aiwa SB-X80 Adventure Mini IP67 Bluetooth Speaker User Manual
- June 5, 2024
- Aiwa
Table of Contents
User Manual
Important Safety Instructions
- Please do not install devices near any form of heat source.
- Please use accessories specified by the manufacturer.
- Please refer all servicing to qualified personnel should there be any form of damage to the device.
- Keep this user manual for future reference/ troubleshooting. 5. Please heed ALL safety cautions.
SAFETY CAUTIONS
- Keep the device AWAY from fire and heat sources at all times.
- Do NOT attempt to disassemble or alter the device.
- Do NOT expose the device to excessive heat. (Direct sunlight e.g.).
- The product label is located at the bottom of the product.
Unboxing
Please refrain from using any damaged components. Contact your local authorized Aiwa distributor/customer service
Device Overview
- Power button
- Play/Pause/TWS Connection/Disconnection
- Volume .1 Previous song (Short press)
- Volume +/Next song (Short press)
- Microphone
- Charging indicator
- Micro U513 charging port
- Reset button
- AUX-In Port
Device Walkthrough -Power ON/OFF
Hold power button 1 for 3 seconds. (Refer to device overview page)
Device Walkthrough – Connection
- Power on SB-X80.
- Find “38-X80” in the list of your mobile device and connect.
- Long press the play/pause button (Refer to device overview page) to terminate the connection.
‘Make sure there’s only one device connecting at the same time’ ‘Make sure devices are within a working distance (within 10 meters). Use the mode button to interchange playback mode (as in this corded’
Device Walkthrough – AUX Connection
- Power on 513-X80.
- Connect 3.5mm AUX cable.
Use the mode button to interchange playback mode (as In this order).
Device Walkthrough – Answering Calls
Short press – The play/Pause button to answer an incoming call.
Long press – Play/Pause button calls button to reject an incoming call.
Short press – Play/Pause button calls button to end an ongoing call.
Device Walkthrough – True Wireless Stereo
Double press the play button on both devices simultaneously to establish a TWS
connection.
After a successful connection,
Device unit with flashing LED – Host unit Device with noble LED – Secondary
right channel
Perform connection (refer to Device Walkthrough – Connection) with the Host
unit.
Long press the play button to terminate the TWS connection.
Device Walkthrough – Battery & Charging
Connect Micro-USB charging cable to any power source and to SB-X80 as shown.
Charging time – Approx. 3 Hours
Playback time – Approx. 10 Hours
‘Low battery indicator • ‘Beep” sound every 15 seconds X 3 before the device
automatic shutdown*
Cleaning & maintenance
Wipe down SB-X80 with a soft dry cloth.
Troubleshooting
I can’t find “SD-X8011 on my device’s list/ unstable connection.
- Make sure “Siii-X80” and your device are within working distance.
- Make sure SB-X80 is charged and has enough power.
- Re-attempt to pair again.
Disconnection occurred within working distance.
- Please make sure there are no metals or other materials within a relatively close range which will interfere with the connection.
Customer service
For more product information please visit
www.intaiwa.com.
Contact your local authorized dealer/ customer service. Refer to the warranty
label provided in the box.
Limited Warranty
Please refer to the warranty label provided in the box.
Note: Disassembling device voids warranty.
Device specifications
Model – SB-X80
Rated power – SW
Technology – V5.0
Bluetooth Profile – A2DP, HFP, HSP, AVRCP
Frequency response – 20Hz – 20KHz
THD – S1%
Connection Range – 20M Battery
Capacity – 1800mAh
Speaker Dimension – 85 x 85 x 46 mm
Weight – 215g
Electronics Intl Co., Ltd.
Explore more at www.int-aiwa.com
Aiwa Electronics Intl Co., Ltd. Explore more at www.int-aiwa.com
©All Rights Reserved