RYOBI RYRM8001 80V HP Brushless 30 Inch Lithium Electric Zero Turn Riding Mower User Guide
- June 5, 2024
- RYOBI
Table of Contents
RYOBI RYRM8001 80V HP Brushless 30 Inch Lithium Electric Zero Turn,
Riding Mower
WARNING:
This Quick Start Guide is not a substitute for reading and following the operator’s manual. To reduce the risk of death or serious injury, user must read and understand the operator’s manual before using this product.
Operating the Mower
-
Test the safety interlock system.
-
Adjust the seat to the desired position.
-
Verify the battery charge level by pressing the mode button on the LCD Screen. Charge if needed.
-
Raise the mower deck to its highest position.
-
Make sure the joystick is in a locked, neutral position.
-
See page 18 in the operator’s manual
-
Insert the start key and turn to the ON position.
-
Release the parking brake.
-
Drive to desired mowing location. For detailed driving instructions, see page 18 in the operator’s manual.
-
Stop the mower, place the joystick in the locked, neutral position, and set the parking brake.
-
Lower cutting deck to the desired position.
-
Turn the start key to the ON position, raise the joystick from the locked, neutral position, and release the parking brake.
-
Raise blade engage knob to activate blades and mow as desired.
When Finished: -
Stop the mower on a flat, level surface.
-
Push blade engages knob down to turn blades off.
-
Place the joystick in a locked, neutral position.
-
Set parking brake.
-
Turn the key off.
Go to www.ryobitools.com and register your new
tool online.
For any questions about operating or maintaining your product, call the RYOBI
Help Line! Your product has been fully tested prior to shipment to ensure your
complete satisfaction. Troubleshooting tips are also available in your
operator’s manual.