LavLap 18389 Electric Breast Pump with 3 Phase Pumping Instruction Manual

LavLap 18389 Electric Breast Pump with 3 Phase Pumping

Luvlap Electric Breast Pump has a unique design that enables you to keep a more comfortable posture, The soft massage protection pad design in it provides a soft and warm feeling, and may stimulate a baby’s sucking action, enabling the milk to outflow silently, comfortably, tenderly, and rapidly. The breast pump is compact and exquisite, ec1sy to assemble. Each part is easy to wash in a dish-washing machine all free from· SPA According to the baby.·care exper.ts, breast milk1s the best nutritional food for babies under one year. After 6 months of the baby’s birth, breastfeeding c.an be a concern. used and gradually you may wean the baby with supplements (any food. Breast milk is. perfect for the repid1y,1irement of the baby as the antibody included will provide protection to the baby, again:t infection and irritability. A breast pump can assist you to extend the period of breastfeeding. you may express and store the milk. Even if you are not able to breastfeed the baby by yourself, they may have your milk through the pump. 0n account of the small and exquisite structure of the breast pump, it can be concealed for expression Therefore, you may carry it with you and express it in your own good I time, providing milk for your baby.

Equipment Schematic Diagram

1. On/Off Key
2. Mode Conversion Key
3. Express Weakening Key
4. Express Enhancement Key

Contents Description

1. Dust Cap
2. Massage Cushion
3. Breast Pump Body
4. Silicone Diaphragm
5. Cover
6. Silicon Tube
7. Duckbill Valve
8. Milk Container
9. Extra Feeding bottle with teat and cap
10. Electrical Unit
11. power Adapter
12. Handle + Manual Diaphram
13. Teat, ring, and cap

Preparation for Use and Assembly

• Before first use, clean and sterilize all parts of the breast pump After each use, all parts need cleaning and sterilization needs to be done before each use
• NOTE : See Section cleaning and Sterlizilng

Luvlap Electric Breast Pump Assembly

NOTE

• Make sure you have cleaned and s te realized all parts of the breast pump Please wash your hands thoroughly before touching cleaned parts. Be Careful as the cleaned parts may still every ho t Please sterilize all parts rest pump and thoroughly wash your hands be fo reassembling.

HINT

• You may find wet parts of breast pump are easier to assemble

Installation Diagram

• Insert the duckbill valve into the pump body from below and push it to the greatest extent

• Screw the pump body onto the bottle until it Is completely fixed

• Place the silicone diaphragm into the pump body from above make sure fits securely around press down with your fingers to ensure a perfect seal

• Insert the adapter into the wall, socket and Insert the of her end into the motor unit

FAQ Solutions

Lack of suction

• Examine whether parts of the breast pump are correctly assembled and the duckbill valve is in breakage to make sure the silicone diaphragm and petal massage pad firmly fit the pump body to achieve the ideal sealing condition. NOTE: Never rub while washing

Unable to Express Milk

• Make sure that the suction is sufficient and the assembling of the breast pump is correct. Relax and retry it, milk will be expressed after repeated trials. Please refer to the hints given for SUccessful suction in Section 6, Tips for Successful Milk Expressing

Experiencing Pain during Use

• The possible cause is the overexertion of suction. You do not need all the suction produced by the breast pump. Underdrive with red light can be used for massage stimulation. You may then convert it to express mode. Also, you may consult with your healthcare professional or breastfeeding experts.

Using Breast Pump

When to Express Milk

It is recommended (except advised otherwise suggestions. by your professional/breastfeeding advisor) to wait until your milk supply and feeding schedule are established (normally at least after 2 to 4 weeks of giving birth).

Exceptions

• If you are expressing milk for your baby to be given in hospital.
• if your breasts are engorged (painful or swollen), you can express a small amount of milk before or between feeds to ease the pain and also help your baby latch on more easily.
• if you have sore or cracked nipples, you may wish to express your milk until they are healed.
• if you are separated from your baby and wish to continue to breastfeed when you are reunited, you should express your milk regularly to stimulate milk supply

Tips for Successful Milk Expressing

Choose the best period of a day to express milk, e.g. in the morning with abundant milk, before or after the first expression. for baby, or the baby may not drink the milk from yours. if you have work, you may express milk when resting during work breaks. Practice·s are required to use a breast pump; maybe, you need to try several times for success. Lucki!y, Luvlap Electric Breast Pump is easy toassemble and you can use it skillfully to express milk. Familiarise yourself wit_h the breast pump and its. operation procedure before you use it for the first time. Choose a time when you are not in a rush .and will not be interrupted. A photograph of your baby can Help encourage the “let-down reflex Warmth can also help: try to, express after a bath or sh0wer; or place a warm cloth .on the breast for a few minutes before you start expressing. You may find·it .easier to express while }/Ollr baby is feeding from the other breast, or immediately after a feed. If expressing becomes painful, stop and consult your breastfeeding advisor or healthcare professional.

Operating Instructions

• Press the OiVOff Key (Massa91n9 MQd.e starts auto) @ Press the Mode Switching. Key ( Massaging/ Deep Expressing MQd.e)
• Press the Mode Switching Key for a while to enter Mixed Mode (Massaging + Expressing). Change the level through the (±) 0 key. Massaging Mode (9 gears)
• Bionics Mode (9, gears)
• Deep Expressing Mode (9 gears)
• Press@ or e key, LCD Screen will show it: gear present
• The default working time of this automatically “W ff reast pump is 30 minutes. After then, it will ” LFC er O . (It will rem b powering, off.)  em er your expressing habit before
• The milk in the bottle car:in0t be too full loci exceed the duckbill lalve.

How to Use

1. wash your hands thoroughly and make sure your breasts are clean. Relax in a comfortable chair. (You may wish to use cushions to support your back.) Make sure you have a glass of water nearby.

2. Press the pump body against your breast. Make sure that your nipple is centered so that the massage cushion creates an airtight seal

3.  Press the On/Off.button; the breast pump will automatically start-up in Massage Mode and you can change the strength of the massage through the key and When the breast milk flows, you can press the mode change button from express to massage, and choose what’s suitable for you.
   NOTE: You don’t need to choose the Max Mode for expressing, just choose the most comfortable mode for you.

4. When you have finished expressing, switch off the breast pump and carefully remove the pump body from your breast,

5. Unscrew the bottle from the pump body to make it ready for feeding/storage. Clean the other used parts of the breast pump according to the instructions in Section 9, “Cleaning and Sterilizing”.

6. Unplug the motor

7. Cleaning and Sterilizing Clean and sterilize all the other parts of the breast pump before first use. Also, clean these parts after each subsequent use and sterilize them before each subsequent use. Disassemble it completely. Also, remove the white valve. Be careful when you remove the duckbill valve and when you clean it. If it gets damaged, your breast pump does not function properly. To remove the duckbill valve, gently pull at the ribbed cab on the side of the valve. Clean all parts in hot water with some mild washing liquid and then rinse  thoroughly.

8. To dean the valve, rub it gently between your fingers in warm water with some washing liquid. Do not insert objects into the valve, as this may cause damage.Sterilize the cleaned parts of the breast pump in a sterilizing pan or boil those parts for 5 minutes.

Breast Milk Storage and Heating

Breast Milk Storage

After completing the suction of breast milk, fasten down the storage cap or seal the reservoir bag, which must immediately be put into cold storage or refrigerator. The cold storage will hold for 48 hours and the refrigerator for 3 months.

Heating Breast Milk

You can heat it with the help of a baby bottle warmer or in a bowl of warm water. Do not use a microwave oven or hot water; thereby, avoid the loss of nutrients. The heated breastmilk is used to feed your baby.

The Do’s and Don’ts

1. If you want to freeze breast milk, do not fill up the bottle or the bag; 3/4 may be enough in order to leave space for ice expansion. Never store the breast milk on the door side of a fridge.
2. To preserve tHe nutrients of breast milk, put the frozen milk into a cold storage chamber to unfreeze the previo.us night. Use flowing warm water to warm the bottle or the bag. Gently shake the bottle or the bag, making·separate fat to mix in the milk uniformly.
3. Never put the frozen breast milk into the microwave oven or boiling water to avoid nutrition loss and also avoid scalding the baby.
4. The unfrozen breast milk cannot be frozen again. Never mix the fresh breast milk and unfrozen milk together.

ATTENTION AND CAUTION

1. The product belongs to personal exclusive goods. It is only intended for repeated use by a single user to avoid health complications if any.
2. While taking down or connecting parts, care should be taken, and using too much strength should be avoided so as to not cause damage.
3. Never put it under the blazing sun.
4. Put it out of the reach of children.
5. Place the massage:.cushion into the funnel-shield section of the pump body Push in
   the inner part of the massage cushion as far as possible and make sure·that it is perfectly sealed all around the rim of the·pump. Press in between the petals to remove any appeal(. install the power adapter into the the-pump body and then you are ready.to use the breast pump.

Manual Breast Pump Assembly

1. Insert the silicone diaphragm into the Into-the Brem pump body from the upper side and then press t e silicone diaphragm down with your fingers for the best seeing. Make sure that the silicone diaphragm, fits the from breast pump body on all sides.
2. Hock the hole on the manual handle on the end of the breast pump body to fix the manual handle on the body breast pump. Push the manual handle on the breast pump, body until the right  position

1-year warranty card

• Date of Purchase
• Bill Number
• Retailer’s Signature
• Retailer’s Stamp

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>