SHURE BT1 Bluetooth Earphones User Guide

June 5, 2024
Shure

SHURE BT1 Bluetooth Earphones

 **User Guide**

SHURE BT1 Bluetooth Earphones User Guide

BT1

Shure Bluetooth ® Earphones

Bluetooth Pairing

SHURE BT1 Bluetooth Earphones - Bluetooth Pairing

  1. Turn off the earphones. Press and hold center button on earphone remote until the LED flashes blue and red.
  2. From your audio source, select “Shure BT1.”
  3. LED turns blue when successfully paired.

For additional pairing options, please visit https://www.shure.com/earphones.

The best sound starts with a good fit

SHURE BT1 Bluetooth Earphones - The best sound starts with a good
fit

  • Select the sleeve that provides a snug fit (like earplugs).
  • Secure the cable behind the ear to maintain a tight seal.

To keep them sounding their best…

  • Clean regularly to remove debris and deposits.
  • Contact Shure Service and Repair to replace damaged product.

Note : Certain models of Shure earphones feature a detachable cable with MMCX connection for easy replacement. Simply detach and return to Shure Service
and Repair.

Changing Sleeves

  • Gently twist and pull to remove sleeve.
  • Install the new sleeve so it completely covers the barb and nozzle.

Visit http://www.shure.com/earphones for replacement parts and important instructions on cleaning and maintenance.

Using the Remote

The Center Button

SHURE BT1 Bluetooth Earphones - The Center Button

Up and Down Buttons

SHURE BT1 Bluetooth Earphones - Up and Down Buttons

Your phone may not be compatible with some functions. Visit http://www.shure.com/earphones for more information.

Charging the Earphones

Red LED indicates low battery.

  1. Connect earphones to charging device using supplied cable.
  2. LED is red while charging.
  3. When earphones are charged, LED turns off

Warning : Before charging, make sure the product is at room temperature, between 0 to 45°C (32 to 113°F).

Note : Use this product only with an agency approved power supply which meets local regulatory requirements (e.g., UL, CSA, VDE, CCC, INMETRO)

Specifications

Bluetooth Specifications

Antenna Information

  • Type = Chip
  • Gain = +2.13 dBi

Bluetooth 4.1

  • Operating frequency = 2402MHz-2480MHz
  • Modulation scheme = FHSS
  • RF power = +5.38dBm (E.I.R.P.)

Battery Type

SHURE BT1 Bluetooth Earphones - Battery Type

Nominal Voltage

SHURE BT1 Bluetooth Earphones - Nominal Voltage

Battery Life

SHURE BT1 Bluetooth Earphones - Battery Life

Total Battery Life

SHURE BT1 Bluetooth Earphones - Total Battery Life

Charging Requirements

USB Source

SHURE BT1 Bluetooth Earphones - Charging Requirements

Charging Time

SHURE BT1 Bluetooth Earphones - Charging Time

Quick Charge

SHURE BT1 Bluetooth Earphones - Quick Charge

Battery Charging Temperature Range

SHURE BT1 Bluetooth Earphones - Battery Charging Temperature
Range

Safety Information

Visit http://www.shure.com/earphones for the latest regulatory and compliance information.

WARNING

  • Follow instructions from manufacturer.
  • Product battery may explode or release toxic materials. Risk of fire or burns. Do not open, crush, modify, disassemble, heat above 140°F (60°C), or incinerate.
  • Attention should be drawn to the environmental aspects of battery disposal.
  • Product shall not be exposed to excessive heat such as sunshine, fire, or the like.
  • Do NOT make unauthorized alterations to this product.

Note : Battery replacement to be performed only by Shure authorized service personnel.

CAUTION : Follow applicable laws regarding mobile phone and headphone use while driving.

This product contains magnetic material. Consult your physician on whether this might affect your implantable medical device.

Information to the user

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference.
  2. This device must accept any interference received, including interference that may cause undesired operation.

Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This device complies with FCC Part 15.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This Class B digital apparatus complies with Canadian ICES-003.

Note : Testing is based on the use of supplied and recommended cable types. The use of other than shielded (screened) cable types may degrade EMC performance

SHURE BT1 Bluetooth Earphones - nom,nyce

TRA REGISTERED No: ER56780/17
DEALER No: 67442/17

The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Shure Incorporated is under license. Other trademarks and trade names are those of their respective owners.

Environmentally friendly disposal

Old electrical appliances must not be disposed of together with the residual waste, but have to be disposed of separately. The disposal at the communal collecting point via private persons is for free. The owner of old appliances is responsible to bring the appliances to these collecting points or to similar collection points. With this little personal effort, you contribute to recycle valuable raw materials and the treatment of toxic substances.

Paraguay Distributor: Microsystems S.R.L., Senador Long 664 c/Dr. Lilio, Asunción, Paraguay

Certifications

This product meets the Essential Requirements of all relevant European directives and is eligible for CE marking.

CE Notice: Hereby, Shure Incorporated declares that this product with CE Marking has been determined to be in compliance with European Union requirements. The full text of the EU declaration of conformity is available at the following site: https://www.shure.com/en-EU/support/declarations-of- conformity.

Authorized European representative:
Shure Europe GmbH
Department: Global Compliance
Jakob-Dieffenbacher-Str. 12
75031 Eppingen, Germany
Phone: +49-7262-92 49 0
Fax: +49-7262-92 49 11 4
Email: EMEAsupport@shure.de

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals