RECON AIR 3347RX Chat Communicator Wireless User Guide

RECON AIR 3347RX Chat Communicator Wireless

SETUP

Connect mini transmitter to USB port.

It is recommended to insert the USB dongle into the USB port at the front of the PS5.

Press button to power on the headset.

Your headset and transmitter will pair automatically.

Go to Settings > Sound > Audio Output

Set Recon Air as your Output Device. Adjust Volume Control headphones to Maximum. Set Output to Headphones to Chat Audio.

Go to Settings > Sound > Microphone

Set Recon Air™ as your Input Device. The “Adjust Mic Level” setting can be used to adjust your microphone’s outbound volume.

IMPORTANT
Download the companion mobile app for iOS or Android to update your firmware as needed without having to wire in turtlebeach.com/audiohub

SCAN QR

PAIRING

Your Recon Air can pair to the transmitter and your mobile device simultaneously so you can answer calls during gameplay. Follow these instructions to pair to your mobile device

Power on the Recon Air headset, and double press the Multi Function Button to put the headset into mobile pairing mode.

Locate the headset within your phone or tablet’s Bluetooth settings and connect to it.

The headset and transmitter are paired out of the box, indicated by the solid LED on the transmitter. If your transmitter’s LED is double blinking blue, follow the steps to pair your headset and transmitter

1. Plug the transmitter into the console.
2. Press and hold the pairing button on the transmitter until the transmitter’s pairing LED flashes rapidly, then release.
3. Use a paperclip or something similar to press the pinhole button.
4. From the OFF position, press and hold the multi-function button for 5s until LED flashes red and blue to put the headset into pairing mode.
5. Keep the headset and transmitter close together until the LED indications are solid, indicating a successful pairing.

ADDITIONAL FEATURES

MULTI FUNCTION FEATURES

When the headset is ON and and paired to a mobile device, the multi-function button on the headset and its transmitter will allow you to switch between your console chat and a Bluetooth phone call.

CONTENTS

A Recon Air

Wireless Chat Communicator Recon Air

Recon Air Mini

Wireless Transmitter Eartips

USB Charging Cable

CONTROLS

Pair to mobile device
Pair to mobile device Power ON then double click.

EARTIP REMOVAL

To change the eartips pull firmly to remove. Choose the eartip that fits best, align with earbud, and stretch around the grill.

ADJUSTING THE EAR HOOK

To change the eartips, pull firmly to remove. Choose the eartip that fits best, align with earbud, and stretch around the grill

Regulatory Compliance Statements for Recon Air Wireless Chat P-RX

Local Restrictions on Radio Usage

Caution
Due to the fact that the frequencies used by wireless devices may not yet be harmonized in all countries, these radio products are designed for use only in specific countries, and are not allowed to be operated in countries other than those of designated use. As a user of these products, you are responsible for ensuring that the products are used only in the countries for which they were intended and for verifying that they are configured with the correct selection of frequency and channel for the country of use. Any deviation from the permissible power and frequency settings for the country of use is an infringement of national law and may be punished as such.
To determine whether you are allowed to use your wireless network device in a specific country, please check to see if the radio type number that is printed
on the identification label of your device is listed in the manufacturer’s OEM Regulatory Guidance document at the following URL
http://www.turtlebeach.com/homologation or contact Turtle Beach directly.

Federal Communications Commission (FCC) Compliance Notices

This section includes the following FCC statements for the Recon Air

• FCC ID: XGB-3347RX (Headset), XGB-3347TX Transmitter.
• Class B Interference Statement.
• Non-Modification Statement.
•  RF Radiation Exposure & Hazard Warning.

Class B Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. The limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment doesn’t cause harmful interference to radio or television reception, which can be diminished by turning the equipment off and on, the user is encouraged lo try to correct the interference by one or more of the following measures

•  Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

FCC Caution

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions. This device may not cause harmful interference, and  this device must accept any interference received, Including interference that may cause undesired operation.

RF Radiation Exposure & Hazard Statements

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not co-located or operating in conjunction with any other antenna or transmitter.

Non Modification Statement

Use only the supplied Internal antenna. Unauthorized anlennas modifications, or attachments could damage the Recon Air Models and violate FCC regulations. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
Please contact Turtle Beach for a list of approved 2.4 GHz antennas.

The Recon Air gives you 10 hours of rechargeable battery life. Make sure to charge it regularly before storing.

To prevent possible hearing damage, do not listen at high volume levels for long periods. This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions

• This device may not cause interference; and this device must accept any interference, including interference that may cause undesired operation of the device.

Radiation Exposure Statement

The product complies with Canada portable RF exposure limits set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available.

European Union and European Fair Trade Association (EFTA) Regulatory

Compliance

This equipment may be operated in the countries that comprise the member countries of the European Union and the European Fair Trade Association. These countries, listed below, are referred to as The European Community throughout this document: AUSTRIA, BELGIUM, BULGARIA, CYPRUS, CZECH REPUBLIC, DENMARK, ESTONIA, FINLAND, FRANCE,, GERMANY, GREECE, HUNGARY, IRELAND, ITALY, LATVIA, LITHUANIA, LUXEMBOURG, MALTA, NETHERLANDS, POLAND, PORTUGAL, ROMANIA, SLOVAKIA, SLOVENIA, SPAIN, SWEDEN, UNITED KINGDOM, ICELAND, LICHTENSTEIN, NORWAY, SWITZERLAND

Declaration of Conformity

Marking by  symbol indicates compliance with the Essential Requirements of the Electromagnetic Compatibility Directive, 2014/30/EU, Radio Equipment device, 2014/53/EU and Low Voltage Directive, 2014/35/EU. This equipment meets the following conformance standards

Safety

• EN 62368-1: 2014 (T-Mark License),
• IEC 62368-1: 2014 (CB Scheme certificate)
• EN 50332-1: 2013, EN 50332-2: 2013
• Additional licenses issued for specific countries available on request

EMC

• EN 55032:2015,CISPR 32: 2015
• EN 55035:201,CISPR 35 : 2016
• EN 301489-1V 2.2.3
• EN 301489-17 V3.1.1

Radio
EN 300 328 V2.2.1

SAR
EN 62479: 2010 The products are licensed, as required, for additional country specific standards for the International Marketplace. Additional issued licenses available upon request.

Environmental
REACH 2006/1907/EC, RoHS 2015/863 amending Annex II to Directive 2011/65/EU, WEEE 2012/19/EU, Packaging 94/62/EC, Battery 2006/66/EC

References

• Turtle Beach® Audio Hub - Download Firmware Updates for PC & Mac
• Turtle Beach Support
• Turtle Beach Support

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>