AccLoo A4 Security Camera HD 1080P Wireless Portable Small Camera Instruction Manual

AccLoo A4 Security Camera HD 1080P Wireless Portable Small Camera

Equipment network

Download and install the APP (APP Name：HWDVCam)
Method 1： App store download
(1)Android phone search for HWDVCAM in Google Store.
(2) iOS user can search “HWDVCam ” in Apple App Store.
Method 2： Use the mobile browser to scan the QR code below to download

Open the camera app, click the plus sign “+” in the upper right to add a camera, select the first one”Configure device to WiFi network”

After the camera is turned on, confirm that the indicator light flashes green, enter the phone to set WiFi, connect to “HW-XXXX” is the camera
hotspot at the beginning, return to APP point. Select your home’s WiFi, then enter the WiFi password, then click to start configuration (not supported twice Verified WIFI, such as WIFI on KFC and high-speed trains) After waiting for the configuration to succeed, a camera window will appear on the APP homepage. Click on the window to enter the camera, set the password of the camera and configure it.

AP hotspot direct connection

1. Turn on the camera and confirm that the green indicator light flashes (if not, press the reset button to restore the factory settings)
2. Turn on the phone’s WiFi settings and connect to the camera hotspot starting with “HW-XXXX, such as “HW-8888″”
3. Open the camera application HWDVCam, you will find that the APP home page has a camera window, click to go to watch

note:
The connection distance of the AP hotspot mode is about 10 meters, and there is no limit to the distance after the distribution of the network; Mobile phone will break the network in AP hotspot mode

main interface description

1. Picture quality
2.  Time
3.  Sound
4.  play / Pause
5.  Take a photo
6.  Video （recorded on your phone）
7. Setting
8.  Clarity adjustment
9.  Full screen
10.  Motion detection alarm
11.  Video and playback
12.  Voice（This device does not have）

Add a networked camera method

Add LAN (the phone and camera are connected to the same WiFi) Click the plus sign at the top right of the home page, select the second “Add online device”, select the new device, enter the password of this camera and press OK.

Manually add devices
Select the third “Manually add device”, manually enter the
device UID or scan the device UID QR code, enter the change device password and click OK.
Note: Add devices manually
Please make sure: 1. The device is connected to the network; 2. The device has already set a password (UID can be viewed in the device information, there is a device QR code)

Design interface

View the interface

Android APP file directory

Video page screenshot:

• Phone folder ：HWDVCam/UID/Snapshot
  For example : HWDVCam/UZUBW272DCRVNZBY111A/Snapshot

Video Page Video:

• Phone folder ： HWDVCam/UID/Record
  For example: HWDVCam/UZUBW272DCRVNZBY111A/Record

Remote playback download:

• Phone folder ： HWDVCam/UID/Download
  For example: HWDVCam/UZUBW272DCRVNZBY111A/Download

Motion detection pictures:

• Phone folder ： HWDVCam/UID/Alarm
• For example: HWDVCam/UZUBW272DCRVNZBY111A/Alarm
  Note: The ios system directly clicks on the image page, video, remote playback,directly download and save to the mobile phone album.

Product parameters

Common problems and solutions

1. The permissions for reminding when downloading the app must be all open;
   About the use scenario of reset (factory reset

2. The camera fails to connect to the network (remote connection), and the mobile phone cannot search for the WIFI hotspot of the camera;

3. The router’s WIFI password or name has changed, or the camera needs to be connected to another WIFI;

4. How to restore the factory settings: When the camera is powered on, press and hold the reset button for about 10 seconds until the green light flashes, and the device successfully restores the factory settings.

5. Before the camera starts to set up, please turn it on and plug it in, and set it within the range close to the router;

6. The camera needs to be turned on to charge;

7. The memory card needs to be inserted when the camera is turned off;
   (the memory card format needs to be FAT32 format)

Indicator light instructions

1. Charging: The red light is always on, and the light is off when it is full;
2. Recording while charging: the red light is always on and the green light is flashing; Point-to-point mode: The device is not connected to the device hotspot, the device is off and the green light is blinking;
3. Point-to-point mode: the mobile phone is connected to the device hotspot, the device blue-green light is off, and the green light is on;
4. Remote configured: the blue and green lights are always on;
5. Remote switching proximity: the blue light is off and the green light is flashing;

Product warranty

Dear users, Hello:
First of all, thank you for choosing this product. Please read the following terms carefully before using this product.

1. The warranty period for this product is one year from the date of receipt of the goods (subject to the valid proof of purchase).During the warranty period, all the faults caused by the quality problems of the products under normal use areThe company will give free repairs;
2. The following conditions are not part of the free service:
   1、The user is damaged due to improper use, use, or management;
   2、Disassemble the product by itself;
   3、Damage caused by accident, abuse, misuse, water, flooding,fire or other natural
   disasters or due to improper use or unreasonable maintenance (including damage due to external forces);
   4、The product is not in the warranty period;
   If the product sent back does not meet the warranty terms, the company will charge the corresponding cost for repairing it.
   For every after-sales service beyond the warranty period, we will charge the corresponding maintenance fee and replacement parts fee according to the minimum standard.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>