,the power of AC electrical appliances must be less than 1300W-1500W. If it is more than 1300W 1500W, for safety considering,The Portable Power Station automatically disconnects the external AC input and uses its own battery to provide AC power.
  
  

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>