Zummi 211183 Zip Push Chair Instruction Manual

Zummi 211183 Zip Push Chair

Zip Pushchair

Specifications

• Stroller (A) x 1
• Front wheels (B) x 2
• Rear wheels (C) x 2
• Bumper bar (D) x 1
• Canopy (E) x 1
• Raincover (F) x 1

Assembly

Step 1
Release the stroller (A) from the locked position by lifting the locking catch from over the locking rivet on the frame. Note: You may have to squeeze the legs and handles together first so as to release the tension on the rivet. Standing behind the stroller and holding it by the handle, lift the handle upwards to unfold the stroller.

Step 2a
Lean the stroller forward and press the rear wheel (C) post into the rear frame hub until it clicks into place. Repeat for the other side. Note: Pull on the rear wheels to ensure that it is securely attached to the stroller.

Step 2b
To remove the rear wheels, push the release button and pull the wheel from the hub.

Step 3a
Attach the front wheels (B). Insert wheel housing onto the front leg and push upward until you hear it click into position. Repeat for the other side.

Step 3b
To remove the front wheels, push the release button and pull the wheel from the hub.

Step 4a
Insert the canopy (E) clips into the slot located on each side
of the seat unit and fasten the Velcro fasteners on both sides.

Step 4b
Open the zip on the canopy to release the hidden extending panel.

Step 5
Attach the bumper bar (D) by aligning the anchors with the slots on the seat unit. Push until the bumper bar clicks into place. Note: The bumper bar must be securely attached before using this product. Press the buttons on both sides to remove the bumper bar.

Backrest Adjustment
Locate the backrest adjustment mechanism at the rear of the seat. Squeeze the clip on the reclining harness and gently lower the backrest. Alternatively, squeeze the clip on the reclining harness and gently pull up the backrest to the desired height. Warning! Always ensure that the seat is securely fixed in position before use.

Footrest Adjustment
Press the buttons on both sides of the footrest support to adjust it up or down.

Swivel Wheels
The front wheels are equipped with a swivel locking device. Turn the lock on each wheel down to activate swivel wheels.

Brakes
To engage brakes, apply downward pressure to the brake lever located on the rear axle. Check that the stroller does not move once the brakes are properly applied. To release, gently lift up on the brake lever. Warning! Always engage wheel brakes when the stroller is not moving.

Harness

1. Slide the shoulder strap buckle onto the housing of the waist strap buckle. Repeat for the other side.
2. Insert the completed buckle into the buckle housing until it engages securely in place. Listen for the click. Repeat for the opposite side.
3. Press the center button to release the child from the harness.
4. To adjust the harness, move the slides as shown. Warning! Always adjust the harness to fit your child correctly for their comfort and safety. A loose-fitting harness can be very dangerous.
5. The stroller has 3 shoulder-height positions. Warning! Always adjust the shoulder harness length according to baby height. To adjust the shoulder height position, feed harness tabs through slot (a) in seat unit. Re-insert the harness tabs through slots at desired height (b). Pull out from front of seat.

FAQ

• Q: How do I clean the stroller?
  A: The fabric parts of the stroller can be removed and hand-washed with mild soap and water. Do not use bleach. Wipe clean the frame and wheels with a damp cloth.

• Q: Can I use this stroller for newborns?
  A: Yes, this stroller is suitable for newborns and can be used with a compatible infant car seat or bassinet attachment.

• Q: Can I fold the stroller for storage or transportation?
  A: Yes, the stroller can be folded by squeezing the folding mechanism and pushing downwards. Refer to the user manual for detailed folding instructions.

• Q: Can I use the raincover while the canopy is extended?
  A: No, the raincover is designed to be used with the canopy closed. It may not provide adequate coverage if the canopy is extended.

• Q: How do I adjust the handle height?
  A: The handle height of the stroller is not adjustable. It is set at a comfortable height for most users.

WARNINGS

• Read these instructions carefully before assembly and use and
• keep for future reference. The child may be hurt if you do not follow these instructions.
• Before using, remove and dispose of any plastic bags and other packaging (e.g. fasteners, fixing ties, etc.) and keep them out of reach of children.
• WARNING! This vehicle is intended for one child from birth (0 months) and up to a maximum weight of 22kg or 4 years, whichever comes first.
• WARNING! Never leave the child unattended.
• WARNING! Ensure that all locking devices are engaged before use. WARNING! To avoid injury ensure that your child is kept away when unfolding and folding this product.
• WARNING! Do not let your child play with this product. WARNING! ALWAYS USE THE HARNESS RESTRAINT SYSTEM. WARNING! Always use the crotch strap in combination with the waist belt section of the harness.
• WARNING! This product is not suitable for running or skating. WARNING! Use the most reclined position for new born babies. WARNING! Any load attached to the handle affects the stability of the stroller.
• YOUR CHILD’S SAFETY IS YOUR RESPONSIBILITY.
• Do not let children play with or hang on the stroller.
• Do not overload this stroller with additional children, goods or accessories.
• Bags and other items should not be hung from the handle as this
• can affect the stability of the stroller.
• Overloading, incorrect folding and the use of non-approved accessories is unsafe and may damage or break this stroller.
• Do not use parts or accessories which are not approved by the manufacturer.
• Always apply the parking brake when the stroller is stationary.
• Ensure the parking brake is engaged during the loading and unloading of children.
• Do not allow your child to climb into the stroller.
• Never leave a raincover, hood or apron on indoors, in a hot
• atmosphere or near a heat source as your child my overheat.
• Be careful when going up or down kerbs.
• Remove your child and fold the stroller when going up or down escalators.
• If your stroller is used by someone unfamiliar with it e.g.
• Grandparents, always show them how it works.
• Do not use this stroller near an open fire or exposed flame.
• Take care in windy conditions.
• To prevent damage, always remove the rain cover before folding the stroller.
• Do not place anything on top of the rain cover.
• To prevent your child over heating, always fold or remove a
• rain cover when indoors or in warm environments.
• A basket is provided for the carriage of 5kg of items evenly distributed.
• This product conforms to EN 1888-2:2018+A1:2022.

Parts List

Assembly:

1. Release the stroller (A) from the locked position by lifting the locking catch from over the locking rivet on the frame.
   Note. You may have to squeeze the legs and handles together first so as to release the tension on the rivet.

2. Standing behind the stroller and holding it by the handle, lift the handle upwards to unfold the stroller.

3. 2a. Lean the stroller forward and press the rear wheel (C) post into the rear frame hub until it “clicks” into place. Repeat for the other side.
   NOTE. Pull on the rear wheels to ensure that it is securely attached to the stroller.

4. 2b. To remove, push release button and pull wheel from hub.

5. 1.  3a. Attach the front wheels (B). Insert wheel housing onto the front leg and push upward until you hear it “click” into position. Repeat for other side.

6. 3b. To remove, push release button and pull wheel from hub.

7. 1.  4a. Insert the canopy (E) clips into the slot located on each side of the seat unit and fasten the Velcro fasteners on both sides.

8. 4b. Open the zip on the canopy to release hidden extending panel.

9. Attach the bumper bar (D) by aligning the anchors with the slots on the seat unit. Push until the bumper bar “clicks” into place.
   NOTE. The bumper bar must be securely attached before using this product. Press the buttons on both sides to remove the bumper bar.

Backrest Adjustment:

Locate the backrest adjustment mechanism at the rear of the seat. Squeeze the clip on the reclining harness and gently lower the backrest. Alternatively, squeeze the clip on the reclining harness and gently pull up the backrest to the desired height.

WARNING! Always ensure that the seat is securely fixed in position before use.

Footrest Adjustment:
Press the buttons on both sides of the footrest support to adjust it up or down.

Swivel Wheels:
The front wheels are equipped with a swivel locking device. Turn the lock on each wheel down to activate swivel wheels.

Brakes:

• To engage brakes, apply downward pressure to the brake lever located on the rear axle. Check that the stroller does not move once the brakes are properly applied.
• To release, gently lift up on the brake lever.

WARNING! Always engage wheel brakes when the stroller is not moving.

Harness

1. Slide the shoulder strap buckle onto the housing of the waist strap buckle. Repeat for the other side.

2. Insert the completed buckle into the buckle housing until it engages securely in place. Listen for the “click”. Repeat for the opposite side.

3. Press the centre button to release child from harness.

4. To adjust the harness, move the slides as shown.
   WARNING! Always adjust the harness to fit your child correctly for their comfort and safety. A loose fitting harness can be very dangerous.

5. The stroller has 3 shoulder height positions.
   WARNING! Always adjust the shoulder harness length according to baby height. To adjust the shoulder height position, feed harness tabs through slot (a) in seat unit. Re-insert the harness tabs through slots at desired height (b). Pull out from front of seat.

Seat Fabric Removal:

1. Unfasten the press studs located on the stroller frame and remove the cover off the hooks.
2. Unfasten the middle wedding fastener located under the seat and the strap under the footrest. Remove the seat fabric.
   To re-install the seat fabric, reverse the above steps.

Folding

1. Fold the canopy and apply the brake.
2. Slide the folding button across and push up the safety lock.
3. Push the stroller handle down until the lock engages with a “click”.

Care and Maintenance

• The product requires regular maintenance to ensure correct and safe performance.
• Regularly inspect the wheels, locks, brakes, harness, catches, seat adjusters, joints and fixings to ensure they are clean, operating correctly and in full working order.
• Replace tyres if they are excessively worn.
• Do not use this product if any part is broken, torn or missing and use only spares provided by the manufacturer.
• If parts become stiff or difficult to operate, ensure dirt is not the cause, then try a light application of a silicon lubricant, ensuring it penetrates between the components. Regular lubrication of moving parts will extend the life of your product and make opening and folding easier.
• The stroller should be serviced and reconditioned before using for a second baby, or within 18 months, whichever is sooner.
• After exposure to damp conditions, dry off with a soft cloth and leave fully open in a warm environment. Storing damp will encourage mildew to form.
• Store in a dry place.
• Do not leave in sunlight for prolonged periods as some fabrics may fade.
• Spot or sponge clean fabrics with mild detergent.
• Use mild soap or upholstery shampoo.
• Wash separately.
• NEVER use bleach.
• Dry in shade thoroughly before reuse and avoid direct heat and sunlight.
• Do not iron.
• Do not dry clean.
• Wipe clean plastics and metals with damp cloth.
• Never clean any part of the product with abrasive, ammonia based, bleach based or spirit type cleaners.
• Ensure the product is fully dry before use or storage.
• Always ensure the product is stored in a dry place to prevent mold or mildew developing.

Customer Service:reachout@euroactiveproducts.com
Due to variation in style and design the illustrations used in this instruction manual are generic. Variation in design may occur in the images shown.

Supplied by Euroactive HK. Ltd.
79/ 80 Furze Road, Sandyford Business Estate, Dublin 18. Ireland
International House, 12 Constance Street, London, E16 2DQ, United Kingdom
A3/ 3Fl, West Wing TST Centre, 66 Mody Road, TST East, Kowloon, Hong Kong

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>