GOODSSY Volume N1 Steam Straightener and Curling Iron Instruction Manual
- June 5, 2024
- GOODSSY
Table of Contents
GOODSSY Volume N1 Steam Straightener and Curling Iron
IMPORTANT SAFETY INSTRUCTIONS
- Keep out of reach of children. Children should not play with the appliance. Cleaning and user maintenance must not be carried out by children unsupervised. 2). If the mains cable is damaged, it must be replaced by the manufacturer, his service agent or similarly qualified persons in order to avoid danger.
- WARNING: Do not use this appliance near bathtubs, showers, washbasins or other receptacles containing water.
- Always unplug this apparatus immediately after use.
- Only use this device as intended, as described in this manual. Do not use any accessories not recommended by the manufacturer.
- Never use this appliance if the cord or plug is damaged, if it is not working properly, or if the Steampod has fallen into the water.
- Keep the cable away from heated surfaces. Do not wrap the cable around the appliance.
- Never drop or insert any object into an opening.
- Do not use an extension cord with this appliance.
- Never direct heat into the eyes or other sensitive areas.
- Attachments may be hot during use. Allow them to cool before handling.
- Do not place the appliance on a surface while it is switched on.
- Do not use with a voltage converter.
SAFETY WARNING
TO PREVENT DAMAGE TO YOU, OTHERS AND PROPERTY, MAKE SURE YOU COMPLY WITH THE
FOLLOWING ARTICLES:
WARNING The following warnings alert you to situations that may cause
serious injury or death to people. 
PLEASE NOTE THAT THE FOLLOWING ICONS HAVE THIS MEANING
This icon requires attentiveness. Whenever specific items are prohibited, this
is indicated by the following icon.
Attention is required with this icon. Whenever specific items are prohibited,
this is indicated by the following icon.
WARNING
- Do not damage power cable and plug to prevent electric shock, short circuit and fire.
- When not in use, remove the plug from the socket.
- When in use, insert the plug into the socket.
- Please use the amperage recommended for this product.
- Do not place in damp, rainy areas. This will prevent electrical shocks, fire, faults and deformation of the product.
- Remove residual water from the water tank after each use, before placing it back in the straightener.
PRODUCT STRUCTURE
- A. Steam outlet
- B. Hairbrush
- C. Protection brush
- D. Smart Display
- E. Temperature Down [-]
- F. ON/OFF Button
- G. Temperature up [+]
- H. Steam switch
- I. 360-degree rotatable power cable
- J. Water tank
- K. Card slot for water tank
- L. Nozzle to refill water
PRODUCT SPECIFICATIONS
| | |
---|---|---|---
Model| YW017| Product gewicht| 0.68 kg (inclusive tank)
Voltage| AC100 – 240 V 50/60Hz| Water tank capaciteit| 40 ml
Vermogen| 85W| Stoom generatie capaciteit| 5 g /min
Product grootte| 318x55x54 MM| Bijvulfles water| 40 ml
Land van oorsprong| CHINA
BEFORE USING
-
Hold down the water storage tank and remove as shown below (dismantle the water storage tank as shown below)
-
Open the PVC cover of the water storage tank and fill the tank with water, which should be pure water as it contains less minerals.
(Do not fill the water tank with lotion, cosmetics, incense oil, solids and other items that will cause damage to the product) -
(The water tank and water bottle must be filled with water as shown below) Reassemble the water tank
Check the direction of the tank and push the tank horizontally into the card slot of the tank until you hear a clicking sound. Make sure that the water tank is correctly mounted without being loose.
(Make sure the card slot of the water tank is dry without water. Make sure the tank is dry without water when putting it back in the device (the figure below compares the device with a dry tank and the device with a wet tank)
Important notice: Every time after filling and before use, keep the straightener folded until steam comes out of the steam valve. This will take approximately 10 seconds.
HOW TO USE
-
Plug in and hold the power button to start the straightener. The LCD screen will start automatically.
-
Select the appropriate temperature for your hair.
The default start-up temperature when using the product for the first time is 190 degrees Celsius; the default start-up temperature for subsequent use is the temperature set during the last use of the device when the plug was unplugged. -
When the steam straightener is connected to the power supply, “OFF” is shown in the display and the buzzer beeps once to indicate that it is connected to the power supply.
-
Press and hold the on-off button ” ” for 3 seconds to start preheating the straightener. When the temperature reaches the set temperature, it will beep twice. (Steam symbol. When the heat bar flashes, it means that the temperature is rising. When the heat bar is on steady, it means that the desired temperature has been reached)
-
5 seconds after you have set the desired temperature, the safety lock ” ” will automatically activate (a lock symbol will appear on the display). This function will prevent you from accidentally changing the temperature by pressing a button.
-
If you wish to change the temperature of the iron, you must unlock it first. Press and hold any button for 3 seconds and the lock symbol will disappear from the screen, allowing you to adjust the temperature again.
-
Depending on the quality of your hair, choose an appropriate temperature model: 150°C, 170°C, 190°C, 210°C, 230°C as shown below
| | | |
---|---|---|---|---
For damaged hair| For soft hair| for medium hair| For rough hair| For very hard hair -
When using the steam straightener for the first time, keep it closed until steam comes out of the steam outlet. This may take approximately 10 seconds.
-
When using the steam straightener to style your hair, clip the hair and gently move the device from the roots to the ends.
Then the steam particles from the straightener are evenly distributed throughout your hair, giving your hair extra moisture. It should be used as shown in the figure below. -
Hair care products can be used in addition for a better effect.
-
If the appliance is not used for 20 minutes, it will automatically switch to energy-saving mode and lower the temperature to 150°C. When the straightener is closed, the temperature will increase rapidly to the set temperature. If the appliance has not been used for one hour, it will switch off automatically.
-
The steam straightener remains hot for a while after use. Do not store it until 10 minutes after use when it has cooled down.
CLEANING AND MAINTENANCE
To keep the appliance clean, clean it after each use.
- Switch off and unplug the appliance. Then leave it for 10 minutes until the appliance has cooled down.
- Use the cloth to remove residue from the straightener.
- Disconnect and empty the water tank.
- Use a dry cloth to wipe water off the straightener to keep it dry.
- You can disassemble the comb and clean it with detergent and reassemble it when it is dry. (Disassemble and reassemble the comb as shown below)
- If the unit is not used for a long time, dry the whole unit, dismantle the water tank and remove the remaining water in the water tank and put it away when it is completely dry.
- Keep it far away from fire, direct sunlight and from the bathroom or other damp places. Store the unit in a cool, dry and ventilated place.
- Keep out of reach of children.
FAQ
Problems that may occur during use
Defect| Reason| Solution
Turned off and no display on the screen| The power cable has been pulled out|
Reinsert the power cable
The screen displays ERR| Abnormal| Send the product to the service center
The steam symbol continues to flash| The heating element of the power
generator is defective| Send the product to the service center
The temperature increase symbol continues to blink| |
No steam comes out of the straightener
| No or too little water in the tank|
The water tank is not properly mounted|
The water is pumping but no steam is coming out| Keep the straightener closed
for 10 seconds
Steam is not visible in a very humid environment| This is not a malfunction of
the straightener
The amount of steam has been changed| This is due to the wind| This is not a
malfunction of the straightener
A squeaking sound is made when the hair is pulled| This is the sound of the
pump| This is not a malfunction of the straightener
There is a bubbling sound when the hair is pulled| This noise is caused by the
creation of steam (the water boils)| This is not a malfunction of the
straightener
The frame is hot| Normal use of the appliance will cause it to heat up| This
is not a malfunction of the straightener
WARRANTY
Responsibility for the environment
Some parts of the straightener can be recycled.
- To make use of the guarantee service, you must be able to present valid proof of purchase.
- The guarantee service does not cover damage caused by improper use, negligence, non-compliance with the instructions for use of the steam straightener, failure to use the voltage or current specified by the product, or repair by yourself or an unauthorized party.
- Maintenance service does not include repair or replacement for normal wear and tear and use as well as the following:
- improper use of water;
- any fault caused by a special additive not supplied by our company in the injected water;
- damage caused by excessive voltage or frequency error;
- accidents such as fire, flood and electric shock;
- damage caused by unauthorized modification, improper use or neglect;
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>