Car Keys Express V3.0221 Remote Control Keys User Guide
- June 5, 2024
- Car Keys Express
Table of Contents
Car Keys Express V3.0221 Remote Control Keys
COMPATIBILITY LOOKUP
MAKE/ YEARS PAIR
MODEL CODE
FORD
C-Max
|
2013-2018
|
2
Crown Victoria| 2000-2005| 1
Crown Victoria| 2006-2011| 2
Edge| 2007-2015| 2
Escape| 2001-2018| 2
Escort| 1998-2003| 2
Expedition| 2003-2017| 2
Explorer| 2000-2015| 2
Explorer Sport| 2000-2005| 2
Five Hundred| 2005-2007| 2
Flex| 2009-2017| 2
Focus| 2000-2006| 3
Focus| 2007| 4
Focus| 2010-2018| 2
Freestar| 2004-2007| 2
Freestyle| 2005-2007| 2
Fusion| 2006-2011| 2
Mustang| 2000-2009| 2
Mustang| 2010-2014| 2
Taurus| 1998-2009| 2
Taurus| 2008-2018| 2
Taurus X| 2008-2010| 2
Thunderbird| 2003-2005| 2
Transit| 2013-2014| 2
Transit Connect| 2016| 2
Windstar| 1999-2004| 2
LINCOLN
Aviator
|
2003-2005
|
2
LS| 2003-2006| 2
MKS| 2009-2012| 2
MKX| 2007-2010| 2
MKZ| 2007-2017| 2
Navigator| 2003-2017| 2
Zephyr| 2006| 2
MERCURY
Cougar
|
1999-2002
|
5
Grand Marquis| 1998-2005| 1
Grand Marquis| 2006-2011| 2
Marauder| 2003-2004| 1
Mariner| 2007-2011| 2
Milan| 2006-2011| 2
Montego| 2005-2007| 2
Mountaineer| 2002-2009| 2
Tribute| 2007-2011| 2
Sable| 2008-2009| 2
PAIRING INSTRUCTIONS
Instructions have timing requirements. Waiting too long between steps may result in your vehicle’s computer timing out, requiring you to start over. Once you begin the pairing procedure, be sure to move at a quick and even pace.
PAIR CODE 1
- Insert a working key into the ignition.
- Turn the ignition from OFF to RUN (without starting the engine) 4 times within 3 seconds, with the 4th time ending in RUN. The door locks will cycle to confirm pairing mode.
- Within 20 seconds, press any button on the first remote. The door locks will cycle to confirm pairing.
- Within 20 seconds press any button on the second remote. The door locks will cycle to confirm pairing.
- Repeat step 4 for any additional remotes.
- Turn the ignition to OFF.
- Test all remotes.
PAIR CODE 2
- Insert a working key into the ignition.
- Turn the ignition from OFF to RUN (without starting the engine) 8 times within 10 seconds, with the 8th time ending in RUN. The door locks will cycle to confirm pairing mode.
- Within 20 seconds, press any button on the first remote. The door locks will cycle to confirm pairing.
- Within 20 seconds, press any button on the second remote. The door locks will cycle to confirm pairing.
- Repeat step 4 for any additional remotes.
- Turn the ignition to OFF. Locks will again cycle to indicate the end of pairing mode.
- Test all remotes.
PAIR CODE 3
- Insert a working key into the ignition.
- Turn the ignition from OFF to RUN without starting the engine) 4 times within 6 seconds.
- Turn the ignition OFF. The system will chime to confirm pairing mode.
- Within 20 seconds, press any button on the first remote. The system will chime once to confirm pairing.
- Within 20 seconds, press any button on the second remote. The system will chime once to confirm pairing.
- Repeat step 5 for any additional remotes.
- Turn ignition to RUN to exit programming mode.
- Test all remotes.
PAIR CODE 4
- Fasten all seat belts and close all doors.
- Insert a working key into the ignition.
- Turn the ignition from OFF to RUN (without starting the engine) 4 times within 6 seconds, with the 4th time ending in RUN.
- Turn the ignition to OFF. An acoustic signal will sound to confirm pairing mode.
- Within 10 seconds, press and hold any button on the first remote. Wait for an acoustic sound and warning lamp to flash (confirming pairing), then release the button.
- Wait 2 seconds, but within 10 seconds, repeat step 5 for any additional remotes.
- To exit pairing mode, turn the ignition to RUN or wait 10 seconds.
- Test all remotes.
PAIR CODE 5
- Insert a working key into the ignition.
- Turn the ignition from OFF to RUN (without starting the engine) 4 times within 6 seconds.
- Turn the ignition OFF. The LED in the clock/trip computer will light up continuously to confirm pairing mode.
- Within 20 seconds, press any button on the first remote. The LED in the clock will flash 4 times to confirm pairing.
- Within 20 seconds, press any button on the second remote. The LED in the clock will flash 4 times to confirm pairing.
- Repeat step 5 for any additional remotes.
- Turn the ignition to RUN. The LED will turn off to indicate end of pairing mode.
- Test all remotes.
FCC REGULATORY STATEMENT
FCC ID: 2AOKM-FD1
47 CFR §15.19(a)(3) THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS. (1) THIS DEVICE MAY NOT
CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE
RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
Note: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
HELP
For help or assistance, please contact technical support at:
888-598-8910.
OTHER KEYS
Visit CarKeysExpress.com to find a variety of award-winning products, like Universal Car Keys, Universal Car Remotes, and OEM keys and remotes.
12101 Sycamore Station Place Ste. 140 Louisville, KY 40299 © 2021 Car Keys Express
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>