Noizzy Box XS-Prime Bluetooth Speaker User Manual

Table of Contents

Noizzy -Box XS-Prime- Bluetooth
-Speaker- PRODUCT

Before using the speaker, please read our specs clearly and keep it for future reference

Stay away from hot, sharp items and direct sunlight.
Stay away from open fire
Do not insert any metal objects, avoid short circuits.
Don’t repair the product by yourself, please contact the authorized manufacturer to repair it.
Avoid rain, spray, and other liquids.
If the product is overheated, damaged or falling into the liquid, stop using it.
Use the product according to local standards and regulations

Built-in battery care

Product built-in rechargeable battery. the new battery only needs 2-3 hours for the first time to complete the darge and discharge cydles. Do not make the battery fully charged, because overcharging will shorten the life of cycle of the speakers
If you do not use it, power might lost a litte.
Products are płaced in hot or cold places, which will shorten the lfe of the product.

Charger care:

Please uses the standard 5V DC adapter to charge. Use of any other type may damage the product.
Charging according to instructions.
IMPORTANT: Please refer to the description af the user’s manual of the charge status indicator, Some speaxers can not be used when charging.

Accessories

Integrated battery charging:
This Bluetooth speaker is equipped with an integrated rechargeable ithium battery

Insert the charging cable DC 5V, and connect the US8 to the computer or AC DC adapter. LED indicator sght tum red means speaker is in charge.
When the speaker is fully charged, the red indicator will turn off. Pair of Noizzy Box Retro XS Prime Bluetooth speakers for mobile phones or other devices Active Bluetooth speaker pairing mode. The speaker in the shutdown mode, long-press the key for 3 seconds, the speaker begins to make a pairing. Boot into the paired connection open the speaker, if the speaker was not previously connected with the phone or other Bluetooth devices, it autormaticaly enters to wat for pairing; if the speaker and other Blietooth devices are connected before, when starting up, it wil automatically connect the last connected device.

Tips:
Make sure the Bluetooth speaker is in the boot mode and start activoting the pairing.

Tun on your phone and activate the Bluetooth function.
Search for Bluetooth devices, H8 will appear.
Connect Nolzzy 3cx Retro X5 Prime, If you to pass the password, you can enter “0000. then Nolzzy Bax Retro XS Prime will connect to your phone to start using.

Bluetooth function use :

Volume adjust
Volume dial
Next
Play/Pause Mode
Previcus
Bluetooth indicate light
The passive unit
AUX Audio port
USB flash disk
Charging port
TF card read
Tum on/off (Pic 4), long press 4 seconds. Bluetooth indicates lightPic 6) ficker and into Bluetooth matth mocde, tun off long press4 seconds too PMay/Pause: short press will alternate play and pause. The double press will change mode When receive calling, short press to answer call, double press will refuse the call Double press will call the latest ceiling person when the speaker on narmal model
Previous music(Pic 5) short press
Next music{Pic 3) short press
Volume adjust(PiE 1) rotate can adjust volume