Shenzhen Longzhiyuan Technology LY-136 Battery WiFi Video Doorbell User Guide
- June 5, 2024
- Shenzhen Longzhiyuan Technology
Table of Contents
Shenzhen Longzhiyuan Technology LY-136 Battery WiFi Video Doorbell
Product Overview
Our doorbell is a Wi-Fi-enabled Smart Video Doorbell which helps you to see, hear and speak to anyone at your door from your smartphone or tablet from anywhere. This Video Doorbell supports answering ring calls from mobile apps, two-way audio, instant alerts, motion detection and live monitoring.
Product Features
- Two 18650 specification batteries work regularly up to 3-6 months
- FHD Mega pixels collocated with Ide-angle lens
- Support mobile phone remote fast wakeup within 4-7 seconds 2.4G Wi-Fi connection
- High-quality two-way communication with noise cancellation
- Support PlIR motion detection, when someone hovers at the door, it will send push alerts to your mobile phone immediately
- With IR-cut, it can switch automatically and it is clearly visible at both day and night to keep your home and family safe.
Product Specification Sheet
Lens
| DFOV/130° Wide-angle lens (4Glass)
---|---
Infrared LEDs
| 6pcs Infrared LEDs with 5 meters fiash distance
PIR Motion Sensor| 3 meters PIR distance
Storage| Up to 128GB Micro SD card
Connectivity| 802.11b/g/n Wi-Fi@2.4G
Power consumption| Standby 200uA Working 260 mA
Battery| Two 18650 specification batteries
Wi-Fi distance| 80 meters (open space without obstacle)15 meters (indoor)
Limited distance between doorbell and chime indoor|
20~30 meters
Video Compression| H.264
Voice Intercom| Two-way audio with noise cancellation
Video resolution| 1920*1080@15 fps
Notifications| Push Notifications within 5-8 seconds
Device Wakeup| Within 4-7s
---|---
Working Temperature| -10~ 55℃
Storage Temperature| -20~ 60℃
Install your doorbell
A brief introduction of the Doorbell.
Charge LED: Chargingin Red; Full in Green.
Step 1: Open the battery cover.
Step 2: Install 18650 battery and Mirco-SD.
Step 3: Drill four holes in your wall, and install the anchors.
Step 4: FX the doorbell on the wall through fixin9 SCrew hole.
Step 5: Mount doorbell in the direction of the arrow and lock it by the screws at the bottom.
Step 6: Press the Reset button long until you hear the “system reset” prompt from the doorbell speaker.
Indoor chime user manual Volume settings
Press the “volume” button once to trigger one time. There are 4 volume levels
you can choose from low to high.
Change the ring
Step1: Press the “ring” button to choose one you like.
The indoor chime offers 38 different kinds of music for options. Each press
changes the music.
Step2: Press the “volume” button for 5 seconds till the
music changes.
Step3: Press the doorbell button to match the indoor chime. Now, the
music changed.
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference ina residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmfül interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution:
- Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
- This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference,and this device must accept any interference received, including interference that may cause undesired operation.
- The device has been evaluated to meet general RF exposure requirements.
- This equipment should be installed and operated with a minimum distance 20cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>