aiwa EB-X850ZANC Wireless Bluetooth Headphones User Manual

aiwa EB-X850ZANC Wireless Bluetooth Headphones

Important Safety Instructions

1. Please do not place device near any form of heat sources.
2. Please use the accessories specified by the manufacturer.
3. Please refer all servicing/repairs to qualified personnel should there by any form of damage to the device.
4. Keep this user manual for future reference/ troubleshooting.
5. Please heed ALL safety cautions.

Safety Cautions

1. Always keep device AWAY from fire and heat sources.
2. Do NOT attempt to disassemble or alter the device.
3. Do NOT expose device to excessive heat (Direct sunlight etc.).
4. Do NOT immerse device into any form of liquids.

Warnings: Using earphones/headphones at moderate to high volumes for extended periods of time will result in permanent hearing damage. We recommend that you always keep media playback volume level from low to moderate. Please do not use earphones while performing activities that require hearing surrounding noises/ sounds. (Driving, Cycling, jogging etc. )

Product Overview

Unboxing

• EB-X850ZANC Headphones
• 3.5mm Audio Cable
• Charging Cable
• User’ s Manual
• Carrying Case

Product Specifications

1. Model Number: EB-X850HANC
2. BT Version: V5.0
3. IP Rating: IPX4
4. Active Noise Cancellation: 20dB
5. Driver unit: 40mm
6. Frequency Response: 20~20kHz
7. Impedance: 32Ω
8. Microphone Sensitivity: -42 ± 3dB
9. Headphone Sensitivity: 95dB ± 3dB
10. Supported Profiles: HSP/HFP/A2DP/AVRCP/AAC/SBC
11. Transmission Distance (Estimated): 10 Meters (No Obstacles)
12. Battery: 650mAh (Type C : DC 5V 1A)
13. Playback/ Call Time: Up to 23 Hours
14. Standby Time:  ≥ 45 Days
15. Charging Time : 3 Hours
16. Weight: 306g

Product Usage Guide

AUDIO PLAYBACK VIA AUX 3.5mm PORT :
Connect the 3.5mm audio cable to your audio source and headphones. This automatically switches headphones to “Passive mode” where power is not drawn from the in-built batteries of the headphones. Please turn off headphones before listening via AUX 3.5mm Audio Cable.

Connecting the Product

1. Turn on Bluetooth (BT) on your mobile device.
2. Turn on Headphones. (Headphones will enter BT pairing mode)
3. Search and connect to ” EB-X850ZANC” from your mobile device

EB-X850ZANC will automatically connect to the last paired device if device is on and within connection range.

Multi-connect (Up to 2 devices/audio sources)
EB-X850ZANC can connect to up to 2 mobile devices at the same time.
To pair with two (2) devices:

1. Turn on Bluetooth (BT) on your mobile device A.
2. Turn on your Headphones. (Headphones will enter BT pairing mode)
3. Search and connect to “EB-X850ZANC” from mobile device A.
4. Turn off BT on mobile device A, and repeat the above for mobile device B.
5. Turn on Mobile device A again and the headphones will pair to both devices automatically.

Call Control while connected to 2 devices.
It will automatically prioritize incoming calls/ notifications and audio playback (Pause music on one device, and play music on the other)

Battery              Charging
Charging: Red Indicator Light
Full Charge: Extinguished Indicator Light
Approximate charging time:      3 Hours
EB-X850ZANC will turn off automatically after 5 minutes of disconnection/inactivity. Please charge the headphones every six (6) months.

Customer Service
Please visit www.int-aiwa.com for more product information. Contact your local authorized dealer/ customer service by referring to the warranty label/receipt provided with your purchase.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>