Recon 200 Gen2 – Gaming headset User Guide
- June 5, 2024
- RECON
Table of Contents
- Recon 200 Gen2 – Gaming headset
- Headset Controls
- Setup for Xbox One
- Xbox One Volume Setup
- Xbox 0ne Surround Sound Setup
- PS4 Setup
- PC/Mac, Mobile/Tablet & Nintendo Switch Setup
- Charging
- [Federal Communications Commission IFCC] Compliance Notices](#Federal+Communications+Commission+IFCC%5D+Compliance+Notices)
- Canadian ICES Statements
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Recon 200 Gen2 – Gaming headset
Package Contents
Recon 200 Headset
Casque Recon 200
USB Charging Cable
Câble de chargement USB
Headset Controls
Mic Mute
Flip up the mic to mute
Setup for Xbox One
Note: The Recon 200 requires the Xbox One Controller with 3,5mm headset
jack. Purchase the Ear Force
Headset Audio Controller from turtlebeach.com for use with the original Xbox
One Controller.
Xbox One Volume Setup
- Press the Xbox button on your controller
- Go to the System tab
- Select Audio
- Set Headset Volume to maximum
- Set Headset Chat Mixer to the middle setting
- Set Mic Monitoring to minimum
Xbox 0ne Surround Sound Setup
- Press the Xbox Button on your controller
- Go to the System tab
- Select Settings>» Display& sound >> Audio Output
- Set Headset format to Windows Sonic for Headphones
PS4 Setup
- Go to Settings >> Devices >> Audio Devices
- Set Input & Output Device to Headset Connected to Controller
- Set Output to Headphones to All Audio
- Set Volume Control [Headphones) level to maximum
- Select Adjust Microphone Level and follow the on-screen
instructions to calibrate your microphone
PC/Mac, Mobile/Tablet & Nintendo Switch Setup
Note: If your PC uses separate Green/Pink connectors for audio you will
need
a PC Splitter Cable. This adapter is available online at turtlebeach.com
Charging
The Recon 200 uses a rechargeable battery. Make sure to charge it regularly.
Headset Storage:
Always charge your headset before storing it for an extended period of time
greater than 3 months). Never store the unit in temperatures above 113°F/45°C.
Federal Communications Commission IFCC] Compliance Notices
Class B Interference Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules, These limits are
designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed
and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will
not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on,
the user is encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: 1) This device may not cause harmful
interference, and |2) this device
must accept any interference received, including interference that may cause
undesired operation.
This product is compliant with the Consumer Product Safety Improvement Act of
2008, Public Law 110-314 ICPSIA
Canadian ICES Statements
Canadian Department of Communications Radio Interference Regulations
This digital apparatus does not exceed the Class B limits for radio noise
emissions from a digital apparatus as set out in the Radio Interference
Regulations of the Canadian
Department of Communications. This Class B digital apparatus complies with
Canadian ICES-003.
European Union and European Fair Trade Association Regulatory Compliance
This equipment may be operated in the countries that comprise the member
countries of the European Union and the European Fair Trade Association. These
countries,
listed below, are referred to as The European Community throughout this
document:
AUSTRIA, BELGIUM, BULGARIA, CYPRUS, CZECH REPUBLIC, DENMARK, ESTONIA, FINLAND,
FRANCE, GERMANY, GREECE, HUNGARY, IRELAND, ITALY, LATVIA,
LITHUANIA, LUXEMBOURG, MALTA, NETHERLANDS, POLAND, PORTUGAL, ROMANIA,
SLOVAKIA, SLOVENIA, SPAIN, SWEDEN, UNITED KINGDOM, ICELAND, LICHTENSTEIN,
NORWAY, SWITZERLAND
Declaration of Conformity
Marking by this symbol:
indicates compliance with the Essential Requirements of the Radio Equipment
Directive (RED] of the European Union (2014/30/EUI. This equipment meets the
following
conformance standards:
Safety:
- EN 60950-1: 2006+A11: 2009+A1:2010+A12: 2011+A2: 2014 (T-Mark License),
- EC 60950-1:2005 (2nd Ed.) + Am 1:2009+Am 2:2013 (CB Scheme Certificate,
- EN 50332-1:2013, EN 50332-2: 2013, EN 71-3:2013
Additional licenses issued for specific countries available on request
Emissions:
- EN 55032:2012, CISPR 32:2015
- EN 55024: 2010, CISPR 24: 2010
- EN 61000-4-2:2009, EN 61000-4-3:2006 +A1:2008+ A2:2010,
- EN 61000-4-8: 2010
Immunity:
These products are licensed, as required, for additional country-specific
standards for the
International Marketplace. Additional issued licenses are available upon
request.
Environmental:
Low Voltage Directive 2014/35/EU, RoHS 2011/65/EU, REACH 2006/1907/EC,
WEEE 2012/19/EU, Packaging 94/62/EC, Battery 2006/66/EC,
Toys Safety Directive 2009/48/EC
Warning! This is a Class B product. In a domestic environment, this
product may cause radio interference, in which case, the user may be required
to take appropriate measures
Please visit the following URL for a complete copy of the Declaration of
Conformity:
http://www.turtlebeach.com/homologation
This symbol on the product or its packaging indicates that this product must
not be disposed of with your other household waste.
Instead, it is your responsibility to dispose of your waste equipment by
handing it over to a designated collection point for the recycling
of waste electrical and electronic equipment. The separate collection and
recycling of your waste equipment at the time of disposal
will help conserve natural resources and ensure that it is recycled in a
manner that protects human health and the environment. For
more information about where you can drop off your waste for recycling, please
contact your local authority, or where you purchased
your product.
Turtle Beach Europe Ltd is obligated as a producer with a main activity of
selling under The Producer Responsibility Obligations (Packaging Waste)
Regulations 2007. To fulfill
Our obligation we are to register with Comply Direct and their Recycling Room.
Here you will find advice and information on packaging waste management,
recycling symbols, and the waste hierarchy principles of reducing, reusing,
and recycling.
https://www.complydirect.com/the-recycling-room/
Class B
(Broadcasting Communication Equipment for Home Use)
As electromagnetic wave equipment for home use (Class BI, this equipment is
intended to use mainly for home use and may be used in all areas.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>