soundcore A3167 Flare Mini Bluetooth Speaker User Manual
- June 5, 2024
- Soundcore
Table of Contents
soundcore A3167 Flare Mini Bluetooth Speaker
Safety Instructions
- Avoid dropping.
- Do not disassemble.
- Soundcore Flare Mini can be immersed in water up to 1m for up to 30 minutes.
- Do not use the device outdoors during thunderstorms.
- Do not use any corrosive cleaner/oil to clean.
- Do not expose batteries to high heat as direct sunlight, fire and Etc.
What’s Included
At a Glance
- Bluetooth Button
- Volume + and – Buttons
- Multi-function Button
- Light Effects Button
- Power Button
- Micro USB Port
Using Your Soundcore Flare Mini
Turn On / Off
- ON: Press
- OFF: Press and hold for 2 seconds
Bluetooth mode
When turned on, Soundcore Flare Mini will automatically connect to the last
connected device if available. If not, press the Bluetooth pairing button to
activate pairing mode.
To pair a different device, press the Bluetooth button to re-enter pairing
mode. Then repeat the pairing steps. Have connection problems? Remove
Soundcore Flare Mini from your device’s Bluetooth history and ensure it’s less
than 3 feet away. Then try pairing again. To get the best sound quality, make
sure there is a clear line of sight between the connected device and your
speaker.
Charging your Soundcore Flare Mini
Use the included USB cable to charge your Soundcore Flare Mini and make sure it is fully charged before its first use. Disconnect your speaker from the charger when fully charged. Do not charge your speaker for extended periods. When not in use, store your speaker in a cool place.
Specifications
Specifications are subject to change without notice.
- Input: 5 V 1 A
- Audio output: 5 W x 2
- Battery capacity: 2600 mAh
- Charging time: 3.5 hours
- Playtime (varies by volume level and music content): 12 hours Size: 141 x 86 x 72 mm
- Weight (without packaging): 480 g / 16.9 oz
- Bluetooth version: V4.2
- Range: 20 m / 66 ft