CamHipro SNO-NC60-4G5X-50-02 Professional WiFi IP Camera User Guide
- June 5, 2024
- CamHipro
Table of Contents
CamHipro SNO-NC60-4G5X-50-02 Professional WiFi IP Camera
About camera
Product introduction.
This is a HD IP camera for monitoring. It connects to the Internet to send and
receive data, you can use it to remotely view real-time images from your
mobile phone, computer or other device anytime and anywhere, it can save
surveillance videos in the Micro SD card, computer or other device, The camera
also supports alarm functions such as sending alarm emails, alarming phone
message push and other functions.
1.2 Product should contain:
- IP Camera
- Power adapter
- User manual
- Network cable
- WIFI Antenna
- Screws bag
Product interface.
Connect camera
Connect network cable to router and plug in power adapter.
Connect network cable and power to the camera, it needs about afew minutes to
self checking and then start working.
Network indicator light (green): always flashing means network data
transmission is normal.
View via mobile phone
Download “CamHipro” from Google Play Store / Apple App Store or scan the QR code below to get APP information.
Run APP and Add Camera.
- Connect the wireless antenna to camera and power it.
- Wait 30 seconds, go to setting and find hotspot (IPCAM-XXXXXX) from camera, enter password ‘01234567’ to connect.
- Open the APP ‘CamHiPro’, click ‘Add Camera’ to add new device
- Follow the step, add ‘AP equipment
’ - Wireless configuration, connect to your own WIFI nearby
- Wait 30~40 seconds, camera will connect to your WIFI automatically
- Connect camera successfully
After adding the camera, click online camera to view real-time
image.
View via PC
Install the “Search tool” , then run it to find the cameras.
Click “Next” can modify network parameters of the camera.
Access to the camera via browser on windows PC.
Connect and manage the multiple cameras via CMS on windows PC!
Set WIFI
Set WIFI on phone.
Set WIFI via browser on PC.
Set Micro SD card record
TF card needs to be formatted first and installed on the camera
correctly.
Set motion detection alarm recording on the phone.
Set schedule recording on phone.
Playback record on phone.
Reboot and restore factory settings
Reboot and restore factory settings
Press and hold the reset button for 15 seconds and the camera will restore to
factory settings.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>