JUNQOKW QW202203001 Smart Led Strip Lights 65.6ft Instructions
- June 5, 2024
- JUNQOKW
Table of Contents
Smart Led Strip Lights 65.6ft
Instructions for Use
version number:QW202203001
Thank you for choosing our company’s products, please read this instruction manual carefully before use.
Thank you for using our products. Please read this manual patiently before.
Product Parameters
LED Type:5050 RGB
Input Voltage: AC100-240V
Output Voltage:DC 24v
Maximum Power: 24W
Length Of Strip Light: 1×65.6FT
Beam Angle: 120°
Working Temperature: -20℃~ +45℃
Strip light Products Connection
Schematic diagram of product connection (pay attention to the arrow identification of the control box connector and strip light connector)
1.1. Power connection
1.2. Light strip connection
1.3. Please pull out the battery separator before using the remote control
1.4. Paste the light strip: The light strip has its own back glue.
Tear off the protective film when using it, and press it while pasting
it 1.5. The angle
of the light strip: Gently fold the corner when you meet the corner (pay
attention not to fold components and lamp beads)
1.6. Light strip connection: If you don’t pay attention to cutting off the light strip, you can use the connection buckle to connect it, as shown in the following figure
Remote control function
Please pull the strip light away, do not roll it for a long time (it is easy
to burn out the strip light when rolling it).
After connection, connect the power adapter to the patch panel or wall socket.
After power-on, the strip light will light up and check whether there is any
bad light.
If everything is normal, use the configured remote controller to test the
function.
The functions of remote control keys are as follows:
Connect Alexa
3.1 Download “Amzon Alexa APP” in the app market
3.2 Add your Echo sound to “Amazon Alexa APP” (Echo sound after the second
generation has mesh function)
3.3 Make sure the Echo stereo at home is turned on and connected to the home
network (if not, please refer to the instructions for Echo stereo)
3.4 Light strip distribution network status (distribution network mode in the
following situations):
3.4.1.After correctly connecting the light strip, control box, and power
supply, the flashing light strip indicates that it has entered the
distribution network state, and the next step of connecting Alexa; can be
started; (If you use the remote control to press the music mode before
distributing the network and cause the light strip to flash, please use the
remote control to press any other static color key, and then adjust the
network status in 3.4.2 or 3.4.3 below) 3.4.2.After correctly connecting the
light strip, control box, and power supply, the light strip is always on. Use
the 44-key remote controller and press and hold the “ON” in the upper right
corner for more than 5 seconds. The light strip becomes a flashing state,
indicating that it enters the distribution network state, and you can start
the next step of connecting Alexa;
3.4.3.After correctly
connecting the light strip, control box, and power supply, the light strip is
always on, the power connector on the control box can be unplugged and plugged
three times, and the “ON-OFF-ON-OFF-ON” light strip lights up and flashes.
At this time, it enters the distribution network state and can start the next
step of connecting Alexa
3.5 Connecting configuration strip light
3.5.1 Configuring Strip light with Voice
—Say to Alexa speaker by voice: Alexa, is your software up to date?
—After the update is completed, say to Alexa speaker: Alexa, discover device.
After 45 seconds of searching for devices, you will be prompted to find the
first light. In the Devices interface, finding the first light devices
indicates a successful distribution network.
—Click First light to control the switch, more color change.
—-You can voice to the Alexa speaker and say:
“Alexa, turn on the first light”, turn on the strip light
“Alexa, turn off the first light”, turn off the strip light
“Alexa, turn the first light to the red”, set the strip light to red
Warning
Do not immerse in water
Do not immerse in fire
Children under the age of 16 should use this product under adult supervision.
E-mail:JUNQOKW@foxmail.com
If you have any questions after receiving the products, please contact our
customer service, we will reply to you within 24 hours.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>