XOSS VORTEX Bike Cycling ANT Wireless Compatible Speed Sensor User Manual
- June 5, 2024
- XOSS
Table of Contents
XOSS VORTEX Bike Cycling ANT Wireless Compatible Speed SensorProduct
Introducíton
Thank you for choosing xOSS VORTEX By installing it correctly on the left crank or front hub position, it can accurately measure the cadence or speed data, and support standard ANT+ and Bluetooth protocols. Connecting to APP Cycling8 computer or other devices that support Bluetooth and ANT+ protocols can help you Cary out scientific riding training
Product Accessories
- xOSS vORTEX x1
- Rubber Mat(flat, curved) x2
- Rubber Band large, small X1
- CR2032 Battery Installed) X1
- User Manual x1
Quick Setup
Note
Remove the insulation sheet before use
- Tist the bey doerwtha
- Tie cut the
- Goethe later dow are citation, spe te Inan the ag he araw
XOSS VORTEX USe CR2032 battery, if you need to replace the battery, please refer to the above steps.
Download APP
XOSS VORTEX has two working modes: speed and cadence, you can switch modes by xOSS APP. Scan the QR code on the right to download the XOSS APP.
SPEED/CADENCE MODE switch
Aher ceectrg te the X055 AP, you ca another medes, check the battery cowl. and upgsle the immense
After the product successfully switches the mode, it will flash the LED to indicate the operating mode.
Installation
Note
The rubbering and nbéber pad can be selected accand ng as the actual stusan
SPEED MODE
Buckle the curved rubber mat onto the back of the sensor, then bind the sensor with the large rubber band onto the wheel axle.
CADENCE MODE
Buckle the flat rubber mat onto the back of the sense the pedal crank.
then bind the sensor with the small rubber band onts on Mees take necessary ets o atlases cesmuhethe their before been te cor as e
Product Specification
- Battery: CR2032
- Sensor size: 40 x 30x 10.7 mm
- Sensor weight: 10g
- Battery life: over 300hour
- Waterproof grade: 1P67
- Working temperature: -20’C-50’C
- Wireless: ANT+, Bluetooth
WARRANTY
Thank you for purchasing our product han an ane-war iron warranty from the date of purchase, contact your original dealer or warranty service. The following conditions are not covered by the warranty:
- The normal. aging las of the battery
- Damage and Xoss of products due o improper installation
- Damage caused by abnormal such as high-temperature water damage tc.
- Damage caused by dismantling youselforby unauthorised maintenance personnel Shanghai
Dabuncuo nomination and Technology Co, Ltd Roo 602 East Tower 6fMGZHE OMce No B00 Gus Shun East Road, Huangpu District, Shanghai China Ary questions or more information, please contact us vi suppar1@scsi.co Vsk ur website for more products woGs.c a mid-on, to top