ONTA D2-001 Intelligent Vacuum Cleaner Instructions

ONTA D2-001 Intelligent Vacuum Cleaner

Operation Instructions

• The content of user manual has been checked carefully.
• Please contact us as soon as possible if there are any printing errors or misunderstandings.

Safety Precautions

General Principles of Safety

Not to be used by children under the age of 8. People with physical or sensory impairments, and some adults with developmental disabilities, along with people who have no relevant experience may use this product under proper supervision and guidance of those who understand the inherent risks
Warning: Do not touch the electronic components, batteries or charging stands of the robot. Users are not allowed to maintain the internal components of the product.
Production maintenance needs authorized maintenance personnel to operate. Please make sure that the rated power supply voltage of the charging stand meets the standard plug voltage.

Safety Instructions

• Before operating the robot, please read all the safety precautions and operation instructions.
• Please pay attention to all warnings on the battery, power adapter, robot and user instructions.
• Please follow all operating and operation instructions.
• The harm caused by wrong operation and the degree of damage are described as follows.

Product Safety Issues

Warning

This product is limited to the original battery charging stand and adapter, otherwise it may cause product damage, electric shock or fire caused by high voltage. Before use, please place the rechargeable seat on the wall, and do not pl ace any articles within 2 meters in front and 1 meter in left and right.
Please do not use this product if the main engine and accessories are damaged. Contact our after-sales service department. No one is allowed to dismantle, repair or modify the product except the maintenance technicians designated or authorized by the company.
Do not touch the power plug or product when the hand is wet, otherwise electric shock may be caused.
Do not use the product in no protective fence situation , in order to avoid accidental falling of vacuum cleaner and then person injury.
Do not use the power cord to drag or move the product. Do not over twist, bend or place heavy objects on the power cord.
Do not let the product close to the fire source or the inflammable, explosive and corrosive materials.
Keep away from direct heat, and any corrosive or explosive materials

Warning

• Indoor use only

• Do not sue for spilled liquids

• Before use make use extra cording is contained and kept clear of vacuum operation to avoid any interference
  

• Please remove all vulnerable items before use.

• Do not hold the front shell to lift the vacuum cleaner. Please use both hands to hold the machine body to lift the vacuum cleaner.

• It is forbidden to use non-original adapter and charging stand to charge the machine, so as to avoid damage to the machine.

About the Safety of Children

• Children are not allowed to use this product alone.
• Children are not allowed to play with the packaging bag of the product, otherwise it may cause suffocation.

About Batteries

1. This product is only suitable for the original battery provided by the manufacturer;
2. The battery must be taken out when the product is discarded;
3. If you need to replace the host battery, please contact our after-sales service department. If you replace the battery with the wrong model, it may lead to safety accidents;
4. In case of battery leakage, if the liquid sticks to the skin or clothes, wipe it with dry cloth immediately. The discarded batteries shall be sent to the recycling station or designated maintenance point, and shall not be discarded.

Product Composition

Package List

Warm Reminder

1. Battery has bult-in the machine
2. Filter has been installed on dust box

Main Engine Diagram

1. WiFi indicator light (connected to high configuration version of mobile app)
2. Start & Pause Button (start or pause)

Host Diagram

Diagram of Charging Stand

Dust Box Installation

• Take out: hold the handle by hand and pull it out.Put in: Put the dust box back and make sure it was flat

Note: To keep vacuum the most efficient, clean dust box filter after each use, filter buildup will affect vacuum performance.

Cleaning and Brushes

• Use the cleaning brush to clean the Debris on the side brushes. If there is more hair on the side brush, you can use scissors to carefully cut the hair, and then clean it.

1. Installation Steps: Brush align the hole position, and hard press it down till hear the “snap” sound, indicating that the side brush is installed .
2. Uninstallation Steps: Grasp the brush at any both ends of the brushes and pull it out with the slight force.

Warm Tips:
Before using the device, please to check if the side Brushes has been installed, otherwise it can not work.

Use of Products

Note: Before,use Please to remove the protective bolt and tidy up the small objects or obstacles in the room, especially the wires and other entanglements which need to be cleaned.

Application Scope of the Product

Scope of Inapplicability

It is not suitable for use in extremely hot (+ 60 ℃) or extremelycold (- 5 ℃) environment.
This product is only suitable for indoors.
It can not be used in the places without protective fence to avoid personal injury caused by accidental fall of the product.
Do not use in humid or flammable, explosive and corrosive environments.
Do not allow the product to absorb cigarette butts or matches that have not been extinguished.
It can’t be used to absorb toner and color pan used in laser printer and copier. These substances can cause fire.
Do not use to absorb sharp objects, such as glass, nails, etc., to avoid product damage.
Do not use for carpet with thickness greater than 12mm, in order to avoid machine jamming.

Machine Working Mode

On /Off

When the machine is in the “off”mode, press and hold “auto” button 3seconds. The buzzer alarms one time, the three LEDs flash at the same time, and it enters standby mode after 3seconds, LEDs stop flash and keep on.

Standby Mode
When the machine is in standby mode, There are 6 different operation to next step:

1. If the machine is not operated, it will automatically shut down after 5 minutes.
2. Press the button, the buzzer will alarm once and the machine will enter the automatic cleaning mode.
3. Press the button, the buzzer will alarm once and the machine will enter the automatic fixed-point cleaning mode.
4. Press the button, the buzzer will alarm once and the machine will enter the automatic recharge mode.
5. Press the button for 3 seconds, the buzzer will alarm twice and the machine will shut down.
6. Plug in the charger, the buzzer will alarm once and the light flashes, the machine will enter the direct charging mode.

Automatic Cleaning Mode
When the machine is in automatic cleaning mode,, the automatic cleaning LED light is on. The mode is for all the room cleaning. The machine works according to the internal cleaning path, and it avoids obstacles and steps.There are 4 steps can change it work status:

1. Press the automatic or fixed-point button on the machine, the buzzer will alarm once， and the machine will enter the standby mode.
2. If the battery power is low, the buzzer alarms 3 times， then the machine will enter the automatic recharge mode.
3. f machine get the trouble, the buzzer will alarm and lights flash es then enters the error mode.
4. If the charger is inserted, the buzzer will alarm once and the machine will enter the charging mode.

Fixed Point Cleaning Mode
When the machine is in the fixed-point cleaning mode, the fixed-point LED light is on, and it be recharged after three minutes leaning , which is suitable for cleaning small-scale areas.here are 2 steps can change its work status.

1. Press the automatic or fixed-point button on the machine, the buzzer will alarm once, and the machine will enter into the standby mode.
2. if machine get the trouble, the buzzer will alarms and lights flash es, then enters the error mode.

Automatic Recharge
Automatically go back charging stand to recharge when power is lower than 20 percent When the machine is in charging mode , the LED light of automatic cleaning mode flashes,indicating that it is charging, and the light stop to flash and keep on when the machine is fully charged.

When the machine is in this model,There are 3 optional back to auo cleaning mode after full charged: Press the Auto button on the machine, “A ” button on the remote o “auto” icon on the phone app.

Troubleshooting
In the trouble situation, machine will stop working, Auto Cleaning light, Fixed Port Cleaning light will on simultaneously, and buzzer will alarm, the machine will be off if have not any manual operation. Different troubles as belows:

Charging Operation

Charging Stand Placement

For optimal operation, we strongly suggest the base is,

1. on stable footing up against the wall.
2. the path to the base must be clear of all objects as not to infringe it’s path.
3. place no furniture, or other objects one meter to both the right and the left of the base.

Manual Charging

Connect the power adapter directly to the machine and connect the other side to the power supply.

1. When charging for the first time, please charge for 12 hours.
2. During daily use, please store the machine on the charging stand and ensure that the charging stand is connected to the power supply.
3. If you do not use the machine for a long time, please fully charge the machine, turn off the machine and store it in a ventilated and dry place.

Product Maintenance

Cleaning Side Brushes

Clean the side brush when it becomes dirty, If it is damaged, it can be replaced.

1. Cleaning Brush
   Remove the side brush and wipe with a clean cloth. Clean the universal wheel to reduce hair entanglement.
   

2. Clean the Universal Wheel

Cleaning of Dust Box and Filter Parts

Remove the filter parts,Not wash the HEPA with water, and remove the dust with a slight taps.

Wash the dust box under running water and dry the dust box and filter parts

Cleaning of Anti- Drop Sensor and Charging Electrode

Gently wipe the sensor and electrode piece with soft cloth.

‘Reminder: Please remember to check the base for any lint or debris. Any buildup will. prevent the unit from charging successfully or whatever the case maybe

Specifications

Working Voltage    7.4V
Rated Power        25W
Rechargeable Battery Lithium B attery
Battery Capacity        4400mAh
Charging Time      About 4~5 Hours
Working Hours    ≥90 mins
Operating Temperature Range  -10℃~45℃
Operating Humidity Range    ≤90%RH
Capacity of Dust Collection Box  600ML
Dimensions (L x W x H)    32032078mm

Dry Mop Instructions

A. Back up the machine
B. Remove protective sticker to reveal the adhesive side of the Velcro

A. Adhere the two Velro on the position showed in figure
B. Keep the Velcro and the position free from dust and water stain.

A. Adhere mo cloth as showed in the figure
B. It can be reused after washing mop cloth

A. Note: Always wring out the mop slightly after wetting it with water, then stick it on the back of the machine to avoid excessive water stains.

Remote Instructions

Remote Diagram

Troubleshooting

The following are the causes of the faults.

Warm Reminder

• If the unit will not be used for an extended period of time, please remove and store the battery in a cool location with low humidity
• In case of battery leakage, remove batteries, wipe the unit’s battery compartment, and wash your hands.
• Do not allow water to enter the remote control. Do not use it in humid environment for a long time.

WiFi Connection Instructions

1. Scan below QR code or downloap App: TuyaSmart from Apple store and Play store.

2. Register account and login.

3. Enter the interface.

4. Now long press the “Auto” button, the LED will flash and then stay on, and the robot will enter the standby state.

5. Two ways can be optional, here we take “Auto scan” as an example.

6. Select the 2.4GHz WIFI Network and enter password, then Click Next icon.

7. WiFi connection is in progress.
   When the mobile phone displays add ed successfully, click “Done ” to enter the operation interface.

8. WiFi interface Diagram.

9. Schedule Function
   The Schedule function is similar to the alarm clock on the phone. After setting the cleaning time, the machine will automatically enter the automatic cleaning mode at the setting time as long as the robot is in standby or charging on the recharging stand.

A. Click “Settings” to enter the timing interface (as shown in Figure 1.2).
B. Click the time you want to set, such as 15:47, which can be repeated one or more times. Select the working mode of appointment and save it (as shown in Figure 3).
C. Click saving button in the upper right corner (as shown in Figure 3).
D. If you need to cancel the setting time, click the switch on the right. If it disappears, the appointment of the day will be canceled.
E. When the machine reaches the setting time, it will run automatically.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>