LOKMAT ATTACKPRO Sport Smart Watch User Guide
- June 14, 2024
- LOKMAT
Table of Contents
User Guide
Please check if you have the following items:
Instructions
Upper right: Long press to switch on and off, short press to turn off the
screen.
Bottom right: Back, secondary menu.
Upper left: heart rate.
Bottom Left: Sports.
Set up the watch
ATTACK PRO is used in Android 4.4 and iOS 8.2 or above. You can download and
install Da Fit first through the following QR code.
http://plus.crrepa.com/app-download/dafit
Android: Search for Da Fit in the “Google Store” app market to download
it.
IOS platform: Search for Da Fit in App Store to download.
How to charge a watch and trouble：
- Before using the product, please charge it for 2 hours.
- If the connection between the charging cable and the charger is unstable, please reconnect the data cable and the charger.
- If you cannot turn on the device or charge it, please use a 5V/2A or higher charger to charge the device for more than 20 minutes to activate the battery.
Operation Introduction
Swipe the screen to the left : Voice assistant, call records, today’s
data, health monitoring, weather, camera control, music, breathing training
Swipe the screen right： Secondary menu
Slide Down Screen： Phone, About This Phone, Menu View, Vibrate On,
Brightness, Settings
Swipe Up Screen: display information.
Bluetooth connection operation steps
Download and open the Da Fit APP, search for the Bluetooth device “ATTACK
PRO”, and connect to Bluetooth 5.1
Function introduction
Dial Mode：Long press the dial interface to switch the dial.
CallFunction: Make calls, hands-free calls, hang up, call records, sync
contacts, adjust volume.
Menu：List menu, 8 sets of different UI styles, switch at will.
Information Push：After the phone is connected to the watch, it will
vibrate to remind you of incoming calls and text messages.
Weather: After the watch is connected to the APP, the weather interface
will display the weather status.
Music: After the watch is connected to the APP, it can control the music
player.
Sports: Walking, running, cycling, hiking, rope skipping, basketball,
volleyball, badminton, tennis, football, golf, table tennis, rock climbing and
more than 100 sports.
Sports Data: Display the number of steps, distance, and calories recorded
on the day, and you can set exercise goals in the APP.
HeartRate: Heart rate measurement, the green light is on to start the
measurement, and there will be a vibration reminder when it is completed.
Blood Pressure: For blood pressure measurement, the green light will
start the measurement, and there will be a vibration reminder after
completion.
Sleep Monitoring: Display the sleep monitoring status of the day
Blood oxygen: When blood oxygen measurement is completed, there will be a
vibration reminder.
Common Problem
Watch won’t turn on
Please press and hold the power button for more than 3 seconds or the battery
power may be too low, please charge it in time.
Bluetooth is not connected or unable to connect
- Please try to restart the watch and reconnect.
- Please try to restart the phone’s Bluetooth and connect again.
- Do not connect the mobile phone to other Bluetooth devices at the same time.
Inaccurate measurement of heart rate/blood pressure/blood oxygen
- Generally, it is caused by poor contact between the sensor of the watch and the human body during measurement.
- Please make sure that the sensor is in full contact with your wrist during measurement.
- For people with darker skin and more hair on their arms, please urn on the enhanced measurement in App[Device]> [Enhanced Measurement].
Sleep data is not accurate enough
- Sleep monitoring is to simulate a person’s natural falling asleep and waking time state, and it needs to be worn normally.
- Wear it when you fall asleep too late or when you fall asleep, errors may occur.
- Sleep data is not monitored during the day, and the default sleep monitoring is from 9:30 pm to 12:00 noon the next day.
For more frequently asked questions, please check App [My]> FAQ].
FCC STATEMENT
- This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/ TV technician for help.
FCC Radiation Exposure Statement:
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>