ASUS Vudu VAC105 Wireless Kit User Manual

ASUS Vudu VAC105 Wireless Kit

FCC Warning Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following 2 conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference, including interference that may cause undesired operation.

This device has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the installation instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the outlet into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Prohibition of Co-Location
This device and its antenna(s) must not be co-located or used in conjunction with any other antenna or transmitter.

Safety Information
To maintain compliance with FCC’s RF exposure guidelines, this equipment should be installed and operated with a minimum of 20 cm between the radiator and your body. Use only the supplied antenna.

What’s Included

INSTALLATION

HOME NETWORK

1. Locate one of the two included Ethernet cables. Connect one end to the wireless adapter marked HOME NETWORK 1 Connect the other end to your home network router or modem.
2. Locate the included AC to DC power cable. Insert one end into the DC-IN socket of HOME NETWORK 1. Plug the other end into a wall outlet.
3. The LED indicators for Power and Ethernet on HOME NETWORK 1 will light up.

VUDU BOX

1. Locate the other of the two included Ethernet cables. Connect one end to the wireless adapter marked vuDu BOx 2. Connect the other end to your VUDU box.
2. Locate the included USB to DC power cable. Insert one end into the DC-IN socket of VUDU BOX 2. Connect the other end to one of the USB ports on the VUDU box—on the back or left side.
3. The LED indicators for Power and Ethernet on VUDU BOX 2 will light up.

The LED indicators for Power and Ethernet on VUDU BOX 2 will light up and, after a few seconds, the LED indicator for Wireless will start blinking. The wireless adapters have been set up successfully.
Going forward, all three LED indicators on both wireless adapters should be illuminated. When the LED indicators for Wireless and Ethernet start to blink, data is transmitted. Should you have any questions or problems, please refer to the Wireless Kit Instructions at www.vudu.com/vudu_documentation.html or call Customer Care at 1-888-554-8838 (VUDU).

Designed exclusively for use with the VUDU product. ©2008 VUDU, Inc. All Rights Reserved.

Download PDF:ASUS Vudu VAC105 Wireless Kit User Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>