Amazon Basics Full Motion Articulating TV Monitor Wall Mount for 22-55 Inch TVs and Flat Panels-Complete Features/User Guide
- June 5, 2024
- amazon basics
Table of Contents
Amazon Basics Full Motion Articulating TV Monitor Wall Mount for 22-55
Inch TVs and Flat Panels
Specificatiosn
-
DIMENSIONS :.22 – 55 inches
-
WEIGHT : 8.09 pounds
-
MAX LOAD: 80 lbs.
-
MOUNTING PATTERN: 100x100mm
200 x 100 mm
200 x200 mm
300 x200 mm
300×300 mm
400 x200 mm
400×300 mm
400×400 mm -
TILT RANGE: – to 10° up/down
-
PROFILE: 375″ -16.125″ (60-410 mm)
-
BRAND: Amazon Basic
Introduction
Amazon Basics TV mount is a full motion articulating TV monitor wall mount. It is suitable for TVs having a size of 22-55 inches. It can handle a weight up to 80 lbs. max. The TV mount features a tilt angle of 15 degrees providing optimal viewing and reducing screen glare. The heavy-duty steel arm of the mount can be extended up to 16.3 inches from the wall. It has the ability to swivel left to right up to range of 180 degrees. This TV mount can fit VESA mounting holes from 100×100 to 400x400mm; no adaptors needed for 200×200 or 200x100mm.
Tools needed
Voltage detector
Stud Finder
Delivery Content
Important Safety Instructions
- Read these instructions carefully and retain them for future use. If this product is passed to a third party, then this instruction must be included.
- Risk of injury and/or property damage.
- Do not exceed the maximum weight included.
The wall mount is intended for use only with the maximum weights indicated. Use with products heavier than the maximum weights indicated may result in collapse of the wall mount and the attached TV, causing possible injury and property damage.
- This product is for indoor private household use only and therefore should not be used in public places like restaurants or hotels
- Be cautious when opening/closing (folding/unfolding) the product. Keep hands away from the folding mechanisms to prevent fingers from being trapped and pinched.
- Keep children and pets away while installing the product. This product contains small parts that could be a choking hazard if swallowed.
- Do not use this product if any parts art missing, damaged, or worn,
- Do not over-tighten the fasteners
- Regularly examine the product for wear and tear. Stop using the product at first sign of damage or if parts become detached.
- Always support the TV with your hands when making adjustments. Make sure to tighten fasteners and other connections well, but do not over-tighten them.
- Never use an electric power tool to tighten fasteners
Installation
- For additional illustrated mounting/assembly / installation steps, refer to the end of the written instructions
- This product should be installed only by an experienced adult. if in doubt, consult a professional
- Two competent adults must install this product.
- Refer to the instruction manual provided with the TV you are going to install on this product. It includes additional information for mounting, ventilation and suitable mounting locations. Compare the technical data and requirements to make sure that this product is suitable for the TV
- Before mounting, determine the suitable mounting location. The product must be fixed to a wooden or masonry/concrete wall using fasteners that are appropriate for the mounting surface. Do not install on drywalls, wall boards or thin plywood. The mounting surface must be capable of supporting at least 4 times the weight of the product and the TV.
- The maximum wall covering thickness such as gypsum drywall, lath, plastic, etc. should not be greater than 0.63″ (16 mm) for wood stud walls or 0.4 (10 mm) for masonry walls.
- For wood stud walls: This product is designed to be mounted to a 2×4 (51 mmx 102 mm) and Grade No. 2, wood stud.
- Do not drill into any pipes or power lines beneath the surface during mounting holes preparation. Use voltage/metal detector before drilling any holes to eliminate any such potential risks.
- Do not modify the structure of this product in any way
- if the product is to be attached to any structure other than specified in this user manual, only a licensed professional contractor/installer should perform this installation. The mounting surface must support, at minimum, 4 times the combined weight of the mounting bracket and the TV. It is the responsibility and liability of the installer to ensure the suitability of the supporting structure.
- Never install onto furniture This can lead to instability resulting in personal injuries and/or property damage
NOTICE : The product is made to ft various TVs with different dimensions. Not all fasteners delivered are needed for installation of the product.
Before Assembly
DANGER Risk of suffocation!
- Keep any packaging materials away from children and pets-these materials are a potential source of danger, e.g., Suffocation.
- Remove all the packing materials.
- Remove and review all components before starting assembly
- Check the product for transport damages
Disposal Dispose of the product according to local regulations. If in doubt, consult your local authorities
Feedback and Help
We would love to hear your feedback. To ensure we are providing the best customer experience possible, please consider writing a customer review.
Scan QR Code below with your phone camera or QR reader
US:
UK: amazon.co.uk/review/review-your-purchases#
If you need help with your Amazon Basis product, please use the website or number below
US: amazon.com/gp/help/customer/contact- us
UK: amazon.co.uk/yp/help/customer/contact- us
+1877-485-0385 (US Phone Number)
FREQUENTLY ASKED QUESTIONS
-
Will this support a 40in Vizio 4k?
Yes, it will support this TV -
What are the dimensions of the base of the mount? The panel that attaches to the wall.
The dimensions of the base of the mount is 3″x12.5. -
Does it work with VESA 100 x 150?|
No, it doesn’t work VESA 100 x 150. -
Would the tv be easy to remove from mount for traveling in an RV?
Yes, it is easy to remove. -
How far does it stick out from the wall?
About 3 inches. -
How long is the wall mounting bar?
It is about 27.7 inches. -
Will this mount an LG curved OLED?
Yes, the kit comes with spacers that can be used for curved TVs. -
Does it fit Vizio tv model# d32h-F4 ?
Yes, it fits the Vizio TV model model#d32h-F4. -
How long is the arm?|
The arm is about 12” long. -
Is this compatible with a 55-inch TCL Rocky TV?
Yes, it is compatible with 55” TCL rocky TV. -
Does this mount have a small rotation adjustment on the mounting plate as other makes/models tend to have 3–5-degree adjustment post-installation?
Yes, using the set screws to lock it in place.
https://m.media-amazon.com/images/I/D1lGA5E+uDL.pdf
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>