ADJ 710-00091 Switch 4-8 Ports POE +2 Uplink Ports User Manual

June 10, 2024
ADJ

ADJ 710-00091 Switch 4-8 Ports POE +2 Uplink Ports

ADJ-710-00091-Switch-4-8-Ports-POE +2-Uplink-Ports-FIG-
\(2\)

PoE Switch Connection Schematic Diagram

Take the standard 4+2 Ports /8+2 Ports PoE switch as in these examples:ADJ-710-00091-Switch-4-8-Ports-POE +2-Uplink-Ports-FIG-
\(3\)

Product Features

  1. Supply power to devices that support PoE
  2. Support IEEE802.3AF/AT Protocol
  3. Each port Output Max.30WV
  4. Support 250m Transmission Distance
  5. Support Vlan

POE Front Panel Sticker

Switch 4+2 Ports PoEADJ-710-00091-Switch-4-8-Ports-POE +2-Uplink-Ports-
FIG- \(4\)

Switch 8+2 Ports PoEADJ-710-00091-Switch-4-8-Ports-POE +2-Uplink-Ports-
FIG- \(5\)

Warranty

  • This product is guaranteed against any manufacturing defect, as defined on the D.Lgs.
  • February 2, 2002, No 24. In case of failure, please contact the retailer where you purchased it,
  • You can be found at www.adj.it for the guarantee of a standard.
  • Please use the product only for the purpose for which it was designed. It is forbidden any other use or modification.

This product complies with the following directives:

  • DIRECTIVE 2014/30/EU on the harmonization of the laws of the Member
  • States relating to electromagnetic compatibility;
  • DIRECTIVE 2014/35/EU on the harmonization of the laws of the Member
  • States relating to the making available on the market of electrical equipment designed for use within certain voltage limits;
  • DIRECTIVE 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
  • The declaration of conformity for this product is visible on www.adj.it site, on the product page.

SPECIFICATION

ADJ-710-00091-Switch-4-8-Ports-POE +2-Uplink-Ports-FIG-
\(6\) ADJ-710-00091-Switch-4-8-Ports-POE +2-Uplink-Ports-FIG-
\(7\)

The symbol of the crossed-out trash indicates that the product, at the end of its useful life, must be treated separately from domestic waste and must be taken to a recycling center for electrical and electronic equipment or delivered to the seller when buying a replacement. The separate waste collection contributes to preventing possible adverse effects on the environment and health and promotes the recovery of materials it is made. You are responsible for assigning the equipment in question to the appropriate waste disposal center. For more detailed information contact your local waste disposal service or the shop where it was purchased. Anyone who does not carry the product in a recycling center for electrical and electronic waste shall be punished with an administrative penalty provided by law for the illegal disposal of waste.

Additional compliance information:
To obtain additional information about the compliance, go to ADJ website: www.adj.it/certification or contact ADJ Customer Support at the following e-mail address: supporto@adj.it
Made in China – Imported and distributed by lot Tecnologie s.r.l.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals