Soundcore by Anker- Life Note C Earbuds True Wireless Headphones-Complete Features/Owner’s Guide

Soundcore by Anker- Life Note C Earbuds True Wireless Headphones

Specifications

• INPUT : 5 V, 0.7A
• RATED OUTPUT POWER: 5mW @ 1% THD
• CHARGING TIME: 2 hours
• DRIVER SIZE: 8 mm x 2
• IMPEDANCE: 16 Ω
• BLUETOOTH VERSION: V 5.0
• BRAND: Anker
• COLOR: Black
• ASSEMBLED PRODUCT DIMENSIONS (L X W X H): 2.43 x 1.73 x 1.23 Inches

Introduction

Life Note C true wireless earbuds with built-in microphones and a unique AI algorithm for quality communications on both ends. Two microphones with noise reduction beamforming help decrease background noise and amplify your speech. Protect yourself against sweat and liquids in any weather. Your Life Note C true wireless earphones can last for 8 hours on a single charge. The charging case can recharge the phone four times, for a total of 32 hours. The Life Note C true wireless earbuds include a 10mm larger driver that produces 50% more bass. Feel the booming bass rhythm while maintaining clarity and treble.

Switch between Signature mode, which is suitable for all music genres, Bass Booster, which is wonderful for pounding sound, and Podcast, which is great for narrated content. Ultra-light earbuds with a tiny case that weighs only 1.3 oz (37 g) are ideal for all-day wear and listening on the go, whether you’re at the gym or at work.

WHAT’S IN THE BOX

• USB-C cable
• Life Note C Headphones/Black
• XS/S/M/L/XL Ear-Tips
• Charging Case
• Instruction Manual

HOW TO SETUP

For 3 seconds, press and hold the button on both earbuds. Three times the LED indicators will flash red before turning white. Turn on your phone’s Bluetooth. On the Bluetooth list, look for the device “Soundcore Life Note” or “Soundcore Life Note-L.”

CHARGING

• Fully dry off the earbuds and the USB port before charging.
• Use a certified USB-C charging cable and charger to prevent any damage.
• Fully charge both the earbuds and the charging case before the first use.
• Place the earbuds in the charging case and close it.
• Connect the charging case to the power supply by using a USB-C charging cable. Alternatively, position the charging case at the center of your wireless charger for wireless charging.

The LED indicators on the charging case indicate the charging status

WEARING

• Choose the EarTips and EarWings that fit your ears best.
• Insert the earbuds into the inner canal of your ears and turn gently until you find the most comfortable and secure position.

Your earbuds come with multiple pairs of eartips and EarWings, among which Medium-sized are pre-installed.

POWERING ON/OFF

The earbuds will automatically power on when taken out of the charging case.

• The LED indicator on the earbuds will light up white for 1 second.

To power off, place the earbuds in the charging case.

• The earbuds will automatically power off after 2 minutes if no device is connected.
• To manually power on, press and hold the multi-function button on both earbuds for 1 second until the LED indicator turns white for 1 second.
• To manually power off, press and hold the multi-function button on either earbud for 8 seconds until the LED indicator turns red for 1 second.

BLUETOOTH PAIRING

• Take the earbuds out of the charging case, the earbuds will automatically enter the Bluetooth pairing mode.

• The LED indicator on one earbud will flash white.
  

• Select “Soundcore Life A1” on your device’s Bluetooth list to connect.

• When successfully connected, the LED indicator on earbuds will flash white once every 5 seconds.

• When earbuds are out of the charging case and powered off, to manually enter Bluetooth pairing mode, press and hold the multi-function button on both earbuds for 3 seconds.

• Each time you power on your Soundcore earbuds, they will automatically connect to your last successfully connected device if available within the Bluetooth range.

• Mono mode: When Bluetooth connected, you can use either one of the earbuds only by placing the other one into the charging case.

• When powered on and connected, if either one of the earbuds is out of battery and powered off, you can keep using the other one.

• When you are on a call, place either one of the earbuds into the charging case, the microphone in the other earbud will be activated.

• The right earbud is the primary earbud by default. If you want to change this, remove the right earbud from your ear and place in the charging case, the microphone in the other earbud will be activated and become the primary earbud.

CONTROLS

Play/Pause| Press twice (R)
Next track| Press twice (L)
Adjust volume| Press once (L/R)
Adjust EQ settings

(Soundcore Signature/Bass Booster/Acoustic)

| Press three times (L/R)

Answer/End a call| ****

Press once (L/R)

Answer a second incoming call and put the current call on hold
Reject a call| ****

Press and hold for 1 second (L/R)

Transfer a call between earbuds and mobile phone
Switch between a call on hold and an active call

Activate Siri or other voice assistant software| Press and hold for 1 second (L/R)
| |

Mono mode

Play/Pause| ****

Press twice

Answer/End a call
Reject a call| ****

Press and hold for 1 second

Activate Siri or other voice assistant software

RESET

You might need to reset your earbuds if you experience any connectivity problems or function issues.

• Place the earbuds in the charging case and make sure they are being charged.
• Press and hold the button on both earbuds for 8 seconds until the earbud LED indicators flash red for 3 times.
• Take the earbuds out of the charging case and wait until the LED indicator on one of the earbuds flashes fast while the other breathes slowly. This confirms that the reset was successful and your earbuds can be connected normally.

Frequently Asked Questions

• What is the best way to pair Soundcore life Note C earbuds?
  Go to Settings > Connections on your Android device. When you enable Bluetooth, the grey switch will turn blue.
  Your phone will search for and display any available Bluetooth devices on the screen.
  Select Soundcore 2 from the list once it appears.

• How can I make both of my Soundcore life Notes earbuds work?
  Manually turn off both earphones;
  When earbuds are turned off, press and hold the button on both earbuds for 3 seconds. The left and right earbuds can then be connected to separate devices. see less You can only pair both earphones to one device if you use them both at the same time.

• What is the procedure for programming my Soundcore earbuds?
  Place the earbuds in the charging case, which should be left open. Press and hold the case’s button for 10 seconds until the three LED indicators flash white three times, then flash white in a continuous pattern. This indicates that the reset was successful and that your earbuds are now ready to use.

• Is it possible to use Soundcore earbuds with an iPhone?
  Bluetooth compatibility; works with all Bluetooth-enabled Macs, iPads, iPhones, and iPods. In practice, this implies all Macs, iPads, iPhones, and iPod touches.

• What is the procedure for connecting Anker Bluetooth headphones?

• When you turn on Bluetooth on your phone, it will search for Bluetooth-enabled devices in the area. From the options, choose the Anker SoundBuds Sport headset. The LED will remain blue if the pairing has been successful.

• My Soundcore earphones are not connecting.
  Return both earbuds to the charging case and close it, then remove them both and try again. If this doesn’t work, try the following: 1. Remove “Soundcore Liberty Air” from the Bluetooth list of the device you’re connecting to, then turn off the Bluetooth on your device.

• Why won’t my Soundcore connect?
  Your device will not be able to maintain a Bluetooth connection if it is out of range of your speaker. Remove any barriers between the speaker and your device, then attempt pairing again by moving your device as close as possible to your ANKER SoundCore.

• Can each earbud be connected to a separate device?
  The headphones may be associated with up to eight different devices, but they can only transmit and receive data from one at a time. As a result, “Multipoint” connections aren’t possible. You must switch the Bluetooth connection to the chosen device if the headset is associated with two or more devices.

• What is the procedure for resetting my Soundcore Life Note earbuds?
  For 3 seconds, press and hold the button on both earbuds. Three times the LED indicators will flash red before turning white.

• What is the procedure for turning on Soundcore Bluetooth earbuds?
  On/Off Switching
  When you open the charging case, the earphones will turn on automatically. When you put the earbuds back into the charging case and close it, the earbuds will turn off automatically. To turn the earphones on manually, press and hold the touchpad on one of them for 2 seconds, or until the LED indicator flashes white once.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>