aiwa RS-X150 Natsukasii Pro High-Fidelity Speaker User Manual
- June 5, 2024
- Aiwa
Table of Contents
aiwa RS-X150 Natsukasii Pro High-Fidelity Speaker
Important Safety Instructions
- Please do not place device near any form of heat sources.
- Please use the accessories specified by the manufacturer.
- Please refer all servicing/repairs to a qualified personnel should there by any form of damage to the device.
- Keep this user manual for future referencing/ troubleshooting.
- Please heed ALL safety cautions.
Safety Cautions
- Always keep device AWAY from fire and heat sources.
- Do NOT attempt to disassemble or alter the device.
- Do NOT expose device to excessive heat (Direct sunlight etc.).
- Do NOT immerse device into any form of liquids.
Unboxing
- RS-X150 Natsukasii Pro
- Type-C Charging Cable
- 3.5mm dual terminal audio line
- Handle
- User Manual
Product Specifications
- Model Number: RS-X150 Natsukasii Pro
- BT Version: V5.0
- Power Output: 30W X 2
- Driver: 5 inch1 + 2 inch2
- Frequency Response: 125Hz~16kHz
- Decoding: AAC, SBC
- S/N Ratio: 60dB
- Supported Profiles: MP3, WMA, WAV, FLAC
- Transmission Distance (Estimated): 10 Meters (No Obstacles)
- DC Input Voltage/Current: DC 5V/ 2A (Type-C)
- Battery: 6000mAh (Li-on)
- Playback Time: 11-12 Hours (50% Volume) ; 2-3 Hours (100% Volume) Charging Time: 12-13 Hours
- Dimensions: 300x180x180 mm
Product Overview
Function：Bluetooth,USB,TF, AUX IN ,TWS,DSP,Phone call,Power display
- Lever type power switch
- Forward skip buttons
- Play / pause, long press toggle between the different modes; short press phone call
- Backwards skip buttons
- Treble control knob
- Bass control knob
- Volume control knob
- Function LED indicator light
- Battery display
- Mic
- Charge LED indicator light
- USB Type-C (DC IN 5V) Charging port
- USB ports
- AUX IN input port
- TF ports
Bluetooth operation
- Switch on the speaker, enter Bluetooth mode. Function LED indicator shows flash. At the same time, the speaker prompts the voice to “bibi” and connects with the Bluetooth device according to the prompt.
- Switch on the relevant Bluetooth devices (smart phone, tablet PC and other devices) , connect the “Bluetooth name”. After success, the speaker prompts the voice.
- After the connection is successful, the music can be played through the sound box, function LED indicator light shows slow flash.
- Adjust the volume by means of a device or knob.
- You can switch to USB 、TF and AUX IN mode by pressing the “M” button.
TWS operation
- Need two pcs speakers of same model.
- Turn on the Bluetooth function of both speakers at the same time, find the ” ” key of one speaker, and then long press（3 seconds） it to pair. After a successful pairing, you will hear a connection notification sound from both speakers.
- Turn on a Bluetooth-enabled playback device (such as a mobile phone, tablet or computer) and pair it with the corresponding speaker model name.
- Make sure that the speakers is well connected to Bluetooth enabled playback devices.
- After the connection is successful, the music can be played through the speakers.
- Adjust the volume by means of a device or knob.
- Two speakers of the same model can exit TWS pairing by ” “button. You can switch to USB 、TF and AUX IN mode by pressing the “Mode” button.
USB、TF operation
- Insert USB、TF ,the speakers to the playback status automatically.
- Choose the music by buttons，adjust the volume by knob.
- You can switch to Bluetooth and AUX IN mode by pressing the “M” button.
AUX-in operation
- Connect speakers and devices (smart phone, tablet PC and other devices) through 3.5mm dual terminal audio line.
- Press the “M” button to switch to the audio input mode and play the music.
- You can switch to Bluetooth and USB 、TF mode by pressing the “M” button.
Phone call operation
In the case of Bluetooth connection, short press to answer the call, short
press again to end the call, long press to reject the call.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>