Atlantic TECHNOLOGY FS-BTWS582 Wireless Headset User Guide

FS-BTWS582 WIRELESS HEADSET
USER GUIDE

343 Vanderbilt Avenue Norwood, MA 02062
Telephone: 781-762-6300 Fax: 781-762-6868

Important Safety Instructions

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET  UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT  EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

The lightning flash with arrowhead symbol within an equilateral triangle. is intended to alert the user to the premise of animated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to occattuti a risk of electric shock to persons.

CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVR (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury 2 from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power- supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15. Grounding or Polarization—This product may be equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.
    Alternate Warnings—This product is equipped with a three-wire grounding-type plug, a plug having a third (grounding) pin. This plug will only fit into a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding-type plug.

16. Ventilation—Slots and openings in the cabinet are provided for ventilation and to ensure rcliable opcration of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation 1s provided  or the manufacturcr’s instructions have been adhered to.

17. The MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.

18. CLASS IT apparatus with double insulation, and no protective earth provided.

19. CAUTION: Danger of explosion if the remote control battery is incorrectly replaced. Replace only with the same or equivalent type.

20. WARNING: The remote control battery (battery or batteries or battery pack) shall not be exposed to excessive heat such as sunshine, fire or the like.

21. No naked flame sources, such as lighted candles, should be placed on the apparatus.

22. This product conforms with standard EN50332. Use careful with the earphone maybe possible excessive sound pressure from earphones and headset can cause hearing loss.

23. The product shall only be connected to a USB interface of version USB2.0
    Please use common USB Cable or original charger, Otherwise, It may result to danger. When you use a charger for charging, adapter shall be installed near the equipment and shall be easily accessible.

24. This product can be used across EU member states.

25. BT frequency range: 2412-2472MHz, Maximum E.I.R.P: 1.93dBm

26. Temperature: -10°C to +45°C

FCC Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interfer- ence that may cause undesired operation.

FCC WARNING
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment gencratcs, uses and can radiate radio frequency cnergy and, if not installed and used in accordance with the instructions, may cause harmful inerference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and the receiver.
3. Connect the equipment into an outlet different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help. Caution:

To comply with the limits for an FCC Class B comput ing device, always use any shielded signal cord supplied with this unit. The Federal Communications Commission warns that changes or modifications of the unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Radio Frequency Interference Statement

• Warning:
  This is a Class B product. In a domestic environment, this product may cause radio interference in which case the user may be required to take adequate measures.

• Qualcomm aptX is a product of Qualcomm Technologies International, Ltd.

• Qualcomm is a trademark of Qualcomm Incorporated, registered in the
  United States and other countries, used with permission. aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and other countries, used with permission.

European Union Information on Disposal for Users of Waste Electrical & Electronic Equipment (private households)

This symbol on the product(s) and/or accompanying documents means that used electrical and electronic products should not be mixed with general household waste. For proper treatment, recovery and recycling, please take this product(s) to designated collection points where it will be accepted free of charge.
Alternatively, in some countries, you may be able to return your products ass to your local retailer upon purchase of an equivalent new product. Disposing of this product correctly will help save valuable resources and prevent any potential negative effects on human health and the environment, which could otherwise arise from inappropriate waste handling. Please contact your local authority for further details of your nearest designated collection point.

Penalties may be applicable for incorrect disposal of this waste, or inaccurate dance with your national legislation.
For business users in the European Union
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.
Information on Disposal in other Countries outside the European Union This symbol is only valid in the European Union. If you wish to discard this product please contact your local authorities or dealer and ask for the correct method of disposal.

The SKAA Compatible Badge found on the Product certifies that this Product has been tested and is fully compliant with all of the requirements of the SKAA Standard and has been granted SKAA Certification. This Product will work seamlessly with other products in the SKAA ecosystem of audio transmitting and receiving devices. For more information on the SKAA Standard, please visit www.SKAA.com. The SKAA® name as well as its associated marks, logos and icons are trademarks or registered trademarks of Eleven Engineering Incorporated.

Introduction

1. SKAA & Bluetooth mode switch
   In the SKAA mode, turn the switch up to “ ” when the SKAA Bond Indicator turns amber or green color, the headset has been set to the SKAA mode. In the Bluetooth mode, turn the switch down to “ ” when the Bluetooth indicator light turns blue, the headset has been set to the Bluetooth mode.

2. Power & Bluetooth Functions
   Turn on the headset by pressing the power button for 3 seconds.
   Turn off the headset by pressing the power button for 3 seconds.
   While the headset Is in the Bluetooth mode:
   Pause/Play by pressing the power button 1 times.
   Skip forward by pressing the power button 2 times.
   Skip backward by pressing the power button 3 times.

3. Charge Indicator
   While the headset is charging, the charging indicator will turn green.
   When fully charged, the charging indicator will turn off automatically.
   The charging indicator will turn red and flash at the same time, if the headset battery is low.

4. Charge Jack
   The USB C charge jack connects via supplied the charging cable to any standard USB-A power source.

5. Headset jack
   Please refer to page 5

6. Microphone

7. Bluetooth Button
   Answer/End call call by pressing the Bluetooth button once
   Press the Bluetooth button for 5 seconds to clear the paired device lists

8. Bluetooth LED
   The Bluetooth LED light indicates the status of headset’s Bluetooth function. When connected to a audio device, the Bluetooth indicator will stay on steady blue. If the indicator is a flashing blue light, it indicates the headset is disconnected from the audio source, and is currently looking for devices to pair.

9. Volume Down Button
   press –

10. Volume Up Button
    press +

11. Bond Botton
    While the headset is in the SKAA mode, the bond button will become functional Detailed functions of the bond button can be viewed at Page 6,7 & 8.

12. Bond Indicator
    Please refer to page

Connecting a Bluetooth Source

1. When you toggle the SKAA/Bluetooth switch down to “ ” the Bluetooth light will turn flashing blue.
2. Connect to “FS-BTWS582’ from your Bluetooth device/Phone.
3. Once connected, you will find the indicator will turn solid blue. your FS-BTWS582 can begin playing the audio received over Bluetooth through the headset you have connected.

Using the Headset jack for Analog Audio Input

When the headset battery is low, it can still be connected via the supplied analog audio cable to an audio source with a 3.5mm audio jack, such as mobile phones, laptops, etc. You can also connect to IOS lighting devices with a optional 3.5mm to Lightning adapter available from 3rd parties.

1. Connect the audio source with the headset using the attached audio cable.
2. When the audio cable is plugged in the headset, the headset will automatically disable the functions for other buttons on the headset. Your FS-BTWS582 can begin playing the audio from your audio source.
   Function| What to do
   ---|---
   Play/Pause| Press once to play/pause
   Answer/End Call| Press once to answer/end a call
   Skip Forward| Double press to skip forward
   Skip Backward| Triple press to skip backward
   Volume Up| Press +
   Volume Down| Press –

Using your headset as a SKAA receiver

The FS-BTWS582 can be used as a SKAA receiver when in SKAA mode. A SKAA receiver receives wireless audio from any SKAA transmitter. For a complete list of SKAA transmitters visit https://shop.atlantictechnology.com/product /FS-BTWS582
Ensure your SKAA transmitter is powered, and that your host device is playing audio. For example, if you are using a smart phone, make sure that your SKAA
transmitter is plugged into your smart phone and that music is playing.
When the headset is in the SKAA mode, the Bond Indicator will display bond status. Your FS-BTWS582 will automatically play from the audio source connected with a SKAA transmitters or other SKAA enabled devices. Other functions for SKAA mode can be accessed via the bond button, such as connecting to additional SKAA devices. Please refer to page 6 &/for additional information.

One SKAA transmitter can serve up to four SKAA receivers.

Essentials

(flash) = Deleted
–| Auto Add SKAA will automatically add the current Amber transmitter to your Green List if you listen to it for 30 minutes| to = Added
1 Click| Green Mode Rotate through your list of favourite transmitters (Green List) — when a favourite transmitter is found, the search stops and audio plays from that transmitter| (dim) = Hunting
(flash) = Next one
(bright) = Bonded
2 Clicks| Amber Mode Explore for new, unknown transmitters (ones which are not already on your Green List)| (dim) = Hunting
(bright) = Bonded

Other Commands

Hunting
(bright) = Bonded
6 Clicks| Factory Reset Clear Green List. Start Over!| (flash) = Reset Done
Hold during power on| Make a Cluster of Receivers: 1.Power off all transmitters and receivers
2. Power on the Master receiver while holding down its Bond Button—hold the button down until the Indicator begins to flash Red
3. With the remaining receivers within 3 meters of the Master receiver, power on the first one, wait for its Indicator to flash Red and then power on the second one; continue until all of them are powered on
4. Once all of the Indicators stop flashing (turn solid Red), power off all of the receivers| (flash) = Receiver has entered ‘Cluster Up’ mode
(bright) = The Cluster has been successfully
made

SKAA cmd

SKAA cmd is an optional App available for iPhone, iPad, iPod, Android, Mac, and PC. You can find it on our website www.skaa.com/tlc/ or in the iOS App store and Google Play. SKAA cmd is great for getting the most out of your FS- BTWS582. To use SKAA cmd, throw your FS-BTWS582 into SKAA mode, download the app, insert a SKAA transmitter and check out all of the customizable features of SKAA. SKAA cmd only works with five specific SKAA transmitters: Izabella, Diz, Ursula, Gemma, and Cassandra. The FS-BTWS582 will not work with SKAA cmd unless you are using one of the supported transmitters.

SKAA CMD

FS-BTWS582 Specifications

Specifictions: Drivers: 50mm Dynamic drivers
Impedance: 32 Ohms
Frequency Response: 20-20K
Sensitivity: 114 dB +/- 4 dB (1 Khz/1 Vrms)
THD: < 0.5 % (1 K Hz )
Bluetooth aptX & SKAA wireless
Over-ear closed-back ergonomic design
In-line microphone /remote control

Hard travel case and Type C charging cable included

The test was performed according to the following European standards:
Draft ETSI EN 301 489-1
V2.2.0(2017-03); Draft ETSI EN 301 489-17 V3.2.0 (2017-03); ETSI EN 301 893 V2.1.1 (2017-05); ETSI EN 300 328 v2.1.1 (2016-11); EN 62311:2008

Safety Comments

The appliance is only suitable for moderate climates.
The maximum ambient temperature during use of the appliance must not exceed 40°C/105°F. Do not drop the appliance or expose it to any other type of impact.
Do not place the appliance in an area exposed to heat, direct sunlight, dampness, moisture, rain, vibration, shock, dust or sand.
Only use a dry brush or cloth to clean the appliance.

Note:
Use this appliance in a temperature range between -20°C and 45°C (-4°F and 113°F).

Symbols Used

Indoor Use Only
Protection class II appliance (ONLY FOR CLASS II EQUIPMENT)
Do not dispose of the appliance along with normal waste. Recycle the appliance. 

Trouble Shooting Guide

The purpose of this guide is to provide answers to frequently asked questions when using FS-BTWS582 products for the first time.

Note: SKAA provides a very simple, one-button, one-LED, interface. These two components are called, and will be referred to as, the Bond Button and the Bond Indicator.
At any time, when interacting with SKAA, the user may locate the Bond Button and rapidly click it six times to reset SKAA to its factory settings. In some cases, it can prove useful to factory-reset a SKAA receiver. If a SKAA transmitter is available and transmitting audio, the factory-reset automatically Bonds to the transmitter and resets the volume.

Bond Button Icon
Before proceeding with reading the following frequently asked questions and answers, please make sure that your SKAA devices are powered, in SKAA-mode (if applicable) and in range of one another (~20 m).

1. When I power on my SKAA speaker, the Indicator is dim green and when I play audio from my SKAA transmitter, no sound comes from the speaker.
   Most likely your SKAA speaker is hunting for one of your favorite transmitters. Simply press the Bond Button once, in order to switch to another favorite transmitter. If no other favorite transmitters are saved on the Green List, pressing the Bond Button once will not have an effect. In this case, double-click the Bond Button in order to put the speaker into Amber Mode. Amber Mode will explore for new, unknown transmitters in the area that are currently playing audio. If the issue persists, you can always factory reset the SKAA receiver by six-clicking the Bond Button. The Bond Indicator will flicker red for one second and the speaker will return to Amber Mode. If six- clicking the Bond Button has no effect, see the next trouble-shooting item.

2. When I power on my SKAA speaker and attempt to play audio from a SKAA transmitter, I hear no sound, the Indicator is dim green and no matter how many times I click the Bond button, nothing changes.
   In this case, your SKAA speaker is a Slave speaker in a Cluster of speakers. This means that this speaker was probably sold with at least one other speaker, and one of these other speakers is the Master speaker. The Master speaker is responsible for controlling all Slave speakers. A Slave speaker will always follow the Master speaker. Some Slave speakers still contain a Bond Button in order to mute the speaker (this can be accomplished by triple- clicking the Bond Button). Any SKAA speaker with a Bond Button on it can be a stand-alone speaker, however it will have to be “unclustered” See the SKAA Receiver User’s Guide for the unclustering procedure.

3. What is the difference between Green Mode and Amber Mode and how do I use them?
   **** 1 Click| Green Mode – Rotate through your list of favourite transmitters (Green List) – when a favourite transmitter is found, the search stops and audio plays from that transmitter| (dim) = Hunting
   (flash) = Next one
   (bright) = Bonded
   ---|---|---
   2 Clicks| Amber Mode – Explore for new, unknown transmitters (ones which are not already on your Green list)| (dim) = Hunting
   (bright) = Bonded)

When you power on a SKAA speaker for the first time, it will be in Amber Mode. You can identify a speaker in Amber Mode by the behavior of its Bond Indicator (if the Bond Indicator is amber, the speaker is in Amber Mode). When in Amber Mode, the speaker will explore for new, unknown transmitters in the area that are currently playing audio. Once found, it will Bond to that transmitter, the Bond Indicator will switch from dim amber to bright amber and the speaker will start playing audio. The speaker is now Bonded and in Amber Mode. Green Mode can be achieved after an SKAA speaker is Bonded and in Amber mode. Once a speaker is Bonded and in Amber Mode, simply hold down the Bond Button for three seconds. The Bond Indicator will switch from bright amber to bright green. Now, the next time you power down your SKAA speaker(s) and transmitter(s) and power them back on again, the SKAA speaker(s) will be waiting for the transmitter on the Green List. When the transmitter becomes available, it will automatically Bond to it. SKAA speakers can store up to ten transmitters on a Green List. To cycle through transmitters on a Green List, simply click the Bond Button once to cycle to the next transmitter on the Green List.

4. How do I know which SKAA compatible receivers work with each other?
   All devices running SKAA OS 2.1 and newer are designed to work together seamlessly.
   If you suspect that your SKAA transmitter or receiver is running firmware older than SKAA OS 2.1, contact us via support@skaa.com and we will help you.

Care and Maintenance

Your headset may require periodic cleaning.

• Wipe down your FS-BTWS582 after each use .
• Wipe the outside surfaces with a soft , dry cloth .
• Always store your FS-BTWS582 in the provided case.
• Avoid strong impacts to your FS-BTWS582.
• Don’t allow moisture to get inside the earcups or the audio input connector.
• Do not expose your FS-BTWS582 to temperature extremes.
• Never immerse FS-BTWS582 in water.

Please Note:

• Moisture in your FS-BTWS582 can cause temporary performance issues.
• Do not wear your FS-BTWS582 if your ears are wet . Always dry your ears completely before wearing your FS-BTWS582.
• Should you inadvertently allow water or perspiration into the FS-BTWS582 and they quit working , allow to dry completely before attempting to use again.
• Minor moisture build-up should dry out and not affect long-term performance. Extended exposure to moisture or submersion will result in permanent damage (not covered by the warranty).
• Please read this important information before using your FS-BTWS582.
• If everything sounds muffled or you hear ringing or buzzing after using your FS-BTWS582, your ears are trying to give you a warning!
• These are symptoms normally associated with a condition known as Temporary Threshold Shift and are an indication of conditions that could lead to permanent hearing loss.
• While no two individuals’ hearing sensitivity is exactly the same, there are established safety guidelines for sound levels versus time of exposure.
• The chart (see below) is based on OSHA’s (Occupational Safety and Health Administration) exposure information for industry. Remember that these guidelines are based on average hearing sensitivity. Your sensitivity may beabove or below these levels.
• The use of any FS-BTWS582 off ear benefits and risks. FS-BTWS582 can lower ambient sound levels approximately 25dB when properly worn. However, the performance capabilities of the FS- BTWS582 can allow the user to negate the benefits of hearing protection from ambient sound.

dB Level| MAXIMUM
Exposure Time| dB Level| MAXIMUM
Exposure Time| dB Level| MAXIMUM
Exposure Time
---|---|---|---|---|---
85| 8hr| 95| 2hr| 105| 30mins
90| 4hr| 100| lhr| 110| 15mins

** Always pay attention to the surroundings while you use the headset and personal hearing protection is your responsibility!

Limited Product Warranty

Atlantic Technology warrants this product to be free of defects in materialor workmanship for a period of one (1) year from the date of original retail purchase. This warranty is available only to the original purchaser, and only if purchased from an authorized Atlantic Technology distributor or reseller. If your product is found to be defective during the warranty period, Atlantic Technology will, at its sole option, either repair the product or replace the product with a new or factory reconditioned or substantially equivalent model. This limited warranty does not apply to loss, theft, or any defects attributable to damage beyond the reasonable control of Atlantic Technology including damage caused by abuse, misuse, misapplication or modifications performed by anyone other than Atlantic Technology. This warranty applies only to the external shell of the product, the internal components and cable. The carrying case, cleaning tool, any adapters and other included accessories are warranted for 30 days. Earcups are not covered by the warranty.

Repair/Replacement Warranty

This Limited Warranty shall apply to any repair, replacement part or replacement product for the remainder of the original warranty period or for thirty (30) days, whichever period of time is greater. Any parts or product replaced under warranty will become the property of Atlantic Technology

Requesting Warranty Support

If your product is not functioning properly, first ensure that the ear canal is not blocked by earwax and that the unit is completely dry. Performing these simple troubleshooting steps could solve the problem and eliminate the need for factory service. Valid warranty claims are generally processed through the period of purchase during the first thirty (30) days after retail purchase.

United States & Canada

If it is necessary to return your product to Atlantic Technology for warranty or post-warranty service, contact us to request a return merchandise authorization (RMA) number. You may call 1-781- 762-6300 or go to customer support. Please note you will be required to submit reasonable proof of purchase date, ownership, and that the product was purchased from an authorized Atlantic Technology retailer. Once you receive your RMA number, package the product securely to prevent damage in transit, include the documentation, and send prepaid and insured through a trackable shipping carrier.
Atlantic Technology will be responsible for shipping to the consumer after warranty repair/ replacement only. The customer is responsible for all shipping/handling charges related to returning the product to Atlantic Technology.
The warranty on this product if it is sold to a consumer outside of the United States and Canada shall comply with applicable law. To obtain warranty service, contact the dealer from which you purchased or the distributor that supplied this product. Additional charges and limitations may apply.

International

If purchased through an authorized Atlantic Technology retailer, but not through the local distributor or distributor’s network, contact Atlantic Technology directly. If purchased in an international location without a Atlantic Technology distributor, contact Atlantic Technology directly.

Register Online Today Complete your registration card online at: https:// www.atlantictechnology.com/register- warranty/

Limitation of Liability

Atlantic Technology disclaims any and all implied warranties, warranties of merchantability and fitness for a particular purpose to the maximum extent permissible by law. Atlantic Technology shall not be liable for any special, incidental or consequential damages caused by the use, misuse, or inability to use this product. If purchased under a government contract, those contract terms supersede terms stated herein. In some locations, implied warranties cannot be limited. Under certain conditions, these limitations or exclusions may therefore not apply to you. This warranty replaces all other warranties for this product.

Important Information

Noise-induced hearing loss is preventable but often undetected until it is too late. Atlantic Technology and the Electronic Industries Association’s Consumer Electronics Group recommend you avoid prolonged exposure to excessive noise. Used responsibly, your FS- BTWS582 can help prevent noise-induced hearing loss. If you have questions, contact your audiologist or hearing care professional.

Be sure to observe the following guidelines:

• Do not turn up the volume so high that you can’t hear what’s around you.
• You should use extreme caution or temporarily discontinue use in potentially hazardous situations.
• Do not use while operating a motorized vehicle as it may create a trafic hazard and is illegal in many areas.
  If you would like more information or would like to purchase other Atlantic Technology products and accessories, please call 781- 762-6300 or visit us at https://www.atlantictechnology.com

343 Vanderbilt Avenue Norwood, MA 02062
Telephone: 781-762-6300 Fax: 781-762-6868
015-0013

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>