beflo Tenon Main Board Box Instruction Manual
- June 3, 2024
- beflo
Table of Contents
beflo Tenon Main Board Box Instruction Manual
Modification History
NO
| Date| Reviser(s)| Changed pages| Author(s)| Approved| Comments
---|---|---|---|---|---|---
01| 2022/07/27| 1.0| NA| Chris Li| Chris Li| Creation
Introduction
Scope
This document is the Product Specification Document for the Nonet beflo Main Board Box – referred to as the“product” in this document. The Main Board Box is a function control box with WiFi 6, Bluetooth 5.0, one USB Type-A (Charging), one USB Type-C (Charging), one 3.5mm Audio Jack and a Capacitive touch OLED Display
Confidentiality
The information in that document is part of the knowledge of Nonet Inc. (referred to as “Nonet” in this document). It must be considered confidential. All users of this document are responsible for taking all precautions so that this document is never read by any unauthorized user.
Features
Firmware
- Adjustment Range, Home height range: 750mm-1190mm
- Controller: Controlled by APP with Bluetooth connection, also can be controlled by touch panel with OLED.
- Cloud: Data collected, bugs and errors reported, and release the latest version for updating.
- Connectivity features: Bluetooth for usage with smartphone app/ sedentary reminder condition.
List of mandatory components
Nonet defines a list of main components that must be used by the hardware design
Input power
Support Input AC Rated Voltage with full range from 100-240V, 50-60Hz Rated Input Voltag
WiFi 6
- IEEE 802.11 1T1R a/b/g/n/ac/ax 5GHz and 2.4GHz
- Support uplink and downlink MU-OFDMA
- Supports 1×1 20MHz bandwidth, MCS0~8 in 2.4G/5GHz band
Bluetooth 5.0
Low Energy, transform long-distance, data transfer 2Mbps.
USB Type-C
Type-C port allows to charge (5V/3A 15W)
USB Type-A
Type-A port allows to charge (5V/2A 10W)
3.5mm Audio Aux
Support One 3.5 microphone/stereo headphone jack for speakers and headsets
Capacitive touch OLED display
- The display is 3.12″ OLED panel in white color and resolution of 256 x 64 dots, refresh rate 105Hz.
- The touch is capacitive type and support single point touch.
- The front cover is made by translucent black glass with hardness up to 7H and added surface treatment including anti-glare and antifingerprint.
Mechanical requirement
Cosmetic and quality standards for injection molded plastic parts
Surface quality
The surface quality of Tenon shall be compliant to beflo outline drawing, applied to each surface and feature based upon its cosmetic classification.
Surface Area Definitions
Physical specifications
Overall dimensions
- Size：281.32mm (L) x 184.16mm (W) x 72.98mm(H)
- Weight：447 ± 10 g
Explode drawing
Six viewer drawing
Packaging specification
Carton specifications
Each layer of the carton can put 5 samples, there are two layers in total
Carton label & printing sample
Standards
RoHS, UL, FCC, and BSMI are certified as minimum requirements. If any certificate is mandatory but not listed here, please list them and have Nonet Marketing and Engineering teams noticed and approved.
Mechanical environment tests
Test Description
- Storage (Non-Operational)
Test Conditions, Limits, References
-
Phase 1: Hot
Condition: +65 °C, uncontrolled RH
Ramp: 1 Hour Up, 72 Hours Dwell, 1 Hour Down
Number of Cycles: 1 -
Phase 2: Hot/Humid
Condition: +40 °C, 90% RH
Ramp: 1 Hour Up, 72 Hours Dwell, 1 Hour Down
Number of Cycles: 1 -
Phase 3: Cold
Condition: -40 °C, uncontrolled RH
Ramp: 1 Hour Down, 72 Hours Dwell, 1 Hour Up
Number of Cycles: 1 -
Test duration (reference): Approximately 222 Hours
Acceptance Criteria
- After test completion, the unit must pass all functional tests.
- note and photograph (with SN) any cosmetic damage to the unit enclosure.
- After the test, there shall be no obvious color change on the test samples (Cases, Ethernet Jacks, etc.)
Sample quantity
- 1 carton
Reliability and lifetime
Warranty issue: 3years.
FCC
Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions. 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. “This equipment has been tested and found to comply with the limits for a Class B digital device. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.” The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be located or operating in conjunction with any other antenna or transmitter.