Gude GRP 90 Vibrating Plate Instruction Manual

Gude GRP 90 Vibrating Plate

DELIVERED ITEMS

Assembly

Oil level inspection

Check the oil level whenever the appliance is to be put into operation. Add engine oil if necessary. Check the oil level whenever the appliance is to be put into operation. Add
engine oil if necessary

To ensure quality, every piece of equipment is subject to a test operation and filled with motor oil. Oil is drained before transport; however, there can be some motor oil remains on the dip stick. Please check carefully the oil level and add motor oil again.

Fuel tank filling

Rubber mat

Working instructions

Operation – START

Operation – STOP

V-belt tensioning

Spark plug

Oil change

Air filter

Technical Data

Noise details
Sound pressure level LpA

| 89,9 dB (A)
Measured sound power level L 1)

WA

| 102 dB (A)
Guaranteed sound power level LWA| 105 dB (A)
Measured according to EN ISO 3744, 2000/14/EG+ 2005/88/EG; 1) Uncertainty K = 2,5 dB (A)
Wear ear protectors!|
Vibration details

Vibration total values (triaxial vector sum) determined according to EN 500:

Vibration emission value ah| 13 m/s²
Uncertainty K = 1,5 m/s2

WARNING:

• The vibration emission level will vary because of the ways in which a power tool can be used and may increase above the level given in this information sheet.
• The vibration emission level may be used to compare one tool with another.
• It may be used for a preliminary assessment of exposure.
• An accurate estimate of the vibratory load should also take into account the times when the tool is shut down or when it is running but not actually in use. This may significantly reduce the vibratory load over the total working period.
• Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep the hands warm, organisation of work patterns.
• Read and understand the operating instructions before using the appliance. Familiarise with the control elements and how to use the appliance properly. Abide by all the safety measures stated in the service manual. Act responsibly toward third parties.
• The operator is responsible for accidents or risks to third parties.
• In case of any doubts about connection and operati-on refer please to our customer center
• Persons over 18 years of age can only work on the appliance. An exception includes youngsters trained in order to reach knowledge under supervision of the trainer during occupational education.
• This appliance has not been designed to be used by persons (including children) with reduced physical, sen-sory or mental capabilities or with a lack of knowledge or experience.
• Children must be supervised in order not to play with the machine.

Specified Conditions Of Use

• The vibrating plate is exclusively intended to be used for compressing small to medium areas, foundations, terraces, pavements and driveways made of the following materials: sand, shingle, gravel, crushed stone, asphalt, low-cohesive mixing materials
• The following materials require the use of a rubber mat: paving stones, bricks
  • The machine is intended only for use on construction sites where on-site conditions are conducive to the use of machinery.
  • Always place the unit on a firm and flat surface! Please ensure that the machine does not tip over, slide or fall during use.
  • Please maintain enough distance from the secured edges of the construction pit as well as any em-bankments.
  • The machine must never be used on a slope.
  • Do not work with the unit in an environment with a risk of explosion where there are flammable liquids, gases or dust.
  • The machine must never be used in deep pits, tunnels or caves (> 1.5  m).
  • The work site must be free of electric cables as well as gas and water lines that could sustain damage from the vibrations.
• Not observing general regulations in force and instructions from this manual does not make the manufacturer liable for damages.
• The machine may only be used in a technically perfect condition and taking into account all safety information.
• The use of the machine is at the discretion of the operator; use at your own risk.

Residual risks

Even when the device is used properly and all safety regulations are complied with, there still may be some residual risks.

Risk of fire!

• Never operate the unit near highly flammable materials.
• Fuel is highly flammable.
• Keep the fuel in suitable containers only.
• The appliance may only be refuelled outdoors and not near open fire or burning cigarettes.
• Refuel the engine only when switched off. Refuel before starting the appliance. If the engine is run-ning or still hot, it must not be refuelled or the tank cover opened.
• After use, let the unit cool down for at least 10 minutes before refuelling.
• Make sure the fuel does not overflow. If the fuel overflows, the engine must not be started. Remove any dirt from the appliance and prevent any at-tempt at ignition until fuel fumes have evaporated..
• Replace all fuel tank and container caps securely.
• Fuel tank to be emptied outdoors only.

Risk of poisoning!

• Exhaust gases, fuel and lubricants are toxic. Inhaling exhaust gases may be fatal!
• Do not operate the unit in closed spaces where dan-gerours carbon monoxide gases may accumulate.

Risk of explosion!!

• Petrol and petrol vapours are highly flammable, explosive.
• Do not work with the unit in an environment with a risk of explosion where there are flammable liquids, gases or dust.
• Refuel the engine only when switched off.
• Do not store any fuel near the unit.
• Never keep the unit with petrol in the tank inside a building where petrol vapours could get in contact with open fire or sparks.

Hearing damage
A longer stay in the immediate vicinity of the running unit may cause hearing damage. Wear ear protectors!

Risk of crushing
Keep hands and feet away from moving parts. Wear safety shoes with steel reinforcement!

Damage to health arising from vibrations to hand and arms if the device is used for a long time or if the device is not guided and evaluated properly.
Vibration damping systems are no guaranteed pro-tection against white finger disease or carpal tunnel syndrome. Therefore, it is necessary to carefully check the state of your fingers and wrist if you have regular-ly used the appliance for a long time. If any symptom of the diseases above appears, seek medical advice immediately. To reduce the white finger disease risk, keep your hands warm and take regular breaks during your work.

Danger of burns !
Some parts of the appliance get too hot when the appliance is operated. Do not touch any hot parts, e.g. engine and muffler. Contacting hot parts of the unit may cause burns. Pay attention to the warnings on the advice.

Emergency procedure

Conduct a first-aid procedure adequate to the injury and summon qualified medical attendance as quickly as possible. Protect the injured person from further harm and calm them down. If you seek help, state the following pieces of information: 1. Accident site, 2. Accident type, 3. Number of injured persons, 4. Injury type(s)

Safety instructions

WARNING

• Read all safety warnings and all instructions.  Failu-re to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.
• Keep children and bystanders away while operating a power tool.  Minimum safe distance is 5 m.
• Keep bystanders a safe distance away from work area. Anyone entering the work area must wear personal protective equipment.
• Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropri-ate conditions will reduce personal injuries.
• Check carefully the terrain where the appliance is being used and remove any items that could get caught and be thrown away.
• Poor lighting/light conditions represent a high safety risk. Provide adequate lighting or good lighting con-ditions when working with the machine.
• Before work can begin, operators must familiarise themselves with the work site. Elements of the work site include, for example, obstacles around the site or in the surrounding traffic, the load bearing capacity of the earth and ensuring the construction site is safe and secured.
• Safe operation requires sufficient operator knowledge of the functions and positions of the controls and indicators or meters. Pay attention to the illustrated pages in the front section of the manual.
• The appliance should only be used when in a perfect state. Carry out a visual inspection before swit-ching the appliance on. Check especially the safety equipment, electrical control elements, power lines and screw couplings for any damage and if they are tightened appropriately. Replace any damaged parts before the appliance is put into operation if necessary.
• The appliance must not be used if damaged or safety equipment is defective. Replace any worn-out and damaged parts.
  • It is strictly prohibited to disassemble, modify and purposely remove the protective equipment on the unit and fit other protective equipment instead.
• No change can be made in respect of engine and unit setting.
• When working with this machine, do not use spare parts other than those recommended by us. Using spare parts not recommend by us can result in seri-ous injuries to persons or damage to the machine.
• Oil products must not come into contact with skin, eyes and clothing.
• Transport and storage
• Secure the device against shifting and toppling during transport.
• Take care to prevent from fuel and oil leakage during transport.
• Handling equipment to be used only when handling the machine.
• The load bearing capacity of the earth must be high enough to carry the weight of the machine.
• It is prohibited to stand or work under suspended loads.
• Do not store the appliance in enclosed places just after being switched off but let it cool down outdoors instead.
• Machine to be stored in a dry place.When the appli-ance is not going to be used for a long time, store it with an empty tank.

Symbols

Maintenance

Switch the engine off and remove the socket plug before any work on the engine. Wait until the unit has cooled down.

• Keep the device, in particular the air vents, clean at all times. Never spray water on the device body!
• Do not clean the plastics with solvents, flammable or toxic fluids. For cleaning, use a damp cloth only. Repairs and works specified in these Instructions may only be performed by qualified authorised staff.
• Use only original accessories and original spare parts.
• Carry out a visual inspection before switching the appliance on.
• Check especially the safety equipment, electrical control elements, power lines and screw couplings for any damage and if they are tightened appropriately.
• Only a regularly maintained and treated appliance can serve as a satisfactory aid. Insufficient mainte-nance and care can lead to unforeseen accidents and injuries.
• If necessary, a list of spare parts can be found at www.guede.com.

Guarantee

• Warranty period of 12 months applies to commercial use and 24 months applies to private use and com-mences on the day of purchase of the device.
• The guarantee solely covers inadequacies caused by material defect or manufacturing defect. Original payment voucher with the sales date needs to be sub-mitted for any claim in the guarantee period.
• The guarantee does not cover any unauthorised use such as appliance overloading, use of violence, damage as a result of any unauthorised interference or caused by foreign items. Failing to follow the ope-rating and assembly instructions and common wear are also not included in the guarantee.

Important information for the customer
Please be sure to know that returning the product in or after the warranty period must be made in the original packaging.

Service

Do you have any technical questions? Any claim? Do you need any spare parts or operating instructions?
We will quickly help you and without needles bureau-cracy at our web pages at www.guede.com in the Servicing part. Please help us be able to help you. In order to identify your device in case of claim we need the serial No., product No. and year of production. All this data can be found on the type label.

• Tel.: +49 (0) 79 04 / 700-360
• Fax: +49 (0) 79 04 / 700-51999
• E-Mail: support@ts.guede.com

Inspection and maintenance plan

Repairs and works specified in these Instructions may only be performed by qualified authorised staff. Use only original accessories and original spare parts.

Tip: To ensure reliable operation of the appliance, we strongly recommend using fuel additives and performing 2-3 test operations after a longer time of not using the unit.

Failure removal

On/Off are in the „ON“ position
---|---|---
Lack of fuel| Add some fuel
Weak tension on the starter| Pull strongly the starting cord.
Wrong fuel, storing without petrol tank being drained| Drain the fuel tank and carburettor, add fresh petrol
Sooted spark plug (carbon residues on electrodes), electrodes distance too big| Clean the spark plug, check the plug thermal value, possibly change the plug, set the electrodes distance to 0.6-0.7 mm
The spark plug is wet from petrol (over- saturated engine).| Dry the spark plug out and refit it.
Little oil in the engine| Add oil
Unit is not in a horizontal position. Lack of oil being signalled| Place the unit in a horizontal position
Choke has not been used| Use the choke
Engine running irre- gularly| Problem with ignition| Make sure the spark plug is fitted pro- perly. Make sure the spark plug cable is on the spark plug. Clean the spark plug and check the electrodes if correct.
Wrong fuel (propellant)| Make sure proper fuel has been used.

ABOUT COMPANY

• GÜDE GmbH & Co. KG Birkichstrasse 6
• 74549 Wolpertshausen Deutschland
• Tel.: +49-(0)7904/700-0
• Fax.: +49-(0)7904/700-250
• eMail: info@guede.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>