Shelly 16A 1 Smart Wi-Fi Relay Instruction Manual
- June 5, 2024
- Shelly
Table of Contents
16A 1 Smart Wi-Fi Relay
Instruction Manual
Legend
- N-Neutral input (Zero)/(+)
- L-Line input (110-240V)/(-)
- 0-Output
- I – Input
- Sw- Switch (input) controlling O
The WiFi Relay Switch Shelly@ 1 may control 1 electrical cir cut up to 3.5 kW. It is intended to be mounted into a standard in-wall console, behind power sockets and light switches, or in other places with limited space. Shelly may work as a stand alone Device or as an accessory to another home automation controller.
- Purpose of control: Operating
- Construction of control: Independently mounted
- Type 1.B Action
- Pollution Degree 2
- Impulse Voltage: 4000 V
- Indication of proper terminal connection
Specification
- Power supply – 110-240V ±10% 50/60Hz AC, 24-60V DC, 12V DC
- Max load-164A/240V
- Complies with EU standards – RE Directive 2014/53/EU, LVD 2014/35/EU, EMC 2004/108/WE, ROHS2 2011/65/UE
- Working temperature – -40°C up to 40C
- Radio signal power – 1mW
- Radio protocol – WiFi 802.11 b/g/n
- Frequency 2400 – 2500 MHz
- Operational range (depending on local construction) up to 50 m outdoors, up to 30 m indoors
- Dimensions (HxWL) -41 x 36x 17 mm
- Electrical consumption <1 W
Technical Information
- Control through WiFi from a mobile phone, PC, automation system, or any other Device supporting HTTP and/or UDP protocol
- Microprocessor management
- Controlled elements: 1 electrical circuits/appliances
- Controlling elements: 1 relays
- Shelly may be controlled by an external button/switch
CAUTION! Danger of electrocution. Mounting the Device to the power grid
has to be performed with caution
CAUTION! Do not allow children to play with the button/switch connected
to the Device. Keep the Devices for remote control of Shelly (mobile phones,
tablets, PCs) away from children.
Introduction to Shelly
Shelly@ is a family of innovative Devices, which allow remote control of
electric appliances through mobile phone, PC, or home automation systems.
Shelly@ uses WiFi to connect to the devices controlling it. They can be on the
same WiFi net work or they can use remote access (through the Internet).
Shelly@ may work standalone, without being managed by a home automation
controller, in the local WiFi network, as well as through a cloud service,
from everywhere the User has Internet access
Shelly@ has an integrated web server, through which the User may adjust,
control and monitor the Device. Shelly@ has two WiFi modes – access Point (AP)
and Client mode (CM), To operate in Client Mode, a WiFi router must be located
within the range of the Device. Shelly@ devices can communicate directly with
other WiFi devices through HTTP protocol An API can be provided by the
Manufacturer Shelly@ devices may be available for monitoring and control even
if the User is outside the range of the local WiFi network, as long as the
WiFi router is connected to the Internet The cloud function could be used,
which is activated through the web server of the Device or through the
settings in the Shelly Cloud mobile application
The User can register and access Shelly Cloud, using either Android or iOS
mobile applications, or any internet browser and the website:
https://my.Shelly.cloud/
Installation Instructions
CAUTION! Danger of electrocution. The mounting/instal lation of the
Device should be done by a qualified person (electrician).
CAUTION! Danger of electrocution. Even when the device is turned off, it
is possible to have voltage across its clamps Every change in the connection
of the clamps has to be done after ensuring all local power is powered
off/disconnected.
CAUTION! Do not connect the Device to appliances exceeding the given max
load!
CAUTION! Connect the Device only in the way shown in these instructions.
Any other method could cause damage and/or injury.
CAUTION! Before beginning the installation please read the accompanying
documentation carefully and completely Failure to follow recommended
procedures could lead to malfunction, danger to your life, or violation of the
law. Allterco Robotics is not responsible for any loss or damage in case of
incorrect installation or operation of this Device.
CAUTION! Use the Device only with the power grid and appliances that
comply with all applicable regulations. short circuit in the power grid or
any appliance connected to the Device may damage the Device
RECOMMENDATION! The Device may be connected to and may control electric
circuits and appliances only if they comply with the respective standards and
safety norms
RECOMMENDATION! The Device may be connected with solid single-core cables
with increased heat resistance to in solution not less than PVC T105C.
Declaration of conformity
Hereby, Allterco Robotics EOOD declares that the radio equipment type Shelly
1 is in compliance with Directive 2014/53/ EU, 2014/35/EU, 004/108/WE, 2011
/65/UE The full text of the EU declaration of conformity is available at the
following internet address
https://shelly.cloud/declaration-of-conformity/
Manufacturer: Allterco Robotics EOOD
Address: Sofia, 1407, 103 Chernivrah Blvd.
Tel: +359 2 988 7435
E-mail: support@shelly.cloud
Web: http://www.shelly.cloud
Changes in the contact data are published by the Manufacturer on the official
website of the Device http://www.shelly.cloud
The User is obliged to stay informed of any amendments to these warranty terms
before exercising his/her rights against the Manufacturer.
All rights to trademarks She® and Shelly®, and other intellectual rights
associated with this Device belong to Allterco Robotics EOOD.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>