Panasonic WL22B WLAN+BT Module Adapter User Manual
- June 5, 2024
- Panasonic
Table of Contents
FCC ID : ACJ9TGWL22B
WLAN+BT module adapter
Model number: WL22B
User Manual
GENERAL
This device is a 2×2 Wi-Fi+Bluetooth® adapter.
Integration to the end product
- WL22B module is mounted on the main board.
- Insert Antenna unit into Antenna connectors of the WL22B module.
Technical Specification
a) Dimensions (W x L x H): 22mm x 30mm x 2.4mm
b) Weight: 2.83g
c) IEEE WLAN Standard: IEEE802.11a/b/g/n/ac/ax
d) Bluetooth: BDR, EDR, Low energy
e) Operating Temperature: -10 to 50 degree Celsius
f) Humidity: 30 to 80 %RH
g) Host interface: M.2: CNVio2
Regulatory Information
Caution: Exposure to Radio Frequency Radiation.
To comply with FCC RF exposure compliance requirements, a separation distance
of at least 14mm must be maintained between the antenna of this device and all
persons. This device must not be co-located or operating in conjunction with
any other antenna or transmitter.
Instructions to OEM Integrators
A User manual provided to the end user must indicate the operating
requirements and conditions that must be observed to ensure compliance with
the above-mentioned FCC RF Exposure guideline.
If this module is intended for use in a portable device, integrators are
responsible for separate evaluation and/or approval to satisfy FCC RF Exposure
requirements.
If other radio devices are to be integrated with this module, an additional
evaluation and FCC submission may be required. Integrators are responsible for
such additional evaluation and FCC submission.
The following information must be indicated on the host device of this module;
Model : WL22B
FCC ID : ACJ9TGWL22B
IC : 216H-CFWL22B
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>