iclever IC-GK08 2.4G Wireless Keyboard and Mouse Combo User Manual

iclever IC-GK08 2.4G Wireless Keyboard and Mouse Combo

Package Contents

• 1 x Wireless Keyboard
• 1 x Wireless Mouse
• 1 x Micro USB Charging Cable
• 1 x uss Receiver Ht is stored at the bottom of the mouse) 1 x Keyboard Cover
• 1 x User Manual

Specification of Keyboard

Dimensions

Operating Range

Charge Time Uninterrupted Work Time

| 438.5 x 129 x 18.61mm / 17.26 x 5.08 x 0.73 in

< 10 m / 32.8 ft

< 2 hours

90 hours

---|---
Lithium Battery Capacity Key Life

Standby Time

| 280 mAh

3 million clicks

90 days

|

• Frequency band: 2402 MHz-2480 MHz
• Maximum transmission power: O dBm

Specification of Mouse

• Frequency band: 2405 MHz~ 2470 MHz
• Maximum transmission power: O dBm

Product Overview

Keyboard:

1. Fn Lock: press the key to activate or cancel the Fn lock function.
   When the indicator is on, you can directly access media and hotkeys by pressing the F1-F12 keys.

2. Numeric Indicator: press “numlk key to activate or cancel the number lock function for Windows (not working for Mac). When the light is on, the keypad works as 0.123456789.

3. Caps Lock Indicator: press the “caps lock” key to activate or cancel the
   caps lock function. When the function is on, the indicator is on.

4. Power Indicator: the indicator will be green for 3s when the keyboard is on. Press MFN” + MF6″ keys to check the power reminding, and each flash represents 25% battery power, 4 flashes in total.

5. Charging Indicator: stays red when charging, and turns off when fully
   charged.

6. Power Switch: slide right to tum on and left to turn off.

Mouse

1. ON/OFF Switch: slide ON/OFF to tum on/off.

2. Storage Slot: used to hold two AAA batteries (not included) and store
   the USB Receiver. NOTE: USB Receiver is stored in here.

3. DPI Switch: 3 adjustable dpi (800, 1200, 1600) are available. Press the DPI Switch button to change.

4. Scroll Button: for scrolling.

Keys and Function

Pairing Instructions

Step 1. Charge the keyboard for 2 hours.
Step 2. Remove the USB Receiver (both work for keyboard and mouse ) from the bottom of the mouse and insert two AAA batteries into the Storage slot (AAA batteries are not included).

Step 3. Move the mouse ON/OFF Switch to “ON” to power on.
Step 4. Plug the USB Receiver into the USB-A port of the computer.
*if your device is a USB-C port, please connect it by a hub.
Step 5. Move the keyboard power switch to “ONn to power on.
Step 6. Done, ready to use.

Device Requirements

Windows XPNista/7/8/10
Mac OS 10.14.6 or above with USB-A port
Note:

1. It is not fully compatible with Mac mini, smart TV, and XBOX.
2. If your MacBook is a USB-C port, please try to connect it by a hub,

Charge the Device

1. If your keyboard stop working: please directly connect to the computer port to charge the keyboard through our supplied charging cable.
   Note: Keyboard Output: DC 5V/200mA; USB Charger is not included.

2. If your mouse stop working: please change new two AAA batteries.

Sleep Mode
The keyboard and mouse will enter sleep mode if idle for 10 minutes.
Press any key and wait for 3s to exit sleep mode.

Language Change
Windows 10: win+ space or alt + shift
Mac OS: ctrl + space

Tips
Keep away from oil, chemical, liquid, and snacks.
Keep away from sharp objects.
Keep away from metal and other sources of the wireless signal.

Contact
For more questions, please contact us at support@iclever.com

Q. Is this keyboard fully compatible with MacBook and iMac?
No, it is not fully compatible. These keys “il are not working under MacBook and iMac.
In addition, if your device is MacBook with a type c port, the USB will not be able to connect, please connect the USB receiver by a hub, extender or something similar.
Q. How to Fix Keyboard Typing Multiple Letters on Windows?
Turn on the Filter Keys:
Click win key > Settings > Ease of Access > Keyboard > find “Use Filter Keys”, turn it on.
Q. How to Fix Keyboard Typing Multiple Letters on Mac?

1. On a Mac, choose the Apple menu> System Preferences”, click
   “Keyboard”, and choose the Keyboard tab.

2. Locate the “Key Repeat” slider setting and adjust it to the “Off position.

Q. Keyboard/Mice – Buttons or keys do not work correctly.

1. Restart your PC/laptop and iClever Keyboard/mouse.
2. Clean the button/key with compressed air.
3. Verify the product or receiver is connected directly to the computer and not to a hub, extender, switch, or something similar.
4. Unpair/repair or disconnect/reconnect hardware.
5. Windows only – try a different USB port.
6. Try on a different USB port or a different computer.

Q. Delay typing when using the device/connection drops/ cannot connect at all/buttons or keys do not work correctly.

• Restart your PC/laptop and iClever keyboard.
• Verify the product or receiver is connected directly to the computer and not to a hub, extender, switch, or something similar.
• Move the device closer to the USB receiver. If your receiver is in the back of your computer, it may help to relocate the receiver to a front port. In some cases the receiver signal gets blocked by the computer case, causing a delay.
• Keep other electrical wireless devices away from the USB receiver to avoid interference.
• Charge keyboard for 30 minutes and replace new AAA batteries for mouse.
• Check if there are any updates running in the background that may cause the delay.
• Try on a different USB port or try on a different computer.

Q. Cursor does not follow mouse movements.

1. Use a mouse pad
2. Avoid using your mouse on Glass and other see-through surfaces, Reflective surfaces, such as mirrors and metal desks, and Woodgrains and grooved surfaces
3. Try the mouse on a piece of white paper to make sure it isn’t a tracking issue on the particular surface you’re using.

Q. Miss the use Receiver.

1. The USB Receiver is located in the bottom of the mouse storage compart­ment. Please open the cover to get the USB Receiver.
2. Only one USB Receiver is included and both work for the keyboard and mouse.

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radioffV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

IC Caution
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>