DORNLAT DTKJ-U-0814 Skull Bluetooth Speakers User Manual
- June 5, 2024
- DORNLAT
Table of Contents
DORNLAT DTKJ-U-0814 Skull Bluetooth Speakers
Thank you for purchasing Mad Skull Speaker. Please read this manual carefully before use. We will not be responsible for any damage caused by using the speaker improperly.
Safety Instruction
Please read and follow the instructions below to ensure that you can use this unit safely and in a correct method. Please keep this manual for future reference.
Warning: To prevent any fire or electrical hazards, do not disassemble or replace any part of the unit. Please contact a professional maintenance person or qualified service center if there is any damage to the unit.
- Do not use fast charging adapter.
- Do not let children play this unit alone without adult supervision.
- This product is not waterproof; put it away from high temperature. Freezing area will decrease this product performance;
- Don’t block the area above the speaker mesh.
Accessories
- Mini USB cable ( for charging )
- 3.5mm Audio cable ( Aux input cable )
Aux input connector
Plug the speaker to other device with mini aux, turn on the speaker and it will automatically play the music after 2 seconds.
Function
The speaker has a Bluetooth function and supports stereo audio Bluetooth transmission. No need to use complicated connections or long wires – just listen to high quality music! Support TF card reader, USB Disk and USB sound card.
Bluetooth Function
Press the power button until you hear a ‘ha ha ha’ sound. The laughing sound will be followed by the blue light flashing. The device is now on searching mode.
Connect to mobile phone
- Select phone Bluetooth mode and start searching for the devices, iPhone will automatically go into Bluetooth search mode.
- If your phone screen displays ‘skull’ , this means your phone has found the Bluetooth speaker – select and connect it.
- If you need to enter the password to connect, please enter “DODO”
- If the connection was successful, the Bluetooth symbol on the display of your phone will change color or shape. Now you can play music from your mobile phone.
Specifications
Speaker Interface:
- Audio input connector; 3.5mm aux cable: support aux external audio input
- Charging interface: Mini USB Cable
- Dimension: 4.3″ x 5.3″x 5″ (11cm x 13,5cm x 12,7cm)
- Material: Base ABS plastic
- Weight 0.925Ib (420g)
Electrical Specifications:
- Compatibility: Adapted Bluetooth 2.1, support A2DP Vl.2, AVRCP Vl.4 profiles, TF, USB
- Transmission distance: 33ft (10 m). Transmission distance can change due to different environmental factors and phone Bluetooth device
- Maximum output power: SW
- Signal to noise ratio S / N: .:: 75dB
- Frequency Range: 60Hz-15KHz
- Distortion THO: :5 1%
- Speaker unit: outer diameter 2,24 in (5, 7 cm), SW
- Power parameters:
- Rated voltage: 3. 7V DC
- Battery: lithium-ion battery, 3. 7V /120DmA
- Charge voltage: 5V ± 0.25V
- Charging time: 2-3 hours
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>